Brother Printers Mfc 7750 Laser 600x600dpi Super G3 Fax Owners Manual

117USING THE MFC WITH YOUR COMPUTER
Installing Multi-Function Link Pro
Software (CD-ROM) (For MFC 4650,
MFC 6650MC and MFC 7750 Only)
IMPORTANT
To install the software using Windows NT¨ Workstation Version 4.0,
you must be logged on as the Administrator.  After Multi-Function Link
Pro is installed, restart Windows NT
¨  a second time and again log in as
the Administrator, so you can complete the Remote Setup application.
After you have completed Remote Setup, log in using your normal User
name.
Overview...

118CHAPTER THIRTEEN
Choosing the Software to Install
Install Multi-Function Link Pro Software
If you want the complete set of software: Multi-Function Link Pro,
Visioneer PaperPortª LE viewer, and Brother scanner driver, printer
drivers and True Type Compatible fonts, install:
nInstall Multi-Function Link Pro Software
Install NetCentricª FaxStorm
If you want to be able to send Internet faxes from your computer anytime,
anywhere without using your MFC, install:
nNetCentricª FaxStorm
Install Automatic...

119USING THE MFC WITH YOUR COMPUTER
Installing the Brother Software
1Insert the Brother CD-ROM into your CD-ROM drive.
2Enter the command for your version of Windows¨, if needed.
After you insert the Brother CD-ROM, you must type the appropriate
command for your version of Windows
¨:
¥ If you are using Windows
¨ 3.1 or 3.11, from the Program
Manager: click File, then Run, then type x:SETUP.EXE. (ÒxÓ is
the drive letter for your CD-ROM drive.) This will start the
Software Installation program.
¥ If you...

120CHAPTER THIRTEEN
A window appears listing the options:
For each application you install, click on that name in the Software
Installation window and follow the instructions on the screen. The last step
will be to restart Windows
¨ and access the Software Installation window
again to install the next application.
3Click on ÒInstall Multi-Function Link Pro SoftwareÓ  and follow the
prompts on the screen.
If you are using Windows¨ 95, after you install the Brother MFC Drivers
you may see ÒNew Hardware...

121USING THE MFC WITH YOUR COMPUTER
The On-Line Documentation window appears:
5In the On-Line Documentation window, click on ÒInstall Acrobat
ReaderÓ and follow the prompts on the screen. You must install Acrobat
Reader before you can view on-line documentation.
Helpful Hints for Windows¨ 3.1, 3.11 or 
Windows¨ 95, 98
nThe installer automatically updates your SYSTEM.INI Windows¨ file by
adding DEVICE=bi-di.386 under the [386Enh] section. If any
bi-directional parallel communications device driver has...

122CHAPTER THIRTEEN
For DOS Users
How to Use the MFC with Your DOS Application
Software
Before working with your application software that runs on DOS, check that
the  MFCÕs name appears in the printer selection of your application
software. If the MFC is not listed, you must install the printer driver that
corresponds to HP LaserJet IIPÕs emulations.
The following table shows combinations of printer drivers and emulation
mode. To get the most out of this MFC, you should install an HP printer
driver in...

123USING THE MFC WITH YOUR COMPUTER
What Does the Remote Printer Console Do?
The Remote Printer Console (RPC) is a utility program that can run in the
DOS environment and comprises the following two programs:
Remote Printer Console Main Program
This program allows you to change various printer settings such as
emulation, print quality, fonts, page setup etc., from your computer screen.
Since most DOS applications have a Printer Settings menu that overrides
the settings made by the RPC, you may not have...

124CHAPTER THIRTEEN
4At the DOS prompt (C:\>) type x: (Substitute the drive letter of your
CD-ROM drive for ÒxÓ) and press Enter.
C:\>x:
5Type CD:\YL-II\WIN3X\MFLPRO\DRIVERS\DISK3 and press Enter.
(Ò3XÓ is Windows
¨ 3.1 or 3.11)
x:\>CD:\YL-II\WIN3X\MFLPRO\DRIVERS\DISK3
6Type RPCSETUP and press Enter.
x:\YL-II\WIN3X\MFLPRO\DRIVERS\DISK3>RPCSETUP
7Follow the instructions from the installer.
Using the Remote Printer Console Main Program
Type C:\RPCX>RPCX and press the Enter key to start the Remote Printer...

125USING THE MFC WITH YOUR COMPUTER
There are four sub menus (see table below). Select the sub menu you want
by clicking on it with the mouse, using the cursor keys and the Enter key,
or by pressing the hot key commands for that sub menu.
Menu Press the keys Functions
DirectAlt + DYou can directly control the MFC, with Print
Access Form, Reset Printer.
PrinterAlt + PYou can enter the setting mode to change other
Setup printer settings, such as, margin settings,
continue mode, reprint function, font and...

126CHAPTER THIRTEEN
Remote Printer Console
Current Printer Status Information
Item Default What This Item Does
Media Type Regular Selects the media type ÒRegularÓ or ÒThick
PaperÓ.
Emulation*1 Laser Jet IIP ÒLaser Jet IIPÓ.
Paper Size*1 Letter Selects the paper size, either ÒLetterÓ,
ÒLegalÓ, ÒA4Ó, ÒB5Ó, ÒDLÓ, ÒExecutiveÕÕ,
ÒCOM10Ó, ÒMonarchÓ or ÒC5.Ó
Orientation*1 Portrait Selects the paper direction, either ÒPortraitÓ
or ÒLandscape.Ó
Quality*1 Normal Selects the print quality, either ÒNormalÓ or...