Avaya Partner Advanced Communications System Installation, Programming And Use Manual

Programming System Options
Pool Programming
4-45
Programming
Follow these steps to change the mode of operation of the system to Hybrid mode:
1. Press 
f00ss#198.
2. Enter the system password which is 863285.
3. Enter the number for the mode of operation:

1 for Key (the factory setting) ✔ 

2 for Hybrid
The system resets.
Pool Access Restriction (#315)
Use this feature to restrict a pooled extension from receiving and/or making outside calls on all 
lines belonging to a specific pool. For example, you...

PA R T N E R® Advanced Communications System Installation, Programming, and Use
Pool Programming
4-463. Enter the pool number (880, 881, 882, or 883) to be restricted at this extension. The current 
restriction is displayed.
4. Press 
D until the appropriate value appears:

1 = No Restriction (calls permitted on all lines in that pool; the factory setting) ✔ 

2 = Out Only (can only make outside calls, not receive them, on lines in that pool)

3 = In Only (can only receive calls, not make them, on lines...

Programming System Options
Pool Programming
4-47

Users must have access to an outside line or pool in order to dial numbers on the Emergency 
Phone Number List (#406).

You can use Line Ringing to identify when each pool and individual line assigned to an 
extension should start ringing (the factory setting for pools is No Ring and for lines is 
Immediate Ring).

If you want to prevent a user at an extension from accessing all the lines in a pool, you must 
restrict the extension using Pool Access...

PA R T N E R® Advanced Communications System Installation, Programming, and Use
Pool Programming
4-485. Do one of the following:

To assign another pool for this extension, press n or p until the pool access 
code appears on the display. Then repeat Step 4.

To program another extension, press N + P and begin at Step 2.
6. Select another procedure, or exit programming mode.
Pool Line Assignment (#207)
Use this feature to assign lines to or remove lines from the main and auxiliary pools supported for...

Programming System Options
Recall Timer Duration (#107)
4-49 4. To program another line, press 
n or p until the line number appears on the 
display. Then repeat Step 3.
5. Select another procedure, or exit programming mode.
Recall Timer Duration (#107) 
Use this feature to change the length of the timed signal, or switchhook flash, generated by the 
system Recall feature (as well as by the Recall option used in Auto Dial and Speed Dial 
numbers). Recall sends this timed signal over the telephone line to...

PA R T N E R® Advanced Communications System Installation, Programming, and Use
Remote Administration Password (#730) –Release 3.0 or Later
4-504. If you are using Recall to access PBX or Centrex features, test the new Recall Timer setting:

If a call is disconnected, shorten the time.

If the Recall signal has no effect, lengthen the time.
Remote Administration Password (#730)
–Release 3.0 or Later
Use this feature to create a password for remote or local PC administration of the system (except 
for the...

Programming System Options
Ring on Transfer (#119)
4-51
Ring on Transfer (#119) 
Use this feature to specify what callers hear while they are being transferred. If Ring on Transfer 
is set to Active, callers hear ringing as they are being transferred; if it is set to Not Active, callers 
hear silence unless Music-On-Hold is activated and an audio source is connected to the system. 
If this is the case, callers hear music while the call is being transferred to the destination extension. 
Once there,...

PA R T N E R® Advanced Communications System Installation, Programming, and Use
Star Code Dial Delay (#410)
4-52
Programming
To change the length of the Rotary Dialing Timeout:
1. Press 
f00ss#108 at extension 10 or 11. 
2. Press 
D until the appropriate value appears:

1 = 4 seconds

2 = 8 seconds (the factory setting) ✔ 

3 = 12 seconds
3. Select another procedure, or exit programming mode.
Star Code Dial Delay (#410) 
Central offices of some telephone companies support the use of star codes before the...

Programming System Options
Star Code Dial Delay (#410)
4-53 if the tone is delayed, the caller should wait for the dial tone before continuing to dial. The system 
may not recognize the numbers dialed before the second dial tone, which may cause the call to be 
misrouted. 
Use the Star Code Dial Delay setting to force a delay in Auto Dialed calls after the star code so 
that the system waits to dial the rest of the digits until the second dial tone begins. You can 
program an automatic pause of 0 to 5...

PA R T N E R® Advanced Communications System Installation, Programming, and Use
System Password (#403)
4-54

3 = 3 Seconds Delay

4 = 4 Seconds Delay

5 = 5 Seconds Delay

6 = Not Active
3. To return to the default setting, press 
r.
4. Select another procedure, or exit programming mode.
System Password (#403) 
Use this feature to define a four-digit password that users can enter from PARTNER and MLS 
telephones to override dialing restrictions (if the extension has access to an outside line)....