Avaya Partner Advanced Communications System Installation, Programming And Use Manual

Programming System Options
Call Waiting (#316)
4-15
Programming
To change the Call Waiting setting for an extension:
1. Press 
f00ss#316 at extension 10 or 11.
2. Enter the number of the extension to be programmed.
3. To assign or unassign Call Waiting, press 
D until the appropriate value appears.

1 = Assigned

2 = Not Assigned (the factory setting) ✔ 
4. To program another extension, press 
n or p until the extension number appears 
on the display. Then repeat step 3.
5. Select another procedure, or...

PA R T N E R® Advanced Communications System Installation, Programming, and Use
Copy Settings (#399)
4-16
Copy Settings (#399)
Set up your system by programming one extension for each type of telephone in the system. Then 
use Copy Settings (#399) to program other telephones of the same type. For example, you can 
program one PARTNER-18D telephone and then copy its settings to any other extensions that 
have PARTNER-18D or PARTNER-18 telephones.
Use this feature to copy all of the following settings from...

Programming System Options
Dialing Restrictions and Permissions
4-17
Programming
To copy the programmed settings from one extension to another of the same type:
1. Press 
f00ss#399 at extension 10 or 11. 
2. At the 
Extension: prompt, enter the source extension to copy from.
3. At the 
Data- - - - - - - - - - - - prompt, enter the target extension to copy to–any 
extension except the source extension is valid. 
4. Do one of the following:

To copy the same settings to another extension, enter the new...

PA R T N E R® Advanced Communications System Installation, Programming, and Use
Dialing Restrictions and Permissions
4-18
Considerations

For specific telephone numbers, enter the number exactly as you would dial it. To restrict 
dialing numbers in an entire area code, enter that area code exactly as you would dial it (for 
example, “800” or “1800”).

After programming the Allowed Phone Number Lists, you must use Allowed List 
Assignments (#408) to assign the lists to specific extensions.

Allowed Phone...

Programming System Options
Dialing Restrictions and Permissions
4-19
Allowed List Assignments (#408)
Use this feature to assign up to eight Allowed Phone Number Lists to a specific extension.You 
must use Allowed Phone Number Lists (#407) to create the lists of allowed telephone numbers 
before you use this procedure.
Programming
To assign Allowed Phone Number Lists to an extension:
1. Press 
f00ss#408 at extension 10 or 11.
2. Enter the number of the extension to be programmed.
3. Enter the list number...

PA R T N E R® Advanced Communications System Installation, Programming, and Use
Dialing Restrictions and Permissions
4-20

To prevent dialing all telephone numbers in one exchange when a toll prefix is required, see 
Ta b l e 4 - 1. (The table uses exchange “976” as the example.)

To prevent dialing all telephone numbers in one exchange when no toll prefix is required, see 
Ta b l e 4 - 2. (The table uses exchange “976” as the example.)

To prevent international calls, enter the international prefix...

Programming System Options
Dialing Restrictions and Permissions
4-21

The entries you must make to permit or restrict toll calls differ depending on the setting for Toll 
Call Prefix (#402). 

If Star Code Dial Delay (#410) is active, after a valid star code is dialed, the system resets the 
dialing restrictions to check the number beginning with the first digit after the star code.

If you want to go to another programming procedure when entering telephone numbers in a 
list, you must press 
N + P,...

PA R T N E R® Advanced Communications System Installation, Programming, and Use
Dialing Restrictions and Permissions
4-22
Disallowed List Assignments (#405)
Use this feature to assign up to eight Disallowed Phone Number Lists to specific extensions.
Considerations

You must use Disallowed Phone Number Lists (#404) to create the lists of disallowed 
telephone numbers before you use this procedure.

When a Disallowed Phone Number List is assigned to an extension, the list applies to all 
lines to which the...

Programming System Options
Dialing Restrictions and Permissions
4-23
Considerations

For pooled extensions, use Pool Access Restriction (#315) to assign restrictions to all the 
lines assigned to a specific pool. (Pool Access Restriction overrides Line Access 
Restriction.) For individual lines on pooled extensions, use Line Access Restriction.

To prevent an extension from using a line, restrict the line even if it is not assigned to the 
extension, so the line cannot be accessed by Direct Line Pickup....

PA R T N E R® Advanced Communications System Installation, Programming, and Use
Dialing Restrictions and Permissions
4-24
Outgoing Call Restriction (#401) 
Use this feature to specify the types of outgoing calls that can be made on all lines at an extension.
Considerations

If the system is connected to a PBX or Centrex system and a dial-out code (usually 9) is 
needed to place calls outside the PBX or Centrex system, the control unit may not be able to 
prevent calls for extensions restricted to Local...