Home > Apple > Notebook > Apple macbook pro 17 inch mid 2010 User Manual

Apple macbook pro 17 inch mid 2010 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Apple macbook pro 17 inch mid 2010 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							MacBook Pro (17-inch, Mid 2010) Take Apart — Left Speaker 201 2010-06-11
    First Steps
    Remove:
    • Bottom case
    • Memory
    • Fans
    • Logic board
    Before you begin this 
    procedure, disconnect 
    the battery from the 
    logic board. Failure to 
    do so could damage the 
    computer.
    Left Speaker  
    						
    							MacBook Pro (17-inch, Mid 2010) Take Apart — Left Speaker 202 2010-06-11
    Tools
    • Clean, soft, lint-free 
    cloth
    • ESD wrist strap and 
    mat
    • Magnetized Phillips 
    #00 screwdriver
    • Black stick
    Removal
    Note: Do not touch the 
    soft speaker cone. 
    1 Disconnect 2 cables:
    • microphone
    • speaker  
    						
    							MacBook Pro (17-inch, Mid 2010) Take Apart — Left Speaker 203 2010-06-11
    2 Remove 2 (8-mm) 
    922-8720 screws.
    Replacement Note: If 
    replacing the speaker, 
    transfer microphone 
    cable to replacement 
    speaker.  
    						
    							MacBook Pro (17-inch, Mid 2010) Take Apart — Microphone Cable 204 2010-06-11
    First Steps
    Remove:
    • Bottom case
    • Memory
    • Fans
    • Logic board
    • Left speaker
    Before you begin this 
    procedure, disconnect 
    the battery from the 
    logic board. Failure to 
    do so could damage the 
    computer.
    Tools
    • Clean, soft, lint-free 
    cloth
    • ESD wrist strap and 
    mat
    • Black stick
    Microphone Cable  
    						
    							MacBook Pro (17-inch, Mid 2010) Take Apart — Microphone Cable 205 2010-06-11
    Removal
    Note: Do not touch the 
    soft speaker cone. 
    1 Unroute microphone 
    cable.
    Replacement Note: 
    When transfering 
    microphone cable to 
    speaker, make sure 
    cable is recessed 
    within speaker body.
    2 Turn over speaker, 
    and carefully pry up 
    the microphone 
    gasket.  
    						
    							MacBook Pro (17-inch, Mid 2010) Take Apart — ExpressCard Cage 206 2010-06-11
    First Steps
    Remove:
    • Bottom case
    • Memory
    • Fans
    • Logic board
    • Rear hard drive bracket
    Before you begin this 
    procedure, disconnect 
    the battery from the 
    logic board. Failure to 
    do so could damage the 
    computer.
    ExpressCard Cage  
    						
    							MacBook Pro (17-inch, Mid 2010) Take Apart — ExpressCard Cage 207 2010-06-11
    Tools
    • Clean, soft, lint-free 
    cloth
    • ESD wrist strap and 
    mat
    • Magnetized Phillips 
    #00 screwdriver
    • Black stick
    Removal
    1 Remove 6 screws:
    • 2 (4-mm) 922-8981
    • 2 (1.92-mm) 922-8984
    • 2 (2.2-mm) 922-8329  
    						
    							MacBook Pro (17-inch, Mid 2010) Take Apart — ExpressCard Cage 208 2010-06-11
    2 Carefully peel up flex 
    cables from card cage.
    3 Lift card cage from 
    the top case.
    Replacement Note: 
    Carefully move aside flex 
    cables to slide card cage 
    into place.  
    						
    							MacBook Pro (17-inch, Mid 2010) Take Apart — Top Case 209 2010-06-11
    First Steps
    Remove:
    • Bottom case
    • Battery
    • Rear hard drive bracket
    • Hard drive
    • Memory
    • Camera cable guide
    • LVDS cable guide
    • Fans
    • AirPort-Bluetooth 
    holder
    • AirPort-Bluetooth card
    • Optical drive
    • Display assembly
    • Right speaker/
    subwoofer
    • Logic board
    • Hard drive connector 
    cable
    • MagSafe board
    • ExpressCard cage
    • Front hard drive 
    bracket
    Top Case  
    						
    							MacBook Pro (17-inch, Mid 2010) Take Apart — Top Case 210 2010-06-11
    Tools
    • Clean, soft, lint-free 
    cloth
    • ESD wrist strap 
    • Magnetized Phillips 
    #00 screwdriver.
    Removal
    With the first steps 
    completed, the top case 
    with keyboard is the 
    remaining part.
    The top case includes:
    • battery indicator light 
    (BIL) board and cable
    • IR/sleep indicator cable
    • hard drive connector 
    cable
    • center bracket
    Replacement Note: 
    Before assembling the 
    computer, be sure to first 
    transfer the ExpressCard 
    cage to the new top case.  
    						
    All Apple manuals Comments (0)

    Related Manuals for Apple macbook pro 17 inch mid 2010 User Manual