Xerox Phaser 6180MFP User Manual

Printing on Specialty Media
Phaser® 6180MFP Multifunction Printer 
5-28
Printing Envelopes
Envelopes can be printed only from Tray 1 (MPT). 
Guidelines
■Use only paper envelopes specified in the Supported Paper Sizes and Weights table. 
Successful envelope printing is highly dependent on the quality and construction of the 
envelopes. Use envelopes made specifically for laser printers.
■It is recommended that you maintain constant temperatures and relative humidity.
■Store unused envelopes in their...

Printing on Specialty Media
Phaser® 6180MFP Multifunction Printer 
5-29
Loading Envelopes
To load envelopes, insert the envelopes with the flaps closed and at the right side. The print 
side must be facing down. You can load envelopes up to the maximum fill line in the tray at 
one time.
The following explains how to load envelopes in Tray 1 (MPT) using Monarch as an example.
Note: The reverse side of the envelope cannot be printed on. Envelopes can get wrinkled or 
the print quality is reduced depending...

Printing on Specialty Media
Phaser® 6180MFP Multifunction Printer 
5-30
Printing on Envelopes
When MPT Mode is set to Panel Specified, you need to set the paper type and size settings 
for the tray on the control panel in advance. See Setting Paper Types and Sizes on page 5-9.
The way to display the printer Properties dialog box differs according to the application 
software. Refer to the manual of your respective application software.
Using the PostScript Driver
To print on envelopes using the...

Printing on Specialty Media
Phaser® 6180MFP Multifunction Printer 
5-31
Printing Labels
Labels can be printed from all trays.
To order paper, transparencies, or other specialty media, contact your local reseller or go to 
www.xerox.com/office/6180MFPsupplies
.
 
See also: 
About Paper on page 5-6
Guidelines
■Do not use vinyl labels.
■Print only on one side of the sheet of labels.
■Do not use any sheet where labels are missing; it may damage the printer.
■Store unused labels flat in their original...

Printing on Specialty Media
Phaser® 6180MFP Multifunction Printer 
5-32 2.Open the paper guides.
3.Fan the labels to release sheets that are stuck together.
4.Insert the labels into Tray 1 (MPT), and adjust the paper guides to fit the sheets.
■Place the side to be printed facedown with the top of the sheets entering first.
■Do not load more than 25 sheets.
6180mfp-017
6180mfp-011
6180mfp-018
Downloaded From ManualsPrinter.com Manuals 

Printing on Specialty Media
Phaser® 6180MFP Multifunction Printer 
5-33 5.In the printer driver, select either Labels as the paper type or Tr a y 1 (MPT) as the paper 
tray.
6.If the printer is set to Panel Specified, the control panel asks for media type and size.
Printing Labels from Trays 2 and 3
1.Pull the tray out of the printer.
2.If necessary, open the paper guides:
■Squeeze the tab on the length guide, and then slide it back. The guide clicks into place.
■Slide the side guides outward....

Printing on Specialty Media
Phaser® 6180MFP Multifunction Printer 
5-34 3.Fan the label sheets to release sheets that are stuck together.
4.Insert the label sheets into the tray. Place the side to be printed faceup with the top of the 
page toward the front of the printer.
Note: Do not load the paper above the fill line indicated on the tray. Overloading the tray 
may cause jams. The following illustration indicates the maximum fill line for 
transparencies, labels, and glossy paper.
6180mfp-011...

Printing on Specialty Media
Phaser® 6180MFP Multifunction Printer 
5-35 5.If necessary, press the paper guides inward to fit the sheets.
Note: When the paper guides are adjusted correctly, there may be a small space between 
the labels and the guides.
6.Insert the tray into the tray slot, and push the tray completely into the printer.
7.On the control panel, select the paper type:
a.Press the System button.
b.Select 
Tray Settings, and then press the OK button.
c.Select 
Tr a y  2  or Tr a y  3, and then...

Printing on Specialty Media
Phaser® 6180MFP Multifunction Printer 
5-36
Printing Glossy Paper
Glossy paper can be printed from any tray. It can be printed on both sides.
To order paper, transparencies, or other specialty media, contact your local reseller or go to 
www.xerox.com/office/6180MFPsupplies
.
 
Guidelines
■Do not open sealed packages of glossy paper until you are ready to load them into the 
printer.
■Leave glossy paper in the original wrapper, and leave the packages in the shipping carton...

Printing on Specialty Media
Phaser® 6180MFP Multifunction Printer 
5-37 2.Fan the glossy paper to release sheets that are stuck together.
3.Insert the glossy paper into Tray 1 (MPT), and adjust the paper guides to fit the paper.
■Place the side to be printed facedown.
■Do not load more than 25 sheets.
4.In the printer driver, select either Glossy Paper as the paper type or Tr a y 1 (MPT) as the 
paper tray.
5.If the printer is set to Panel Specified, the control panel asks for media type and size....