Xerox Phaser 6115MFP User Manual

Moving the Product
Phaser® 6115MFP Multifunction Product
10-4
Moving the Product
Note:Remove Tray 2, if installed, before lifting the product.
■Always turn the product off and disconnect the power cord from the back of the product.
■Make sure two people are available to lift the product when moving it. 
■Keep the product level to avoid toner spillage.
■When lifting the product, grasp the areas as shown in the figure.
 
6115-042
32 kg
70.5 lbs
Downloaded From ManualsPrinter.com Manuals 

Moving the Product
Phaser® 6115MFP Multifunction Product
10-5
Cleaning the Exterior
Caution:Turn off the product and unplug the power cord before cleaning, and always use a 
soft, lint-free, dry cloth.
Control Panel Ventilation Grill
Exterior Filter
6115-043
6115-044
6115-0456115-046
Downloaded From ManualsPrinter.com Manuals 

Moving the Product
Phaser® 6115MFP Multifunction Product
10-6
Cleaning the Original Glass and Cover Pad
Original Glass Original Cover Pad
6115-0476115-095
Downloaded From ManualsPrinter.com Manuals 

Moving the Product
Phaser® 6115MFP Multifunction Product
10-7
Cleaning the Media Feed Roller and Laser Lens
1.Ensure the document feeder is closed, release the scanner lever, and then lift the scanner 
unit.
2.Remove any media and close the output bin. 
6115-021
6115-083
6115-103
6115-087
Downloaded From ManualsPrinter.com Manuals 

Moving the Product
Phaser® 6115MFP Multifunction Product
10-8 3.Pull the lever and open the top cover.
Caution:Do not touch the transfer belt.
4.Remove the imaging unit.
Caution:Place the imaging unit on a clean, level surface as shown below. The imaging 
unit cannot be exposed for more than 15 minutes. Cover the imaging unit with a light 
proof, dark bag to prevent exposure to direct light. 
6115-022
6115-041
6115-128
Downloaded From ManualsPrinter.com Manuals 

Moving the Product
Phaser® 6115MFP Multifunction Product
10-9 5.Clean the media feed roller and laser lens with a dry, lint-free cloth.
6.Place the imaging unit back in the product.
6115-0486115-049
6115-041
Downloaded From ManualsPrinter.com Manuals 

Moving the Product
Phaser® 6115MFP Multifunction Product
10-10 7.Close the top cover.
8.Close the scanner unit.
6115-024
6115-025
Downloaded From ManualsPrinter.com Manuals 

Moving the Product
Phaser® 6115MFP Multifunction Product
10-11
Cleaning the Duplex Feed Rollers
1.Open the duplex unit located on the back of the product.
2.Using a dry, lint-free cloth, clean the duplex feed rollers.
3.Close the duplex unit.
6115-050
6115-051
6115-052
Downloaded From ManualsPrinter.com Manuals 

Moving the Product
Phaser® 6115MFP Multifunction Product
10-12
Cleaning the Tray 2 Feed Rollers
1.Turn the product off and disconnect the power cord from the back of the product.
2.Using two people, carefully lift the product off Tray 2.
6115-063
6115-053
Downloaded From ManualsPrinter.com Manuals 

Moving the Product
Phaser® 6115MFP Multifunction Product
10-13 3.Clean the rollers in the tray with a dry, lint-free cloth.
4.Using two people, carefully set the product back on top of Tray 2.
6115-054
6115-071
Downloaded From ManualsPrinter.com Manuals