Xerox Phaser 6115MFP User Manual

Options
Phaser® 6115MFP Multifunction Product
6-27 5.Reattach the lid to Tray 2.
6.Reinsert Tray 2 into the printer.
6115-033
6115-034
Downloaded From ManualsPrinter.com Manuals 

Options
Phaser® 6115MFP Multifunction Product
6-28
2-Sided Printing (Duplexing)
2-sided printing can be done manually or can be done automatically with the optional duplex 
unit installed and enabled in the printer driver.
Note:Only plain paper, 60 to 90 g/m
2 (16 to 24 lb. bond) can be auto duplexed. See 
Supported Paper and Media on page 6-2. Duplexing envelopes, labels, transparencies, or 
glossy is not supported.
Ensure the duplex unit is installed and enabled by the printer driver to successfully...

Phaser® 6115MFP Multifunction Product
7-1 This chapter includes:
■Basic Copying on page 7-2
■Adjusting Copy Options on page 7-3
■Advanced Copying on page 7-8
Copying
Downloaded From ManualsPrinter.com Manuals 

Basic Copying
Phaser® 6115MFP Multifunction Product
7-2
Basic Copying
User either the Automatic Document Feeder (ADF) or the document glass to make copies. 
Load the originals to be copied and follow the steps below to make copies.
For information on copy settings, see Adjusting Copy Options on page 7-3.
Loading Originals
1.On the control panel, press the Copy button.
2.Specify the copy settings, see Adjusting Copy Options on page 7-3.
3.Specify the number of copies using the control panel keypad. The...

Adjusting Copy Options
Phaser® 6115MFP Multifunction Product
7-3
Adjusting Copy Options
This section includes:
■Setting the Original Document Type on page 7-3
■Setting the Copy Quality on page 7-4
■Setting the Copy Density on page 7-4
■Collating Copies on page 7-5
■Selecting Paper Priority on page 7-6
■Specifying a Zoom Ratio on page 7-7
If you are connected to your product via USB, you can change copy settings through the MFP 
ControlCentre (MCC). For instructions on using the MFP ControlCentre, see the...

Adjusting Copy Options
Phaser® 6115MFP Multifunction Product
7-4
Setting the Copy Quality
Copies can be printed in either standard (600 x 300) or enhanced (600 x 600) mode. 
To set the copy quality:
Using the MFP ControlCentre
1.Open the MCC, connect to your product and download the current .dat file.
2.Click the Menu button.
3.Select the Copy Settings tab.
4.From the Quality list, select Standard or Enhanced.
5.Select OK to save the new settings.
6.Upload the new settings to the product.
Using the...

Adjusting Copy Options
Phaser® 6115MFP Multifunction Product
7-5
Collating Copies
You can choose to have your original copies collated. Use this option when you want to print 
two or more separate sets of a copy job that contains two or more pages. For example, five 
collated copies of a three-page job will result in one set of all three pages in order, then the 
second set of all three pages, and so on.
Copies set to collate are stored in product memory once and then printed. 
Note:Collating copies uses...

Adjusting Copy Options
Phaser® 6115MFP Multifunction Product
7-6
Selecting Paper Priority
Note:If Tray 2 is not installed, Tray 1 Select will not appear on the control panel.
Using the MFP ControlCentre
1.Open the MCC, connect to your product and download the current .dat file.
2.Click the Menu button.
3.Select the Copy Settings tab.
4.Select the default tray from the Paper Priority drop-down list.
5.Select OK to save the new settings.
6.Upload the new settings to the product.
Using the Control Panel...

Adjusting Copy Options
Phaser® 6115MFP Multifunction Product
7-7
Specifying a Zoom Ratio
The zoom ratio can be specified either by selecting a preset zoom ratio or by specifying a 
custom zoom ratio.
Note:Depending on the selected preset zoom ration, a sample of the change to the media size 
may appear in the status area of the control panel. The sample of the media size change will 
disappear after 5 seconds.
Specifying a Preset Zoom Ratio
1.On the control panel, press the Reduce/Enlarge button until...

Advanced Copying
Phaser® 6115MFP Multifunction Product
7-8
Advanced Copying
This section includes:
■Setting 2in1 Copying on page 7-8
■ID Card Copying on page 7-9
■Printing 2-Sided Copies on page 7-10
Setting 2in1 Copying
With 2in1 copying, two separate document pages can be copied together onto a single page.
Note:The original documents must be placed in the automatic document feeder for 2in1 
copying. 2in1 copying cannot be performed using the document glass.
1.On the control panel, press the 2in1...