Xerox Phaser 6115MFP User Manual

Using the Macintosh Printer Driver
Phaser® 6115MFP Multifunction Product
5-12
Using the Macintosh Printer Driver
This section includes:
■Selecting Print Options on page 5-12
■Specifying Page Setup Settings on page 5-12
■Custom Paper Size Options on page 5-12
■Specifying Print Settings on page 5-13
Selecting Print Options
1.Open Printer Setup Utility, which can be accessed by selecting Macintosh HD, 
Applications, and then Utilities.
2.Select this printer in the Printer List, and then select Show Info...

Specifying Print Settings
Phaser® 6115MFP Multifunction Product
5-13
Specifying Print Settings
The following dialog box appears when Print... is selected from the File menu in the 
application being used.
1.Select Print... from the File menu, the Print dialog box appears.
2.Select your printer in the Printer pop-up menu. The Print dialog box is used to specify 
the following print options.
Print Dialog Description
Copies and Pages
The Copies and Pages section is used to specify the number of copies to...

Specifying Print Settings
Phaser® 6115MFP Multifunction Product
5-14
Layout
The Layout section is used to specify the page layout when printing and the setting for two-
sided printing.
1.Pages per Sheet: Specifies the number of pages to be printed on one sheet of paper. For 
example, if 2 is selected, two pages are printed on one sheet of paper.
2.Layout Direction: If you are printing more than one page per sheet, this specifies the 
direction and order the pages should be arranged on each sheet of...

Specifying Print Settings
Phaser® 6115MFP Multifunction Product
5-15
Paper Handling
The Paper Handling section is used to specify the pages that are to be printed and the order in 
which the pages are printed.
1.Page Order: Select the order in which you want the document to print.
2.Print:
■All pages: Select this option to print all pages.
■Odd numbered pages: Select this option to print only the pages with odd page 
numbers.
■Even numbered pages: Select this option to print only the pages with even page...

Phaser® 6115MFP Multifunction Product
6-1 This chapter includes:
■Supported Paper and Media on page 6-2
■Output Bin on page 6-3
■Loading Media on page 6-5
■Guaranteed Imageable (Printable) Area on page 6-24
■Options on page 6-25
Printing Basics
Downloaded From ManualsPrinter.com Manuals 

Supported Paper and Media
Phaser® 6115MFP Multifunction Product
6-2
Supported Paper and Media 
Before purchasing a large quantity of special media, do a trial print with the media and check 
the print quality.
For information about recommended paper and specialty media, go to Recommended Media 
List (United States) or Recommended Media List (Europe).
To order paper, transparencies, or other specialty media, contact your local reseller or go to 
www.xerox.com/office/supplies
.
The following table provides...

Output Bin
Phaser® 6115MFP Multifunction Product
6-3
Output Bin
All printed media is output to the facedown, output bin. The output bin maximum capacity is 
100 sheets (A4/Letter) of 80 g/m
2 (22 lb.) media.
The output bin can be adjusted to two angles as shown in the following illustration.
Adjusting the Output Bin
1.The output bin extension can be pulled out to two different positions. Use the appropriate 
position depending on the size of the media being printed.
6115-085
6115-088
Downloaded From...

Output Bin
Phaser® 6115MFP Multifunction Product
6-4 2.Press and hold the button on the right side of the output bin to lower it into the horizontal 
position.
Note:When printing on postcards, ensure the output bin is fully horizontal.
6115-087
6115-086
Downloaded From ManualsPrinter.com Manuals 

Loading Media
Phaser® 6115MFP Multifunction Product
6-5
Loading Media
This section includes:
■Loading Plain Paper on page 6-6
■Card Stock on page 6-10
■Thick Card Stock on page 6-10
■Loading Envelopes on page 6-11
■Labels on page 6-18
■Letterhead on page 6-19
■Transparency on page 6-20
■Glossy Stock on page 6-21
■Loading Specialty Media on page 6-21
Holding a stack of approximately 200 sheets at a time, fan the stack to prevent static buildup 
before inserting it in a tray.
Note:Do not fan...

Loading Media
Phaser® 6115MFP Multifunction Product
6-6
Loading Plain Paper
Use plain paper that is: 
■Kept on a flat, level surface in its original wrapper until it is time to load it.
■Suitable of laser printers, such as standard or recycled office paper.
■Keep media between 35% and 85% relative humidity.
Do not use media that is:
■Coated with a processed surface (such as carbon paper, digitally gloss-coated media, 
and colored paper that has been treated.
■Carbon backed
■Iron-on transfer media (such...