Xerox Phaser 6115MFP User Manual

Configuring the Product
Phaser® 6115MFP Multifunction Product
3-14
Paper Source Setup Menu
Setting the control panel’s paper source setup tells the product what type of paper is loaded in 
the trays. The media settings in the printer driver will override the control panel settings.
Setting the Tray 1/Tray 2 Paper Source
1.From the main screen, scroll to the Paper Source menu using the Up Arrow or 
Down Arrow button, and then press the Menu/Select button.
2.Select 
Tray1 Paper or Tray 2 Paper, and then...

Phaser® 6115MFP Multifunction Product
4-1 This chapter includes:
■Networking Protocols on page 4-2
■Network Connection Overview on page 4-4
■Automatically Setting the Product’s IP Address on page 4-7
■Manually Setting the Product’s IP Address on page 4-8
This chapter provides a general overview on networking and network protocols available to 
your product. 
See also: 
Features Setup Guide at www.xerox.com/office/6115support
Network Basics
Downloaded From ManualsPrinter.com Manuals 

Networking Protocols
Phaser® 6115MFP Multifunction Product
4-2
Networking Protocols
The Phaser 6115MFP supports the following network protocols:
■BOOTP/DHCP
■HTTP
■IPP
■LPD/LPR
■SLP
■SNMP
■Port 9100
■SMTP
BOOTP
BOOTP (Bootstrap Protocol) is an Internet protocol that enables a diskless workstation to 
discover (1) its own IP address, (2) the IP address of a BOOTP server on the network, and (3) 
a file that can be loaded into memory to boot the workstation. This enables the workstation to 
boot without...

Networking Protocols
Phaser® 6115MFP Multifunction Product
4-3
LPD/LPR
LPD/LPR (Line Printer Daemon/Line Printer Request) is a platform-independent printing 
protocol that runs over TCP/IP. Originally implemented for BSD UNIX, its use has spread into 
the desktop world and is now an industry standard. 
SLP
Traditionally, in order to locate services on the network, users had to supply the host name or 
network address of the machine providing the desired service. This has created many 
administrative...

Networking Protocols
Phaser® 6115MFP Multifunction Product
4-4
Network Connection Overview
Depending on your particular setup, the following hardware and cabling is required for 
Ethernet.
■If you are connecting to one computer, an Ethernet RJ-45 crossover cable is required. 
■If you are connecting to one or more computers with a hub, an Ethernet hub and two 
twisted-pair (category 5/RJ-45) cables are required. 
■If you are connecting to one or more computers using a cable or DSL router, a cable or 
DSL...

Networking Protocols
Phaser® 6115MFP Multifunction Product
4-5
Installing Over a Network Connection
1.Turn on the product and the computer.
2.Connect the product to the network using the recommended hardware and cables.
3.Configure the product’s network address, which is required to identify the product on the 
network. 
■Windows operating products: Run the installer on the Software and Documentation 
CD-ROM to automatically set the product’s IP address if the product is connected to 
an established...

Methods of Setting the Product’s IP Address
Phaser® 6115MFP Multifunction Product
4-6
Methods of Setting the Product’s IP Address
This section includes:
■Automatically Setting the Product’s IP Address on page 4-7
■Manually Setting the Product’s IP Address on page 4-8
Set the product’s IP address using any of the following methods. DHCP is enabled by default 
on all Phaser printers.
■MFP ControlCentre
■CentreWare IS
■Dynamic (Auto IP)
Information Required for Manual IP Addressing
Information Comments...

Methods of Setting the Product’s IP Address
Phaser® 6115MFP Multifunction Product
4-7
Automatically Setting the Product’s IP Address
If the product is connected to a small established TCP/IP network without a DHCP server, use 
the installer on the Software and Documentation CD-ROM to detect or assign an IP address to 
your product. 
Note:For the automatic Installer to function, the product must be connected to an established 
TCP/IP network.
You can turn on/off both protocols using the control panel, or...

Methods of Setting the Product’s IP Address
Phaser® 6115MFP Multifunction Product
4-8
Manually Setting the Product’s IP Address
Note:Verify that your computer has a properly configured IP address for your network. 
Contact your network administrator for more information. DNS must be disabled to manually 
set the IP address.
If you are on a network without a DNS server, or in an environment where the network 
administrator assigns product IP addresses, you can use this method to manually set the IP...

Phaser® 6115MFP Multifunction Product
5-1 This chapter includes:
■Accessing the Printer Driver Settings on page 5-2
■Using the Windows Printer Driver on page 5-4
See also: (English only)
Using the Windows Printer Driver tutorial at www.xerox.com/office/6115support
Using Printer Driver 
Options
Downloaded From ManualsPrinter.com Manuals