Xerox Phaser 6115MFP User Manual

Fax Regulations
Phaser® 6115MFP Multifunction Product
1-13 The Ringer Equivalence Number (REN) is used to determine the number of devices that may 
be connected to a telephone line. Excessive RENs on a telephone line may result in the devices 
not ringing in response to an incoming call. In most but not all areas, the sum of RENs should 
not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as 
determined by the total RENs, contact the local Telephone Company. For...

Fax Regulations
Phaser® 6115MFP Multifunction Product
1-14
Canada
Note:The Industry Canada label identifies certified equipment. This certification means that 
the equipment meets certain telecommunications network protective, operational and safety 
requirements as prescribed in the appropriate Terminal Equipment Technical Requirements 
document(s). The Department does not guarantee the equipment will operate to the user’s 
satisfaction. 
Before installing this equipment, users must make sure that it is...

Fax Regulations
Phaser® 6115MFP Multifunction Product
1-15
Europe
Radio Equipment & Telecommunications Terminal Equipment Directive 
The Facsimile has been approved in accordance with the Council Decision 1999/5/EC for pan-
European single terminal connection to the public switched telephone network (PSTN). 
However, due to differences between the individual PSTNs provided in different countries, the 
approval does not, of itself, give an unconditional assurance of successful operation on every 
PSTN...

Fax Regulations
Phaser® 6115MFP Multifunction Product
1-16
New Zealand Telecom Warning Notice
1.The grant of a Telepermit for any item of terminal equipment indicates only that Telecom 
has accepted that the item complies with minimum conditions for connection to its 
network. It indicates no endorsement of the product by Telecom, nor does it provide any 
sort of warranty. Above all, it provides no assurance that any item will work correctly in 
all respects with another item of Telepermitted equipment...

Product Specifications
Phaser® 6115MFP Multifunction Product
1-17
Product Specifications
Physical Specifications
Base Unit
■Width: 528 mm (20.8 in.)
■Depth: 475 mm (18.7 in.)
■Height: 531 mm (20.9 in.)
■Weight: 33 kg (72.8 lb.)
Optional Tray 2
Height: 117 mm (4.61 in.)
Clearance Requirements
Environmental Specifications
Temperature
■Storage: -20o to 40o C / -4o to 104o F
■Operating: 10o to 32o C / 50o to 90o F
Relative Humidity
■Storage: 15% to 80% (non-condensing)
■Operating: 15% to 80%...

Product Specifications
Phaser® 6115MFP Multifunction Product
1-18
Electrical Specifications
■110-127 VAC, 50-60 Hz 
■110-120 VAC, 50-60 Hz (US/Canada Only)
■220-240 VAC, 50-60 Hz
■ENERGY STAR qualified product. Default time to Energy Save: 30 minutes.
Performance Specifications
Resolution
Maximum Resolution: 2400 x 600 dpi
Print Speed
■Color: 5 ppm (duplex: 5 ppm)
■Monochrome: 20 ppm (duplex: 11 ppm)
Copy Speed
■Color: 5 cpm (600 x 300 dpi)
■Black and White: 12 cpm (600 x 300 dpi)
Controller...

Material Safety Data Sheet
Phaser® 6115MFP Multifunction Product
1-19
Material Safety Data Sheet
For Material Safety Data information regarding your Phaser 6115MFP product, go to:
■United States and Canada: www.xerox.com/msds
■European Union: www.xerox.com/environment_europe
For the Customer Support Center phone numbers, go to www.xerox.com/office/contacts. 
Downloaded From ManualsPrinter.com Manuals 

Product Recycling and Disposal
Phaser® 6115MFP Multifunction Product
1-20
Product Recycling and Disposal
All Countries
If you are managing the disposal of your Xerox product, please note that the product may 
contain, lead, mercury, perchlorate, and other materials whose disposal may be regulated due 
to environmental considerations. The presence of lead, mercury, and perchlorate is fully 
consistent with regulations applicable at the time that the product was placed on the market. 
For disposal...

Product Recycling and Disposal
Phaser® 6115MFP Multifunction Product
1-21
Professional/Business Environment
In accordance with European legislation, end of life electrical and electronic equipment 
subject to disposal must be managed within agreed procedures.
Prior to disposal, please contact your local reseller or Xerox representative for end of life 
takeback information.
North America
Xerox operates an equipment takeback and reuse/recycle program. Contact your Xerox sales 
representative...

Phaser® 6115MFP Multifunction Product
2-1 This chapter includes:
■Product Tour on page 2-2
■Product Configurations on page 2-4
■Print and Scan Drivers on page 2-6
■Control Panel on page 2-7
■More Information on page 2-18
Product Features
Downloaded From ManualsPrinter.com Manuals