Xerox Phaser 6115MFP User Manual

MFP ControlCentre (Windows Only with USB Connection)
Phaser® 6115MFP Multifunction Product
3-4
MFP ControlCentre (Windows Only with USB 
Connection)
The MFP ControlCentre (MCC) provides an easy to use Graphical User Interface (GUI) that 
simplifies configuring your product and managing your fax directory lists from your computer 
over USB. 
The MCC stores configuration and setting in a .dat file that is uploaded from your computer to 
your Phaser 6115MFP. It is possible to also save the .dat file to a...

Configuring the Product
Phaser® 6115MFP Multifunction Product
3-5
Configuring the Product
This section includes:
■User Setup on page 3-5
■Setting the Auto Panel Reset on page 3-6
■Changing the Energy Save Mode on page 3-7
■Setting the LCD Contrast on page 3-7
■Setting the Control Panel Language on page 3-8
■Setting the Scanner Lamp Off Time on page 3-9
■Setting the Speaker Volume on page 3-9
■Setting the Control Panel Default Mode on page 3-10
■Setting the Toner Out Action on page 3-11
■Setting the Media...

Configuring the Product
Phaser® 6115MFP Multifunction Product
3-6
Setting the Auto Panel Reset
Auto panel reset returns the control panel to its default settings after the product has been idle 
for the specified a specified amount of time. 
Using the Control Panel
1.From the main screen, press the Menu/Select button to enter the Machine Setup menu.
2.Scroll to the 
Auto Panel Reset menu, or press number 1 on the alphanumeric keypad, and 
then press the Menu/Select button.
3.Use the Right Arrow or Left...

Configuring the Product
Phaser® 6115MFP Multifunction Product
3-7
Changing the Energy Save Mode
Using the Control Panel
1.From the main screen, press the Menu/Select button to enter the Machine Setup menu.
2.Scroll to the 
Energy Save Mode menu, or press number 2 on the alphanumeric keypad, 
and then press the Menu/Select button.
3.Use the Right Arrow or Left Arrow button to select 
5, 15, 30, or 60 minutes for the 
product to be idle before entering Energy Save mode, and then press the Menu/Select...

Configuring the Product
Phaser® 6115MFP Multifunction Product
3-8
Setting the Control Panel Language
Using the Control Panel
1.From the main screen, press the Menu/Select button to enter the Machine Setup menu.
2.Scroll to the 
Control Panel Language menu, or press number 5 on the alphanumeric 
keypad, and then press the Menu/Select button.
3.Scroll to the correct control panel language for your product using the Up Arrow or 
Down Arrow button.
4.Press the Menu/Select button to save the settings.
Using...

Configuring the Product
Phaser® 6115MFP Multifunction Product
3-9
Setting the Scanner Lamp Off Time
Select the length of time the product is idle before the scanner unit lamp is turned off.
1.From the main screen, press the Menu/Select button to enter the 
Machine Setup menu.
2.Scroll to the 
Lamp Off Time menu, or press number 6 on the alphanumeric keypad, and 
then press the Menu/Select button.
3.Select from the following options by using the Left Arrow or Right Arrow button.
■HRS: The lamp turns off...

Configuring the Product
Phaser® 6115MFP Multifunction Product
3-10
Setting the Control Panel Default Mode
Setting the default start mode tells the product to enter either Fax or Copy mode when turned 
on or when the settings on the control panel return to their defaults. 
Using the Control Panel
1.From the main screen, press the Menu/Select button to enter the Machine Setup menu.
2.Scroll to the 
Default Mode menu, or press number 8 on the alphanumeric keypad, and 
then press the Menu/Select button....

Configuring the Product
Phaser® 6115MFP Multifunction Product
3-11
Setting the Toner Out Action
Setting the toner out action tells the product to continue printing or faxing when the toner 
cartridge runs out.
Using the Control Panel
1.From the main screen, press the Menu/Select button to enter the Machine Setup menu.
2.Scroll to the 
Toner Out Action menu, or press number 8 on the alphanumeric keypad, and 
then press the Menu/Select button.
3.Select from the following options by using the Up Arrow or...

Configuring the Product
Phaser® 6115MFP Multifunction Product
3-12
Setting the Media Mismatch Behavior
If you select a media type in the printer driver that is different than the paper source set on the 
products control panel, you can choose whether or not the product continues to print job.
Using the Control Panel
1.From the main screen, press the Menu/Select button to enter the Machine Setup menu.
2.Scroll to the 
Auto Continue menu, or press number 10 on the alphanumeric keypad, and 
then press the...

Configuring the Product
Phaser® 6115MFP Multifunction Product
3-13
Calibrating the Product
Using the Control Panel
1.From the main screen, press the Menu/Select button to enter the Machine Setup menu.
2.Scroll to the 
Calibration menu, or press number 11 on the alphanumeric keypad, and then 
press the Menu/Select button.
3.Select from the following options by using the Right Arrow or Left Arrow button.
■ON: Stabilizes the image.
■OFF: Does not stabilize the image.
4.Press the Menu/Select button to save...