Xerox 8700x Manual

Maintenance 
  ColorQube 8700/8900 Color Multifunction Printer  161 
  User Guide 
 
Cleaning the Printer  
This section includes: 
•   Cleaning the Printer Exterior  ...................................................................................................................................... 161  
•   Cleaning the Document Glass and Document Cover  ................................ ....................................................... 162 
•   Cleaning the Paper Release Blade...

Maintenance 
162  ColorQube 8700/8900  Color Multifunction Printer  
  User Guide  
 
Cleaning the Document Glass and Document Cover  
To ensure optimum scan and copy quality, clean the document glass regularly. Cleaning helps avoid 
output with streaks, smears, and other marks that transfer from the glass while scanning documents.  
To clean the d ocument glass and document cover:  
1.   Use a lint -free cloth lightly dampened with Xerox
® Lens/mirror Cleaner or another suitable 
non -abrasive glass...

Maintenance 
  ColorQube 8700/8900 Color Multifunction Printer  163 
  User Guide 
 
Cleaning the Paper Release Blade  
Cleaning the paper release blade removes ink residue, which can cause streaks, smears, and other marks 
on the printed page.  
To clean the paper release blade:  
1.   Open the top left side door.  
 
2.   Lift the exit guide handle and hold it up while completing the next step.  
 
3.   To rotate the paper guide to its raised position, lift the green handle.  
 
4.   Release the exit...

Maintenance 
164  ColorQube 8700/8900  Color Multifunction Printer  
  User Guide  
 
5.   Locate the clear plastic strip on the paper guide. Wipe the entire length of the lower half, especially 
the side facing you, with a cloth pre -moistened in 90% isopropyl alcohol.  
 
6.   Lower the paper guide to its original position.  
 
7.   Close the door.  
  

Maintenance 
  ColorQube 8700/8900 Color Multifunction Printer  165 
  User Guide 
 
Cleaning Tray 1 Rollers  
Periodically inspect the feed rollers in each of the installed trays, and clean them if paper dus t or other 
residue is visible. Dirt on the feed rollers can cause paper jams or deteriorate print quality.  
To clean Tray 1 rollers:  
1.   Open tray 1.  
 
2.   Clean the gray pick roller using a clean, soft cloth.  
 
3.   Close the tray.  
  

Maintenance 
166  ColorQube 8700/8900  Color Multifunction Printer  
  User Guide  
 
Cleaning Trays 2 –5 Rollers  
Periodically inspect the feed rollers in each of the installed trays, and clean them if paper dust or other 
residue is visible. Dirt on the feed rollers can cause paper jams or deteriorate print quality.  
To clean Trays 2 –5 rollers: 
1.   Open t he paper tray, lift the front of the paper tray, and pull it completely out of the printer.  
 
Note: Do not remove the high -capacity feeder...

Maintenance 
  ColorQube 8700/8900 Color Multifunction Printer  167 
  User Guide 
 
c.   Inside the printer, locate the orange release lever to the left of the gray pick roller assembly.  
 
d.   Raise the release lever, which allows the roller assembly to swing down.  
 
Note: Remember the position of the roller assembly for reinstallation.  
 
 
e.   Grasp and pull the pick roller assembly straight down to remove it from the printer.  
  

Maintenance 
168  ColorQube 8700/8900  Color Multifunction Printer  
  User Guide  
 
3.   To clean the pick roller, lay a strip of clear packing tape on a table, sticky side up. Run the pick roller 
assembly along the length of the tape.  
 
Note: Do not use masking tape or duct tape because they can leave residue on the roller.  
 
 
4.   Reinstall the pick roller assembly.  
a.   Hold the pick roller assembly vertically so that it aligns with the spaces into which it fits.  
b.   Gent ly snap the...

Maintenance 
  ColorQube 8700/8900 Color Multifunction Printer  169 
  User Guide 
 
6.   Close the door.  
 
7.   Reinstall Tray 2.  
 
8.   Repeat this procedure for any i nstalled optional paper trays.  

Maintenance 
170  ColorQube 8700/8900  Color Multifunction Printer  
  User Guide  
 
Cleaning the Exit Rollers  
Ink on the exit rollers can leave marks on pages. When roller marks are visible on prints, clean the exit 
rollers. 
To clean the exit rollers:  
1.   Clean one roller at a time by holding a soft, clean cloth  against its gray surface.  
 
2.   Open and close the top left side door so that the exit roller turns against the cloth.  
 
3.   Repeat this procedure for the remaining three exit...