Xerox 1632 2240 3535 Color Carrera Manual

6/02
2-221 DC1632/2240
12-262
Status Indicator RAPs Prelaunch Training/Review
12-262 Eject Clamp Home Sensor OffThe Eject Clamp Home Sensor does not turn off within 200ms after the Eject Clamp DOWN
has started.ProcedureRemove the Eject Clamp Home Sensor bracket. (Leave the Connector plugged in)
Enter dC330 [012-210] and press Start.  Actuate the Eject Clamp Home Sensor with a sheet of
paper. The display changes.
YN
Check the Eject Clamp Home Sensor using the Generic Transmissive Sensor RAP.
Restore the...

6/02
2-222DC1632/2240
12-262
Prelaunch Training/Review Status Indicator RAPsFigure 4 Finisher PWB 

6/02
2-223 DC1632/2240
12-267
Status Indicator RAPs Prelaunch Training/Review
12-267 DecurlerThe Decurler Cam Home Sensor did not actuate after the Decurler Cam Clutch energized.ProcedureOpen H Transport Cover and cheat the H Transport Cover Interlock Sensor (Figure 1). The H
Transport Belts rotate.
YN
Go to the 12-100 RAP.
Enter dC330 [012-217] and press Start. Rotate the Actuator and turn the Decurler Cam Home
Sensor on/off. The display changes.
YN
Check the Decurler Cam Home Sensor using the Generic...

6/02
2-224DC1632/2240
12-267
Prelaunch Training/Review Status Indicator RAPsFigure 5 Finisher PWB 

6/02
2-225 DC1632/2240
12-281
Status Indicator RAPs Prelaunch Training/Review
12-281 Set ClampThe Set Clamp Home Sensor does not turn on within 200ms after the Set Clamp has started
operation.ProcedureEnter dC330 [012-211] and press Start.  Rotate the Actuator and turn the Set Clamp Home
Sensor on/off. The display changes.
YN
Check the Set Clamp Home Sensor using the Generic Transmissive Sensor RAP.
Enter dC330 [012-040] and press Start. The Set Clamp Solenoid energized.
YN
Check the Set Clamp Solenoid...

6/02
2-226DC1632/2240
12-281
Prelaunch Training/Review Status Indicator RAPsFigure 4 Finisher PWB 

6/02
2-227 DC1632/2240
12-301
Status Indicator RAPs Prelaunch Training/Review
12-301  Top Cover InterlockThe Top Cover Interlock is open.ProcedureCheat the Top Cover Interlock Switch. 12-301 is cleared.
YN
+5 VDC is measured between the Finisher PWB p/j (+) and Finisher PWB Chassis (-
).
YN
Replace the Finisher PWB (PL 17.13).
+5 VDC is measured between the Top Cover Interlock Switch p/j (+) and Finisher
PWB Chassis (-).
YN
Check the wire between the Top Cover Interlock Switch p/j and the Finisher PWB...

6/02
2-228DC1632/2240
12-302
Prelaunch Training/Review Status Indicator RAPs
12-302 Front Door Interlock OpenThe Front Door Interlock is open.ProcedureCheat the Front Door Interlock Switch. Has the display of 012-302 been cleared.
YN
+5 VDC is measured between the Finisher PWB p/j (+) and Finisher PWB Chassis (-
).
YN
Replace the Finisher PWB (PL 17.13).
+5 VDC is measured between the Front Door Interlock Switch p/j (+) and Finisher
PWB Chassis (-).
YN
Check the wire between the Front Door Interlock...

6/02
2-229 DC1632/2240
12-303
Status Indicator RAPs Prelaunch Training/Review
12-303 H Transport Interlock OpenThe H Transport Interlock Sensor detected open.ProcedureBlock the H Transport Interlock Sensor with a sheet of paper. Has the display of 012-303
been cleared.
YN
+5 VDC is measured between the Finisher PWB p/j (+) and Finisher PWB Chassis (-
).
YN
Replace the Finisher PWB (PL 17.13).
+5 VDC is measured between the H Transport Interlock Sensor p/j (+) and Finisher
PWB Chassis (-).
YN
Check the...

6/02
2-230DC1632/2240
12-305
Prelaunch Training/Review Status Indicator RAPs
12-305 Docking Interlock OpenThe Docking Interlock is open.ProcedureBlock the Docking Interlock Sensor with a sheet of paper. Has the display of 012-305 been
cleared.
YN
+5 VDC is measured between the Finisher PWB p/j (+) and Finisher PWB Chassis (-
).
YN
Replace the Finisher PWB (PL 17.13).
+5 VDC is measured between the Docking Interlock Sensor p/j (+) and Finisher
PWB Chassis (-).
YN
Check the wire between the Docking...