Xerox 1632 2240 3535 Color Carrera Manual

6/02
2-261 DC1632/2240
16-450
Status Indicator RAPs Prelaunch Training/Review
16-318  Optional Page MemoryOptional page memory error.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Replace optional Page Memory of the Scanner.
16-450  SMB Host NamePC of the same host name is duplicated on a network.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Change the host name. 

6/02
2-262DC1632/2240
16-452, 16-453
Prelaunch Training/Review Status Indicator RAPs
16-452  IP Address DuplicatedPC of the same IP address exists on a network.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Change the IP address.
16-453  IP Address AcquisitionThe IP address failed to be granted from the DHCP server.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Set the IP address. 

6/02
2-263 DC1632/2240
16-454, 16-460Status Indicator RAPs Prelaunch Training/Review
16-454  Dynamic DNS Update Dynamic DNS update failed.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Again, switch power off then on
16-460  Full Status DetectedFull Status Detected at HD Access.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Again, switch power off then on 

6/02
2-264DC1632/2240
16-590, 16-591
Prelaunch Training/Review Status Indicator RAPs
16-590  Read Error (Partition A)A verify error occurred in the HD partition A at PC-Diag operation from PWS.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Set up the HD partition A and perform the verify test again.
16-591  Read Error (Partition B)A verify error occurred in the HD partition B at PC-Diag operation from PWS.ProcedureSwitch power off then on. The problem...

6/02
2-265 DC1632/2240
16-592, 16-593Status Indicator RAPs Prelaunch Training/Review
16-592  Read Error (Partition C)A verify error occurred in the HD partition C at PC-Diag operation from PWS.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Set up the HD partition C and perform the verify test again.
16-593  Read Error (Partition D)A verify error occurred in the HD partition D at PC-Diag operation from PWS.ProcedureSwitch power off then on. The problem...

6/02
2-266DC1632/2240
16-594, 16-595
Prelaunch Training/Review Status Indicator RAPs
16-594  Read Error (Partition E)A verify error occurred in the HD partition E at PC-Diag operation from PWS.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Set up the HD partition E and perform the verify test again.
16-595  Read Error (Partition H)A verify error occurred in the HD partition H at PC-Diag operation from PWS.ProcedureSwitch power off then on. The problem...

6/02
2-267 DC1632/2240
16-701, 16-702Status Indicator RAPs Prelaunch Training/Review
16-701  PLW MemoryAn insufficient memory is detected while using the ART EX.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Decrease the resolution.
NOTE: Decreasing the resolution may have affect of reducing the PLW memory.
16-702  PLW MemorySystem detected insufficient buffer for the print page that cannot be compressed.ProcedureSwitch power off then on. The problem...

6/02
2-268DC1632/2240
16-703, 16-704
Prelaunch Training/Review Status Indicator RAPs
16-703  Email To Invalid BoxSystem detected an unopened or invalid Mailbox and aborted a job when receiving an Email.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Open the appropriate Mailbox.
Send an Email to a valid Mailbox.
16-704  Security BoxThe system detected that a Mailbox was full (it exceeded the maximum number of documents
per Box) and aborted a job.  Full...

6/02
2-269 DC1632/2240
16-705, 16-706Status Indicator RAPs Prelaunch Training/Review
16-705  Security Storage without HDRegistry for Secure Print has failed because Security Storage cannot be done due to no HD
available.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Check whether the HD is installed.
If the problem has occurred at installation, check whether the operations for Secure Print are
correct.
16-706  Maximum User NumberThe system detected that a...

6/02
2-270DC1632/2240
16-709, 16-716
Prelaunch Training/Review Status Indicator RAPs
16-709  PLW CommandAn ART EX Command error has occurred during PLW processing.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Cancel the job and execute the command again.
16-716  Spool TIFF DataUnable to  spool TIFF files  because disk capacity is exceeded.ProcedureSwitch power off then on. The problem continues.
YN
Return to service call procedures.
Install the HD or...