Vodavi Starplus Hybrid Key Telephone System Installation Manual

STARPLUS@ SPD 1428 & 2858 
Digital Key Telephone Systems 
SECTION 650 
-  EXCEPTION TABLES PROGRAMMING 
650.1 INTRODUCTION 
Programming Steps 
The Starplus Digital (SPD) Key Telephone System 
offers a flexible means of applying toll restriction to 
stations or individuals. Dialing privileges (or toll re- 
striction) is determined through assignment of sta- 
tion and CO line Class Of Service (COS). Several 
types of restriction can be derived simply by pro- 
gramming COS assignments and CO line access to...

Digital Key Telephone Systems sTARPLUS@ SPD 1428 & 2856 
, 
Table 650-2 Allow/Deny Toll Table 
NO 
ENTRIES ALLOW 
FOUND ( A 
El FOUND D- 
with a 1 followed by a seven digit local number), but 
would deny long distance calls (numbers dialed with 
a 1 followed by an area code). 
The Starplus Digital (SPD) Key Telephone System 
also offers four (4) special tables that can be refer- 
enced from within the two allow tables. Three of the 
special tables can be assigned to specific area codes 
that require...

*AFtPLUS@ SPD 1428 & 2858 
Digital Key Telephone Systems 
ing toll restriction by taking advantage of the time it 
takes for a central office line to provide dial tone. 
Because of this it is recommended that LCR be 
considered when toll restriction is desired. 
Issue 1, November 1991 650-3  

Digital Key Telephone Systems sTARPLUS@ SPD 1428 & 2868 
850.3 TOLL RESTRICTION PROGRAMMING 
A. Entering Toll Table Programming 
Programming Steps 
If the system is in the programming mode, continue 
using the program codes. If starting to program here, 
enter the programming mode. (Refer to Sec. 600.2). 
NOTE: It is recommended that the Exception Tables 
be initializedprior to entering data into the tables. Do 
this by following the instructions in Sec. 600.5 for 
initializing the Exception Tables...

STARPLUS@ SPD 1428 & 2858 Digital Key Telephone Systems 
Exception Tables Programming (Cont’d) 
B. 
1. Allow Table Programming 
Programming Steps 
Press the ALLOW TABLE A or ALLOW TABLE 
B flexible button (Button #l or #3). The following 
display will be shown on the display telephone: 
The first two bins locations are displayed. 
2. Enter the two-digit bin number (01-20) of the bin 
to be programmed. 
NOTE: It is recommended that: 
Bin 17 be reserved for an entry that will reference 
special table...

Digital Key Telephone Systems sTARPLUS@ SPD 1428 & 2866 
Exception Tables Programming (Cont’d) 
Allow Table Programming (Cont’d) 
Programming Steps 
XXX = Area code (must match AREA-X entry) 
DDD = “Don’t Care” digit (three entries, 
DND button) 
{S}= Search Special Table Command 
(TRANS button) 
2. For an entry that is to reference the Home Area 
Code table (special table 4) the entry may also 
be entered to expect or not expect a leading 
digit [il. In fact in some cases it may be desir- 
able to enter...

STARPLUS@ SPD 1428 & 2858 Digital Key Telephone Systems 
Exception Tables Programming (Cont’d) 
C. Deny Table Programming 
Programming Steps 
1. Press the DENY TABLE A or DENY TABLE B 
flexible button (Button #2 or #4). The following 
display will be shown on the display phone: 
The first two bin locations are displayed. 
2. Enter the two-digit bin number (01-10) of the bin 
to be programmed. 
3. Enter the deny code: 
where: 
0 to 9, 
l , # = corresponding deny digits (numbers) 
MUTE = Don’t Care digit...

Digital Key Telephone Systems sTARPLUS@ SPD 1428 & 2856 
Exception Tables Programming (Cont’d) 
D. Special Table Programming 
Programming Steps 
To program a special table, it is first necessary to 
assign an area code to the table (except for the home 
area code). 
To assign an area code to a special table: 
1. Press the appropriate AREA CODE TABLE 
(i-4) flexible button (button #9-l 1). The follow- 
ing display will be shown on the display phone: 
2. Enter the three (3) digit area code. 
3. Press the...

Exception Tables Programming (Cont’d) 
E. Displaying Toll Table Entries 
Programming Steps 
To display entries in either the Allow/Deny tables or 
the soecial tables: Description 
It is possible to view entries in the toll tables using 
the disDlav on the Executive teleDhone. To view all 
1. 
2. Press the DISPLAY TABLES flexible button entries: the DISPLAY TABLES flexible button (But- 
(button #12) while entering information into a ton #12) is pressed multiple times to scroll through 
table. the entries....

sTARPLUS@ SPD 1428 & 2888 Digital Key Telephone Systems 
SECTION 655 
.  LEAST COST ROUTING PROGRAMMING 
A. Introduction 
Least Cost Routing (LCR) selects the most economi- 
cal programmed route for an outgoing call. When a 
station user dials an outside number, the LCR fea- 
ture analyzes the number and then automatically 
chooses an outside line from the group that has been 
programmed as most economical. The LCR feature 
puts the responsibility of choosing the least expen- 
sive route for each area...