Vodavi Starplus Hybrid Key Telephone System Installation Manual

Digital Key Telephone Systems sTARPLUS@ SPD 1428 & 2866 
routes. Routes are determined by the time of day 
and day of week as specified in the Daily Start Time 
table and the Weekly Schedule table. 
After the appropriate route is selected, LCR Class of 
Service becomes applicable. A station can use only 
those line groups programmed with a priority number 
equal to or higher than the station’s LCR Class of 
Service. 
If a line is not available in the first choice line group, 
the system advances to the...

STARPLUS@ SPD 1428 & 2858 Digital Key Telephone Systems 
LCR PROGRAMMING (Cont’d) 
C. LCR Programming 
Programming Steps 
If the system is in the programming mode, continue 
using the program codes. If starting to program here, 
enter the programming mode. (Refer to Sec. 600.2). 
To program the system for Least Cost Routing: 
1. Press FLASH and dial [75]. The following mes- 
sage is shown on the display phone: 
2. There are eight tables which can be pro- 
grammed here for LCR (you must also program 
LCR...

Digital Key Telephone Systems sTARPLUS@ SPD 1428 & 2656 
LCR PROGRAMMING (Cont’d) 
D. 3-Digit Area/Office Code Table 
Programming Steps 
1. Press 3-DIGIT TABLE flexible button (Button # 
1). The following message will be shown on the 
display phone: 
, Where: 
L = [0] for non leading 1 (“1” not dialed) 
[l] for leading l(y1’ is dialed) 
NNN = area/office code 
RR = route list number 00-15 
Y = [0] do not go to 6 digit table 
[l] go to 6 digit table 
PP = number of digits expected to be 
dialed. 
2. Press...

sTARPLUS@ SPD 1428 & 2858 Digital Key Telephone Systems 
LCR PROGRAMMING (Cont’d) 
E. 6-Digit Office Code Table 
Programming Steps 
1. Press the 6-DIGIT TABLE flexible button (But- 
ton # 2). The following message is then shown 
on the display phone: 
Where: 
S = [0] to remove codes 
[l] to add codes 
AAA = area code 
RR = route number 00-15 
NNN = office code 
2. Press HOLD after each office code entry. 
3. Enter additional office codes to be programmed 
into the same Area Code/ Route Table, press- 
ing...

Diqital Key Telephone Systems sTARPLUS@ SPD 1428 8c 2656 
LCR PROGRAMMING (Cont’d) 
F. 
1. Exception Code Table 
Programming Steps 
Press EXCEPTION TABLES flexible button 
(Button #3). The following message will be 
shown on the display phone: Description 
Exception Table. This table is used for operator 
calls and any other calls which would use a one- or 
two-digit entry rather than a three-digit area code. 
Where: 
4 
S = [0] to remove code from table 
[l] to add code to table 
XX= exception codes...

STARPLUS@ SPD 1428 & 2856 
Digital Key Telephone Systems 
LCR PROGRAMMING (Cont’d) 
G. 
1. Route List Table 
Programming Steps 
Press the ROUTE LIST TABLE flexible button 
(Button #4). The following message will be 
shown on the display phone: 
Where: 
RR = Route List Table number 00-l 5 
T = Time Period Route list 1-4 
G = CO tine Group 1-7 
DD = Insert/Delete Table reference 00-l 9 
(## for none) 
L= LCR Class of Service (LCOS) 
2. Press HOLD. Display will now update. 
3. To enter additional CO line...

Digital Key Telephone Systems sTARPLUS@ SPD 1428 & 2856 
LCR PROGRAMMING (Cont’d) 
H. Insert/Delete Table 
Programming Steps 
1. Press INSERT/DELETE TABLE flexible button 
(button #5). The following message will be 
shown on the display phone: 
Enter the table information as follows; 
Where: 
lT = Insert/Delete Table Number 00-I 9 
X = [0] Pre-Delete numbers (first digits 
dialed in the number) 
[l] Pre-Insert numbers (insert digits 
in front of number dialed) 
[2] Post-Insert numbers (insert digits...

%ARPLUS@ SPD 1428 & 2858 Digital Key Telephone Systems 
I. Daily Start Time Table 
Programming Steps Description 
1. Press the DAILY START flexible button (button Daily Start Time Table. The daily start time table is 
#6). The following message will be shown on used to correlate the LCR routing table to the time 
the display phone: sensitive discount structure offered by the customers 
carrier. For example in the most common situation 
the most expensive rate period is between 8:00 am 
and 500 pm, often...

Digital Key Telephone Systems %ARPLUS@ SPD 1428 & 2656 
LCR PROGRAMMING (Cont’d) 
J. 
1. Weekly Schedule Table 
Programming Steps 
Press the WEEKLY SCHED flexible button 
(button #7). The following message will be 
shown on the display phone: 
4 Where: D= Day of the Week 
0= Monday 
1= Tuesday 
2= Wednesday 
3= Thursday 
4= Friday 
5= Saturday 
6= Sunday 
T = Time Period Route List (l-4) to use for the time 
of day (based on the daily start time table). Enter 
values for all time periods specified in the...

sTARPLUS@ SPD 1428 & 2856 Digital Key Telephone Systems 
LCR PROGRAMMING (Cont’d) 
K. LCR Routing for Toll Information 
Programming Steps 
1. Press TOLL INFO flexible button (button #8) 
The following message will be shown on the 
display phone: 
2. Enter P-digit Route List number (00-15) for the 
Route to be referenced in the Route List Table. 
3. Press HOLD after programming the Route 
number. Display will now update. 
Enable LCR at this point. Refer to System program- 
ming. Description 
Toll...