Vodavi Starplus Hybrid Key Telephone System Installation Manual

PAGE “A” STATION ATTRIBUTES (Cont’d) 
B. Do Not Disturb 
Programming Steps Description 
1. Press the DO NOT DISTURB flexible button DO NOT DISTURB. Stations can be individually 
(Page A, Button #2). It will toggle on and off with allowed or denied the ability to place their telephone 
each depression. in Do Not Disturb. 
Default: By default, Do Not Disturb is allowed at all 
stations. 
l LED on = Do Not Disturb is allowed 
l LED off= Do-Not Disturb is denied 
2. Press HOLD button. Display will now...

Digital Key Telephone Systems STARPLUS@ SPD 1428 & 2856 
PAGE “A” STATION ATTRIBUTES (Cont’d) 
Executive Override 
Programming Steps Description 
Press the EXECUTIVE OVERRIDE flexible 
button (Page A, Button #4). It will toggle on and 
off with each depression. 
l LED on = Executive Override is allowed 
l LED off= Executive Override is denied 
Press HOLD button. Display will now update. EXECUTIVE OVERRIDE. This feature allows cer- 
tain stations to be designated as “Executive” stations 
with the ability...

sTARPLUS@ SPD 1428 & 2858 
Digital Key Telephone Systems 
PAGE “A” STATION AlTRIBUTES (Cont’d) 
E. Privacy (Per Station) 
Programming Steps 
To program station(s) for Automatic Privacy: 
1. Press the PRIVACY flexible button (Page A, 
Button #5). It will toggle on and off with each 
depression. 
l LED on = Privacy is enabled on Stations(s) 
l LED off = Privacy is disabled on Station(s) 
2. Press HOLD button. Display will now update. Description 
PRIVACY. The system provides privacy on all com-...

PAGE ‘VI” STATION AlTRIBUTES (Cont’d) 
F. Speed Dialing Access 
Programming Steps 
1. Press the SPEED flexible button (Page A, But- 
ton #6). It will toggle on and off with each 
depression. 
0 LED on = Speed Dialing access is allowed 
l LED off= Speed Dialing access is denied 
2. Press HOLD button. Display will now update. 
G. Line Queuing 
Programming Steps Description 
1. Press the QUEUING flexible button (Page A, 
Button #7). It will toggle on and off with each 
depression. 
l LED on = Queuing is...

STARPLUS@ SPD 1428 & 2858 Digital Key Telephone Systems 
PAGE “A” STATION AlTRIBUTES (Cont’d) 
H. 
1. 
2. Preferred Line Answer 
Programming Steps 
Press the PREF LINE ANSWER flexible button 
(Page A, Button #8). It will toggle on and off with 
each depression. 
l LED on = Preferred Line Answer is allowed Description 
PREF LINE ANSWER. Stations can be given the 
ability to answer incoming outside line calls, trans- 
ferred and recalling lines and line queues by simply 
going off-hook. (Preferred tine...

Digital Key Telephone Systems STARPLUS@ SPD 1428 & 2666 
PAGE “A” STATION AnRlBUTES (Cont’d) 
J. Call Forwarding 
Programming Steps 
1. Press the CALL FORWARD flexible button 
(Page A, Button #lo). It will toggle on and off 
with each depression. 
l LED on = Call Forwarding is allowed 
l LED off= Call Forwarding is denied 
2. Press HOLD button. Display will now update. 
K. Forced Least Cost Routing 
Programming Steps 
1. Press the FORCED LCR flexible button (Page 
A, Button #l 1). It will toggle on and...

sTARPLUS@ SPD 1428 & 2866 Digital Key Telephone Systems 
PAGE “B” STATION PROGRAMMING 
Programming Steps 
The remaining station features are located and pro- 
grammed on Page B. 
a. Press [PG B] button. The display of current 
programming for those features will appear as 
follows: 
Where: 
XXX= Station Range 
B= Page “B” Features 
ID= Station Identification (O-5 
COS= Class of Service (l-6) 
SPK= Speakerphone Option (O-2) 
A= Pickup Group (l-4) 
B= Paging Zone (l-4) 
CC= Preset Forward Destination 
DD=...

PAGE “B” STATION AlTRIBUTES (Cont’d) 
L. Station ldentif ication 
Programming Steps 
1. Press the STATION ID flexible button (Page B, 
Button #l). 
To program the Station ID for a Digital Terminal: 
1. Dial a [0] on the dial pad. 
2. Press HOLD button to complete the entry. Dis- 
play will now update. 
To program the Station ID for a DSS/DLS Console 
with Map 1, Map 2 or Map 3: 
1. Dial either a [1],[2] or [3] on the dial pad. 
2. Enter the three-digit station number (100-155) 
which the DSWDLS Console...

wARPLUS@ SPD 1428 & 2858 
Digital Key Telephone Systems 
PAGE “B” STATION ATMBUTES (Cont’d) 
Station Identification (Cont’d) 
Programming Steps 
To program the Station ID for a SLT or OPX Station: 
1. Dial a [5] on the dial pad. 
2, Press HOLD button to complete the entry. Dis- 
play will now update. 
To program the Station ID for a SLT w/Message 
Waiting Lamp: 
1. Dial a [S] on the dial pad. 
2. Press HOLD button to complete the entry. Dis- 
play will now update. 
To program the Station ID for an SLT...

Digital Key Telephone Systems sTARPLUS@ SPD 1428 & 2856 
PAGE “B” STATION AlTRIBUTES (Cont’d) 
M. 
1. 
2. Station Class of Service (COS) 
Programming Steps 
Press the CLASS OF SERVICE flexible button 
(Page B, Button #2). 
Enter a two-digit Class of Service entry as 
follows: 
l 1st digit is day COS 
l 2nd digit is night COS Description 
CLASS OF SERVICE. Each stations must be as- 
signed a certain COS for day mode operation, and 
also be assigned a COS for night mode operation. 
The night COS goes into...