Vodavi Starplus Hybrid Key Telephone System Installation Manual

Digital Key Telephone Systems BARPLUS@ SPD 1428 & 2866 
CO LINE AlTRIBUTES (Cont’d) 
A. DTMF/Dial Pulse Programming 
Programming Steps 
1. Press the DTMWDIAL PULSE 
(Button #l). 
l LED on = DTMF enabled 
l LED off= Dial Pulse enabled flexible button 
2. Press HOLD button. Display will now update. Description 
DTMF/DIAL PULSE. Each individual outside line 
can be programmed to be either DTMF (tone) or dial 
pulse. When a line is assigned as dial pulse, you can 
program the break/ make ratio and dial...

STARPLUS@ SPD 1428 & 2856 Digital Key Telephone Systems 
CO LINE ATTRIBUTES (Cont’d) 
D. DISA Trunk-to-Trunk (Per CO Line) 
Programming Steps 
if the CO line DISA Trunk-to-Trunk (Conference) 
attributes is to be changed: 
1. Press the DISA TRK-TO-TRK flexible button 
(Button #4). 
l LED on = DISA Trunk-to-Trunk is enabled (a 
“C” is displayed) 
l LED off = DISA Trunk-to-Trunk is disabled 
2. Press HOLD button. Display will now update. Description 
DISA TRK-TO-TRK. The DISA Trunk-to-Trunk (or 
Conference)...

Digital Key Telephone Systems %ARPLUS@ SPD 1428 & 2888 
CO LINE ATTRIBUTES (Cont’d) 
E. Privacy 
Programming Steps 
If CO tine privacy is to be changed: 
1. Press the PRIVACY flexible button. (Button #5. 
l LED on = Privacy is enabled 
l LED off = Privacy is disabled 
2. Press HOLD button. Display will now update. Description 
PRIVACY. If desired, the system can be pro- 
grammed to eliminate CO Line privacy, allowing 
another station to join in on existing outside line 
conversations. 
Stations must have...

STARPLUS@ SPD 1428 & 2858 Digital Key Telephone Systems 
CO LINE AlTRIBUTES (Cont’d) 
F. Loop Supervision Programming 
Programming Steps 
1. Press the LOOP SUPV flexible button (Button 
w- 
2. Enter a one-digit timer value on the dial pad 
between 1 and 9 which corresponds to 100-900 
msec. 
3. Press HOLD button. Display will now update. 
G. DISA Programming 
Programming Steps 
1. Press the DISA flexible button (Button #7). 
2. Enter a one-digit value to indicate type of DISA 
desired. 
I= 24 hour 
2=...

Digital Key Telephone Systems sTARPLUS@ SPD 1428 & 2866 
CO LlNE AlTRIBUTES (Cont’d) 
H. Flash Timer Programming 
Programming Steps 
1. Press the FLASH TIMER flexible button (Button 
#8). 
2. Enter a two-digit timer value between 01-20 
which corresponds to 100 msec-2 seconds. 
3. Press HOLD button. Display will now update. Description 
FLASH TIMER. Flash is a programmable opening 
on a line for signaling. When using an outside line, 
flash allows a user to obtain new dial tone without 
losing the line....

STARPLUS@ SPD 1428 & 2856 Digital Key Telephone Systems 
CO UNE ATTRIBUTES (Cont’d) 
J. Class of Service (COS) Programming 
Programming Steps 
1. Press the LINE COS flexible button (Button 
#lO). 
2. Enter a one-digit value between l-5 which cor- 
responds to five possible class of service to 
which a line may be assigned: 
COSi= No restrictions. 
COS2= Table A governs, Station COS 2 and 
4 are monitored. 
COS3= Table B governs, Station COS 3 and 
4 are monitored. 
COS4= Restricts O,l,*,# dialed as first...

Digital Key Telephone Systems sTARPLUS@ SPD 1428 & 2866 
CO LINE ATTRIBUTES (Cont’d) 
K. CO Line Ringing Assignment 
Programming Steps 
Each CO line in the system may be assigned initial 
incoming ringing to one of the following destinations: 
l one or more stations (keyset or SLT) 
l to a UCD, Voice Mail or Hunt Group 
e Off-Net (via speed dial) 
1. Press the RING ASSIGNMENT flexible button 
(Button #ll) to toggle to the Ringing Assign- 
ment display. The display will show the follow- 
ing information:...

STARPLUS@ SPD 1428 & 2858 
Digital Key Telephone Systems 
CO LINE ATTRIBUTES (Cont’d) 
620.2 DIAL PULSE PARAMETERS 
Programming Steps 
If this feature is to be assigned: 
a. Press FLASH and dial [41]. The following mes- 
sage is shown on the display phone: 
b. Choose dial pulse features by pressing the 
appropriate flexible button(s) in the flexible field. 
c. The buttons toggle on and off: 
0 LED on = 60/40 (RATIO), 1Opps (SPEED) 
l LED off = 66133 (RATIO), 2Opps (SPEED) 
d. Press HOLD button....

SECTION 630 
STATION AlTRIBUTES PROGRAMMING 
630.1 INTRODUCTION 
Programming Steps 
Description 
If the system is in the programming mode, continue 
using the program codes. If starting to program here, 
enter the programming mode. (Refer to Sec. 600.2). 
If station features are to be changed: 
a. Press FLASH and dial [50]. The following mes- 
sage is shown on the display phone: 
b. 
C. 
Enter a six digit number (100-155) for station 
range being programmed. If only one station is 
being programmed,...

Digital Key Telephone Systems STARPLUS@ SPD 1428 & 2856 
PAGE “A” STATION AlTRIBUTES (Cont’d) 
Programming Steps 
Paging Access 
Programming Steps 
Press the PAGE ACCESS flexible button (Page 
A, Button #l). It will toggle on and off with each 
depression. 
l LED on = Paging is allowed 
l LED off= Paging is denied 
Press HOLD button. Display will now update. Description 
Station Attributes that require only an Allow/Disallow 
or Enable/Disable (toggle) operation to set in pro- 
gramming for stations are...