Vodavi Starplus Automatic Voice Processing Technical Manual

STARPLUS @ AVP TECHNICAL MANUALINSTALLATION
Starplus 2856 Digital Settings (2856.PBX)System
lInput Lengths - 3 Digit mailbox and extension lengths,
password is 4 digits
Global Settings 
-
lInitiate Channels - All 4 ports default to Voice Messaging
(day, night, weekend, holiday)
lNumber of Rings - 2
Mailboxes
lMailbox numbers: 100 - 155. Also one mailbox number
999. Mailbox 999 is set to forward to disconnect menu at
all times. This mailbox should not be changed. Mailbox(s)
100 
- 155 set to COS 0 and no...

INSTALLATIONSTARPLUS @ AVP TECHNICAL MANUAL
Utility Menu 
[3.BAT]This is the menu that allows you to select the various system op-
tions. Each of these option is described individually. The items on
this menu are:
o Voice Board, [A]
. CPC Auto, [B]
-
lTime and Date, [C]
lDelete Log Files, [D]
l Message Backup, [E]
l Restore Messages, [F]
lLoad 2448 System, [G]
eLoad 96EX System, [H]
lLoad 1428 System, [I]
lLoad 2856 System, [J]
lLoad SPX System, [K]
l Save Configuration, [L]
l Restore Defaults, [M]...

STARPLUS @ AVP TECHNICAL MANUALINSTALLATION
Voice Board 
[A.BAT]This option runs the 
D40CHK program which performs tests on
the voice board. To run this follow this procedure:
1.Press [A] from the utility menu.
The system will load the’ 
D40CHK program and the main
screen will appear after a few seconds.
The left side of the screen will show the current board(s) installed
in the system, their IRQ, Address, type , and firmware settings.
2.Make sure the Mem test, Int test, Multi-lnt test, and Loop
0001...

INSTALLATIONSTARPLUS @ AVP TECHNICAL MANUAL
CPC Auto [B.BAT]
This option describes the procedure for running CPC Auto. CPC
Auto is used when connecting the AVP to a non-Starplus phone
system. In this case, CPC Auto performs a ring and busy test with
an extension off the phone system. In doing this, CPC “learns” the
tone cadences and frequencies of the phone system. This informa-
tion is used in the Auto Attendant portion of the AVP if screened
transfers are desired. To run CPC auto type the following:
1....

STARPLUS @ AVP TECHNICAL MANUALINSTALLATION
Delete Log Files [D.BAT]This option will erase all the log information from the
C:\SPAVP\LOGS directory. This should only be used when the
Erase Logs feature in the Configuration\System\Logging database
item is not enabled. If this item is enabled, the system will automat-
ically, on a monthly basis, delete the logs. This provides valuable
disk space for the voice messaging feature.’ If you want to back
the current log information up, go into programming under...

INSTALLATIONSTARPLUS @ AVP TECHNICAL MANUAL
1.Enter a [E] and follow the directions on screen.
Restore Messages [F.BAT]This option is used after the above option to restore the messages
to the C:\SPAVP\MESSAGES directory. When done after loading
new software, the installation procedure has already created the
message directory structure. This allows the messages to be re-
stored to the same directory they were backed up from. Again this
is not a normal maintenance function.
1.Enter a [F] and follow the...

STARPLUS @ AVP TECHNICAL MANUALINSTALLATION
Load 2448 Settings 
[G.BAT]This option loads the 
Starplus 2448 phone settings into the AVP
for proper interfacing. Any current phone information is checked
for and if found, a caution message will be prompted. The option
loads the following information specifically for the 2448:
l Mailbox Numbers
l Extension Numbers
lFeature Prefixes, input Lengths
You must also go into database programming and load the phone
setting from the Configuration/Environment/Phone...

INSTALLATIONSTARPLUS @ AVP TECHNICAL MANUAL
Load 2856 Settings 
[J.BAT]This option loads the 
Starplus 2856 digital phone settings into the
AVP for proper interfacing. Any current phone information is
checked for and if found, a caution message will be prompted.
The option loads the following information specifically for the 2856:
o Mailbox Numbers -l Extension Numbers
lFeature Prefixes, Input Lengths
You must also go into database programming and load the phone
setting from the...