Trillium Panther Ii Feature Module Iv System Manual

Panther II 820/1032/2064-205 
Class B’ - dialing any of the preprogrammed entries from “Deny 
Table B” or dialing the number of “Digits to Deny” when Behind 
PBX/Centrex, or dialing a restricted Common Speed number from the 
“Split Restriction Table for Class B” will restrict a call. 
Class C - no outside calls can be made, except those telephone 
numbers beginning with preprogrammed entries included in “Allow 
Table C”, or dialing Common Speed Call numbers that are unrestricted 
in the “Split...

Trillium Standard Practice 
ACCOUNT CODE TYPE: Specifies whether the system will 
accept Forced or Manual Account Codes from a station. Refer to 
Panther II 820/1032/2064-105, Features and Services for details. This 
code is completed in conjunction with FORCED/MANUAL 
ACCOUNT CODE DIGITS in System Programming. 
Preprogrammed Value = Manual Account Codes. 
STATION SECURITY: (Use Table 2-lla). Determines 
whether or not a station user must dial the Station Security Code, to 
have access to an outside C.O....

Panther II 820/1032/2064-205 
MANUAL / AUTO INTERCOM / AUTO ‘LINE SELECT: 
Determines whether the Intercom Line is selected automatically, or a 
C.O. Line is selected automatically or whether the selection must be 
made manually when the handset is lifted. 
Preprogrammed Value = Auto Intercom Line. 
HANDSET / HEADSET COMPATIBLE: Allows either a 
handset or headset to be used at each station. 
Preprogrammed Value = Handset. 
BLOCK PROGRAMMING: Allows the programming selections 
for a station to be...

Trillium Standard Practice 
TABLE 2-11 STATION PARAMETERS 
Feature Access 
Description Code Condition 
(Values) Data 
Code 
Type of Set 1OOY-Y Panther 1032 or 2064 Set 0 
Panther 306 or 612 Set 
Panther II Display Set ,,_l__ 
1 .___. I 2 2 w t I ..:“‘-T;.ge5 
Panther II Set 3 
Off-Hook Voice 
AMOUXX 4 
Default is a Panther II Display Set for Station 10 (Master Se-t), and Panther 1032l2064 Sets for ail other stations. 
____________________~~~~~~~~~~~~~~~~~~~~~~~~~~...

Panther II 820/1032/2064-205 
TABLE 2-11 (Cont’d) 
STATION PARAMETERS 
Feature Access 
Condition 
Data 
Description Code 
(Values) 
Code 
Manual Select /Auto 113YY 
Automatic Intercom* 
Intercom/Auto C.O. 
Automatic CO. .&i 
, 
Manual 
Select 
2 +-&70~ ____________________~~~~~~~~~~~~~~~~~~~~~_~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~_~~~_~____~~______~____. 
Handset / 115YY 
Handset* 
0 
Headset 
Headset 
1 
-___________________~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~__~~___________...

Trillium Standard Practice 
TABLE 2-11(a) STATION SECURITY 
___________________________~___~~~______~~~~~~~~~~~~~~~~~~~~~~~~~~~~~_____________~~~~__~~~~~~___~_____ 
This feature prevents unauthorized users from accessing an outside line at a station. 
Before an outside line can be obtained, users must dial a security code. 
Programming instructions provided on this page must be completed from the Master 
Station (preprogrammed as Station 10). Station Security is programmed in two stages. 
During the...

Panther II 820/1032/2064-205 
PROCEDURE 2 - TO SECURE A STATION 
NOTE: The following procedure must be completed twice for each station; once for 
Night Mode and once for Day Mode: 
1. 
2. 
3. At Station 10, press the PROGRAM key (or dial * #) to enter Programming 
Mode. 
Dial the digits 0 9. 
Dial the 2-digit station number (10 to 73). Then, 
4. (A) TO ENABLE STATION SECURITY DURING DAY MODE, dial 
l 0 1 - Security Code Required Vor LOW level and NIGHT level privileges) 
l 0 0 - CSecurity Code Required...

Trillium Standard Practice 
\. 
FLEXIBLE RINGING ASSIGNMENT: j 
2.19 After filling in your Flexible Ringing Assignment selections in: 
. 
Table 2- 12 (if you are connecting a Panther II 820 System), 
. 
Table 2-13 - for the first 10 lines/32 stations (if you are 
connecting a Panther II 1032 System), 
OR 
. Table 2-,r3 and Table 2-14 (if you are connecting a Panther II 
2064 System), 
Step 1. 
Step 2. At Station 10 (using a Panther II Display Set), dial * # 0 
1 5. 
Dial 119YY (where YY is a 2-digit...

Panther II 820/1032/2064-205 
Step 5. After the inputted data is displayed, press the HOLD key to 
increment to the next line. 
Step 6. Repeat Steps 4 and 5 for each line assignment at that station. 
When the last line assignment has been entered: 
. Press the HOLD key to increment to the next station number, 
OR 
. 
Press # 
to store all previous data or dial a new access code. 
Step 7. Press the * key to exit programming when all selections have 
been made. The new programming is complete. 
-...

Trillium Standard Practice 
TABLE 2-12 FLEXIBLE RINGING ASSIGNMENT 
PANTHER II 820 SYSTEM 
Check off which lines you would like to ring at each station. 
STATIONS 
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 2 
1 
2 
C.O. 3 
LINES’ 4 
5 
6 
7 
8 
I I I I I I I I I I I I I I I I I I I I 
Programming 
Page 40