Trillium Panther Ii Feature Module Iv System Manual

Panther II 820/1032/2064-205 
Class B - dialing any of the preprogrammed entries from “Deny Table 
B” or dialing the number of “Digits to Deny” when Behind 
PBXKentrex, or dialing a restricted Common Speed Call number from 
the “Split Restriction Table for Class B” will restrict a call. Digits 
dialed in “Allow Table B” will be accepted. 
“Deny Table B” consists of eight possible I - to 4-digit entries. 
Preprogrammed entries include the digits 0 and I. 
“Allow Table B” consists of eight possible I - to...

Trillium Standard Practice 
TABLE 2-7 TOLL RESTRICTION PARAMETERS 
Feature Access 
Description Code Condition 
(Values) Data 
Code 
Digits to Deny 014 No Restriction 
1st digit 
2nd digit 02 
3rd digit 
4th digit E 
5th digit 
6th digit E 
7th digit 
8th digit* :;: 
9th digit 09 
10th digit 10 
1 lth digit 11 
12th digit 12 
13th digit 13 
14th digit 14 
15th digit 15 
__________________________~~~~__~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ______~_____________~~~~~~~~~~~~~~~~~. 
Split Restriction 0150 First 40s -...

Panther II 820/1032/2064-205 
TABLE 2-7(a) TOLL RESTRICTION TABLES 
Feature Access 
Condition Data 
Description Code 
(Values) Code 
Deny Table A 042000 
for Class A’ 042001 Entry 1 (Default =411) PPPP 
PPPP 
042002 Entry 2 (Default = 555) 
042003 Entry 3 (Default = 976) PPPP 
Entry4 PPPP 
042004 PPPP 
042005 Entry 5 
042006 Entry6 PPPP 
Entry 7 PPPP 
042007 Entry8 PPPP 
Oiioi2 w___ ____ 
Entry 13 PPPP 
042013 Entry 14 PPPP 
042014 Entry 15 PPPP 
042015 Entry 16 PPPP...

TrilIium Standard Practice 
Tenanting 
2.14 The Tenanting Parameters, including Access Codes and Data Codes are 
provided in Table 2-8. Refer to 
Panther II 820/1032/2064-105, Features and Services 
for more details. They are: 
TENANT TYPE: This programming is completed in conjunction 
with Flexible Ringing Assignment, Private/Non-Private Tenanting, 
Tenant Group and Tenant Group Assignment. It allows you to choose 
one of four possible line group types: 
Type A - Sets assigned to this line group can...

Pinther II 820/1032/2064-205 
TABLE 2-8 TENANTING PARAMETERS 
Feature Access 
Condition 
Data 
Description Code 
(Values) 
Code 
Tenant Type 006 
TypeA* 0 
Type B 
Type C 
: 
TypeD 3 
____________________~~~~~--~~~~~~~~~~~~~~~~~~~~~~---~~--~~~-~~~~~~~~~~~~~~~~~~~~~~~~~__~~____~____. 
Private/Non-Private 054 Private Mode* 
0 
Tenanting 
Non-Private Mode 
1 
Notes: * denotes preprogrammed value. 
Station Message Detail Recording 
2.15 
Station Message Detail Recording Parameters, including Access Codes and...

Trillium Standard Practice 
SMDR CALL TIMING: Defines the time (grace period) before the 
SMDR Unit starts recording information. The chosen value should 
take into account the average length of time for an outgoing call to be 
processed and answered. The call timer begins after the last dialed 
digit. Parameters are from 1 second to 61 seconds. 
Prep;ograrnmed Value = 5 seconds. 
DIGIT TIMER: Since the SMDR timer needs to recognize when the 
last digit is actually dialed, a second timer verifies...

Panther II 820/1032/2064-205 
TABLE 2-9 (Cont’d) 
SMDR PARAMETERS 
Feature 
Access 
Condition 
Data 
Descriution 
Code 
fvalues) 
Code 
SMDR Call Timing 009 
1 sec. 
5 sec.* 
0”: 
9 sec. 
13 sec. 
:3’ 
17 sec. 
21 sec. 
:: 
25 sec. 
29 sec. 
00; 
33 sec. 
08 
37 sec. 
09 
41 sec. 
10 
45 sec. 
11 
49 sec. 
12 
53 sec. 
13 
57 sec. 
14 
61 sec. 
15 
-~~~~_--~____--~__~______~~~______,,,____~~_~______________~~_____ 
______-____--_-_____~~~~~~~~~~~~~~ 
Digit Tiir 
010 
1 sec. 
2 sec. 
z 
3 sec. 
4 sec. 
if...

Trillium Standard Practice 
SMDR Startup Operation 
2.16 
Time and date setting used by the SMDR Unit is set automatically when the 
system clock is programmed from Station 10. (See “Setting Date/Time” procedures 
outlined in the 
Panrher !I Display Ser Guide for instructions). If the system has already 
been in operation and the SMDR option is added later, there is no need to set the Sh4DR 
clock. Refer to 
Panther II 820/1032/2064-200, Installation and Commissioning for 
installation instructions. Date...

Panther II 820/1032/2064-205 
Outgoing data appears on the printout as follows: 
07/23 03:22P 00:02:24 014 000 16135922550 TOO1 Al234 
I 
I I Line used Account Code 
Telephone # dialed T stands for trunk 
I 
‘Not Used for outgoing calls 
Station that placed the call 
Call Length - Seconds 
>all length - Minutes  ( 
Call length 
- Hours 
PM time 
- no designation for AM 
-ime of day 
- Minutes 
IIme of day 
- Hours 
Jay of Month 
nonth of year 
Using the SMDR Printout to Verify Data and Check Speed Calls...

Trillium Standard Practice 
‘.Y 
4. Once the printout has completed, the Intercom LED will light steady, j 
signifying that the printer has stopped. 
5. Another printout may be generated by repeating Steps 2 and 3 again 
(and selecting another code at Step 3). 
OR E;izar programming may be changed as outlined in the programming 
. 
OR Dial * to put the system back into operational mode. 
STATION PROGRAMMING 
2.18 The General Station Parameters, including Access Codes and Data Codes are 
provided in...