Trillium Panther Ii Feature Module Iv System Manual

Trillium Standard Practice 
Condition 
l -The Executive Override feature is assigned to individual Sets during 
system programming. Only Sets which have the feature assigned to them 
can activate the feature. 
l Only one user can ‘barge into’ a conversation at a time. 
Programming Required 
l Access Code 026 - Executive Override Tone 
l Access Code 102 - Executive Override Capability 
EXTERNAL LOUDSPEAKER PAGING 
Description 
This feature allows an announcement to be made through an optional 
external...

Panther II 820/1032/2064-105 
Programming Required 
None 
HANDSFREE ANSWERBACK 
Description 
When an intercom call (by voice) is placed to a Non-Handsfree Set, if the 
user’s microphone is on, the user can have a handsfree conversation simply 
by speaking in the direction of the Set. 
Conditions 
l All Non-Handsfree Sets except the Panther II Set have Handsfree 
Answerback on intercom. 
Programming Required 
None 
INCOMING CALLS 
Description 
Incoming calls are 
defmed as calls which are received over...

Trillium Standard Practice 
Programming Required 
Any or all of the following can be programmed: 
l ’ Access Code 119 - Flexible Ringing Assignment 
l Access Code 105 - Ringing Line Preference 
l Access Code 047 - Simultaneous / Serial Ringing 
(Discriminating Ringing) I’ 
l Access Code 006 - Tenant Types 
INTERCOM PAGING (DSS!BLF KEYSICONSOLES) 
_ 
To an Individual Station 
Description 
The 
Individual Intercom Paging feature allows the user to make voice 
paging announcements to specific stations by...

Panther II 820/1032/2064-105 
programmable length of time before being forwarded to the appropriate 
station. 
Call Forward - BusylNo Answer, directs the internal calls that 
are sent to a user’s station to another station if 
the Set is busy or hes not 
answer. For Call Forward. 
- No Answer, the Set will ring for a 
programmable length of time before being forwarded to the appropriate 
station. 
When Call Forwarding is activated, the Intercom indicator lamp flashes 
quickly and the LCD (on Panther II...

Trillium Standard Practice 
Line Pool 
: 
: Access Code 
::: 
403 
404 
Pressing a line pool key will select the first available line in the pool. If 
none of the lines in the pool are free, the user can queue for the line pool, 
using the same methods as normal line queuing. See also Section 4, LINE 
POOLS. 
Programmable Feature Keys allow a specific key or several keys to be 
programmed as Line Pool keys (See Section 5, PROGRAMMABLE C.O. 
LINES for more details). 
Conditions 
l Line Pools must be set...

Panther II 820/1032/2064-105 
MEET-ME ANSWER 
Description 
This feature allows a user to respond to an ALL PAGE, ZONE PAGE or 
EXTERNAL LOUDSPEAKER PAGE announcement, by dialing a code. 
When the user dials the Meet-Me Answer Code, they are automatically 
connected to the station that performed the paging announcement. 
Conditions 
l None 
Programming Required 
None 
MESSAGE WAITING 
Description 
The 
Message Waiting feature allows any station to leave a message waiting 
signal at a Set which is busy or...

Trillium Standard Practice 
Conditions 
l When the Intercom key (or # key on a Panther II Set) is pressed while the 
Intercom Indicator lamp is flashing, internal dial tone will not be heard 
- priority is given to contacting the station that left a message. 
Programming Required 
None 
MUSIC ON HOLD 
Description 
When an optional music source is connected to the Panther II system, calls 
on hold will hear background music automatically. 
Conditions 
l Ensure that the proper music input to the KSU is...

Panther II 820/1032/2064-105 
Programmable Feature Keys allow a specific key to be programmed as a 
Night Pickup key (See PROGRAMMABLE FEATURE KEYS in this 
Section for more details). 
Conditions 
A Set programmed to have the ringing line appear, can also answer the 
call by pressing the appropriate line key. 
The ringing call of lowest numbered line will be picked up first. 
The first user to dial the Night Pickup code (or press the appropriate line 
key), will answer the call. 
Programming 
None...

Trillium Standard Practice 
ON HOLD ACCESS 
Description 
To retrieve calls on hold, a user can either press the line key (if the line 
appears at their Set), or dial 6. Calls can be retrieved off-hook or on-hook. 
Pressing the 6 key will retrieve calls in the order that they were placed on 
hold at the station (oldest to newest). 
Conditions 
l Any available number of outside lines can be placed on hold at 
the same time, but only one internal station can be placed on hold at a time. 
Programming...

Panther II 820/1032/2064-105 
available line that the user has access to. If Prime Line Select is 
programmed for a Set, pressing the 9 key will select the Prime Line. 
l A line pool key can be pressed to select one of the four possible pools of 
lines (e.g., a pool made up of “same area” WATS lines, FX lines, local 
lines, etc.). Line Pool keys must first be programmed, using 
PROGRAMMABLE C.O. LINES information given in this 
Section. Details about line pools are provided in Section 4, LINE 
POOLS. 
l...