Trillium Panther Ii Feature Module Iv System Manual

Trillium Standard Practice 
--. 
? 
Programming Required i’ 
-’ 
l All programming for this feature is done from the Master Attendant 
station. 
l When you are programming automatic switching, you must enter the time 
using a 24-hour clock. 
ON-LINE PROGRAMMING 
Description 
Programming 
selections can be changed directly from Station 10, while the 
system is operational. All telephones except Station 10 can be used during 
the programming process, and no calls will be lost. 
Conditions 
l If the Master...

Panther II 820/1032/2064-105 
l If the system is behind PBXKENTREX, FLASH will be required. 
l Available choices for PAUSE ON NUMBER are: 7,8,9, and/or 0. 
Programming Required 
Any or all of the following: 
l Access Code 061- Type of Line 
l Access Codes 0120,0121,0122,0123 - Pause on Number 
l Access Code 013 - Pause Time 
l Access Code 005 - Flash / Cancel / Transfer 
l Access Code 011 _a Flash / Cancel Timing 
l Access Code 047 - Simultaneous / Serial Ringing (Discriminating 
Ringing) 
PICKUP GROUPS...

Trillium Standard Practice 
Conditions 
_ 
-, 
:_’ 
l To program the Private Line, one station must be assigned to one group, 
and that group must be assigned to one line. All other lines must be 
pIaced in other groups. 
Programming Required 
. 
Access Code 201- Tenant Group Assignment 
l Access Code 121- Tenant Groups 
l Access Code 006 - Tenant Types 
PROGRAMMABLE RELAY 
Description 
The Dry 
Contacts can be programmed to activate the Loud Bell equipment, 
or optional equipment such as electronic...

Panther II 820/1032/2064-105 
programmed on a set-by-set basis, during system programming. The 
system is preprogrammed to provide Ringing Line Pickup capability to all 
stations. 
If Ringing Line Pickup is programmed for a set, then all calls that ring at 
that set can be answered simply by lifting the handset, regardless of whether 
the set is programmed for Auto Line Select, Auto Intercom or Manual 
Select. 
Conditions 
l C.O. line calls have priority over Transfer Ringing if both ring at the same...

Trillium Standard Practice 
only the new station’s set type and ringing assignment must be designated 
in system programming. Feature programming for the new stations can be 
easily accomplished using the Block Programming capability (see Section 4, 
BLOCK PROGRAMMING). 
Conditions 
None 
Programming Required 
. Access Code 
100 - Type of Set 
l Access Code 119 - Flexible Ringing Assignment 
STATION HUNTING GROUPS 
Description 
Four Station Hunt Groups can be set up on the Panther II system. The ....

Panther II 820/1032/2064-105 
. The capability of clearing all Private Speed CalI numbers 
for the system. 
CAUTION: This feature should be used with extreme 
discretion. The feature is not to be confused with “Set Feature Clear”. 
Conditions 
None OR 
Programming Required 
l Access Code 070 - System Clear 
TENANT TYPES 
Description 
This programming is done in conjunction with Flexible Ringing 
Assignment, Tenant Groups and Tenant Group Assignment. It allows the 
Panther II System to be programmed on a...

Trillium Standard Practice 
Class A’ - no restrictions except the preprogrammed entries in 
Deny Table A. 
C&s I3 - dialing any of the preprogrammed entries from Deny 
Table B, or dialing the number of Digits to Deny* when Behind 
PBXICentrex, or dialing a restricted Common Speed Call number 
from the Split Restriction Table for Class B** will restrict a call. 
Digits dialed in Allow Table B will be accepted. 
Class B’ - dialing any of the preprogrammed entries from Deny 
Table B or dialing the number of...

Panther II 820/1032/2064-105 
TOLL RESTRICTION BY STATION 
Description 
Determines which one of the six classes of Toll Restriction (see Section 4, 
TOLL RESTRICTION BY LINE) will be assigned to each station. Each 
station is preprogrammed with Class A Toll Restriction. 
Conditions 
l Toll Restriction by Station will be affected if Forced Account Codes or 
Toll Security are enabled at a Set. 
Programming Required 
l Access Code 103 - Toll Restriction by Station 
TOLL RESTRICTION EXCEPTION TABLES...

Trillium Standard Practice 
STATION SECURITY 
Description 
This feature prevents unauthorized users from accessing an outside line 
from a station. Before an outside line can be accessed, users must dial a 
security code. 
Up to six possible 4-digit Station Security Codes can be designated by the 
Master Attendant for use on the Panther II system. The 4-digit codes can be 
any digits from CMXO-9999. Once the Station Security Codes are designated, 
then the Master Station provides each station in the...

Panther II ?320/1032/2064-105 
ZONE PAGING GROUPS 
Each station can be assigned to fifteen 2-digit zone paging groups (01 to 
15). Paging groups can be made up of different departments, different 
functional groups or different locations. Zone Paging announcements can 
then be made through the Set speakers, to one specific group of stations 
(which have been programmed into the specific zone), or to all sets 
simultaneously. The announcement will be heard only within the 
designated zone. 
Conditions 
l...