Toshiba Strata Dk24, Dk56, Dk96 Instruction Manual

FEATURE USE FEATURE USE 
AUTO BUSY REDIAL (continued) 
TO CANCEL ABR 
Press the m button (or m 1 I). 
NOTES: 
1. ABR will not be attempted while the station is busy on 
another call but will continue to time-out. 
2. With each attempt: SPEED DIAL (continued) 
5) Press the m (or the i) button. 
6) Dial the 2-digit speed dial code for the second telephone 
number to be dialed. 
7) Repeat the above steps for each subsequent number to be 
dialed. 
l Your system will automatically dial the numberforyou. 
8)...

FEATURE USE FEATURE USE 
SPEED DIAL BUTTONS 
PROGRAMMABLE OPTION (continued) 
4. To store * or # DTMF tones in soeed dial numbers. the 
telephone that stores the numbers must have them 
and m buttons. 
SAVED NUMBER REDIAL 
PROGRAMMABLE OPTION 
This feature enables you to store a dialed telephone number and 
later redial that number by pressing a single button. 
TO SAVE A TELEPHONE NUMBER 
1) Lift the handset. 
2) Obtain dial tone. 
3) Dial the desired telephone number. 
4) Press the m button. 
l The...

FEATURE USE 
TELEPHONE NUMBER STORAGE (continued) 
NOTE: 
FEATURE USE 
To store * or # DTMF tones in speed dial numbers, the 
tele 
cd hone that stores the numbers must have them and 
- D buttons. 
TO LINK TWO SPEED DIAL NUMBERS UNDER ONE q 
BUlTON 
You can link a second number to a number stored in one of ten 
locations in the system speed dial memory (90 - 99). This allows 
up to 37 digits to be stored under one speed dial button or code. 
Any station can link any of its assigned speed dial numbers (10...

FEATURE USE 
PRIVACY OVERRIDE 
PROGRAMMABLE OPTION 
Allows stations with common CO line buttons to override an 
existing conversation by pressing the busym line button. Up to 
two stations maximum may override an existing CO line-to- 
station call (allowing a total of up to three stations being con- 
nected to an outside line) 
TO ENTER AN EXISTING CALL BETWEEN A CO LINE AND 
ANOTHER STATION 
Press the busy 
q line button. 
l An optional tone signal is heard by the connected parties 
prior to the new...

FEATURE USE FEATURE USE 
HANDSFREE ANSWERBACK 
TO RECEIVE AN INTERCOM CALL (HANDSFREE) 
1) You will hear a single long tone, followed by the caller’s 
voice. 
l INT LED flashes at the Incoming Call rate. 
2) Leave the handset on-hook. 
3) Speak at a normal voice level in the direction of the 
telephone. 
NOTE: 
The m button must be pressed (or the handset must be 
taken off-hook) before placing an intercom call on hold. 
MICROPHONE CUT-OFF 
PROGRAMMABLE OPTION 
The m button allows a station to turn its...

FEATURE USE 
CALL TRANSFER WITH CAMP-ON (continued) CALL TRANSFER WITH CAMP-ON (continued) 
l CO LED illuminates steadily when the called station 
connects with the transferred call. 
l If the station fails to answer the call, you will receive a 
recall ring after a predetermined time. 
. . . or. . . 
3B) If the called station is busy: 
l Busy tone is heard. 
4B) Hang up. 
l INT LED goes off. 
l CO LED changes to On-hold flash rate. 
l CO line is camped-on to the called station.’ 
l Called station hears...

FEATURE USE FEATURE USE 
CALL TRANSFER WITH CAMP-ON (continued) 
cl) Press the m button (if conversing on a CO line). 
l Existing CO call is put on hold. 
l The camped-on line rings at your station. 
l CO LED changes to the Incoming Call flash rate. 
c2) Press the 
q button to answer the call. 
l CO LED changes to the In-use flash rate. 
CONFERENCE CALLS 
TO CONFERENCE UP TO TWO STATIONS AND TWO CO 
LINES, OR THREE STATIONS AND ONE CO LINE 
Establish a CO line call using a CO line button, dial the...

FEATURE USE 
CALL FORWARD-ALL CALLS 
CALL FORWARD-BUSY (continued) 
For Intercom and CO line calls (all calls will forward to a selected 
station at all times-your station will not ring when called). 
TO SET CALL FORWARD-ALL CALLS 
1) Press the m button (or dial m 1 m 0). 
l CFAC LED flashes (or hear confirmation tone). 
2) Dial the station number to which calls will forward. 
l Listen for confirmation tone if 110 was dialed. 
3) Press the m (or m button. 
l CFAC LED on steady. 
l Calls will forward to...

FEATURE USE 
CALL FORWARD-NO ANSWER (continued) 
NOTE: 
If call forward is set: 
l CO lines that ring your station only will forward-CO 
lines that ring more than one station will not forward. 
l CO line calls transferred to your station will forward. 
l Intercom calls will forward. 
l Call forward redirects the station hunt feature. 
l Call forward must be set before the call is received. 
CALL FORWARD-BUSY/NO ANSWER 
(Release 2 and higher) 
For Intercom and CO line calls (all calls will forward...

FEATURE USE 
CALL HOLDING (continued) EXCLUSIVE HOLD (continued) 
NOTE: NOTE: 
Regarding handsfree answerback, an intercom call must 
be answered by pressing the m button or lifting the 
handset before it can be placed on hold. 
TO HOLD/PARK A CALL AND PLACE ANOTHER CALL (CO 
line does not appear on your station) 
When a CO line is placed on Exclusive Hold, it may be 
picked up at another station by dialing a and the station 
number that placed the call on Exclusive Hold; however it 
cannot be picked up...