Toshiba Strata Dk24, Dk56, Dk96 Instruction Manual

PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECOROS 
SECTION 200-096-302 
FEBRUARY1991 
PROGRAM55 
LCR MODIFIED DIGITSTABLES 
PROGRAM 55-O LCR MODIFIED DIGITS - DELETE FROM FRONT 
/  
SELECT = Modified Digits 
FIGURE = Quantity of Digits 
Table I - 6 (six available) 
(00 - IO) to be deleted. 
PROGRAM 55-1 and 2 LCR MODIFIED DIGITS - ADD 
p-p--pj~~-~nn l ** p-p-j-p-l 
/7--l 
SELECT = Modified Digits Table (1 - 6) 
/ 
Enter 1 to add digits in front of number dialed 
Enter 2 to add digits at end of number...

PROGRAMMINGPROCEDURES-INSTRUCTIONWSYSTEMRECORDS 
SECTION 200-096-302 
FEBRUARY1991 
PROGRAM56 
LCRSTATIONGROUPASSIGNMENT 
SELECT = Port number(s) 
Enter port numbers of stations / 
being assigned. See Note 3 
for entering a range of ports. EnteJLCR station Group (I - 4) 
Port LCR Station Port LCR Station Port LCR Station 
Port LCR Station 
Number Grow No. (1 - 41 Number Grow No. (I - 41 Number Grow No. I1 - 4) Number Grauo No. (1 - 4) 
66 
67 
68 
69 
70 
71 
NOTES: 
1. For more information, see the...

,PROGRAMMiNG PROCEOUfI&lIiSfRUCTlO’NS/SYSTEM RECORDS 
SECTION 200-096-302 
FEBRUARY 1991 
This tab/e below shows the program options for st&iot% atWC0 lines for verified, forced and voluntary account code 
dialing. 1 
Account Code 
Dial Plan 
Verified (Forced) 
Verified (Voluntary) 
TABLE 2-B 
ACCOUNT CODE PROGRAM OPTION MATRIX 
Verified (Voluntary) 
Verified (Voluntary) 
Not Verified (Forced) 
Not Verified (Voluntary) 
Not Verified (Voluntary) 
Not Verified (Voluntary) Account Code 
Program Options 
._’...

PROGRAMMINGPROCEDURES-INSTRUCTIONWSYSTEMRECORDS 
SECTION 200-096-302 
FEBRUARY1991 
TABLE2-C 
OVERRIDE OPTION MATRIX 
Station B 
Button Options (Program 39) 
I No Yes On On On On 
NOTES: 
1. Station “A” attempts to override Executive or Privacy) Station “BY 
Id  2. Normally only one button . 
l ’ or m is assigned to a telephone (Program 39) depending on how it 
should operate with Privacy Override. 
3. Program 30, Key/LED 13 is turned “ON” for Station A, allowing Station A to have executive override to...

OPERATING PROCEDURES 
SECTION 200-096-400 
FEBRUARY1991 
Stra 
ta7-m~ 
OPERATING PROCEDURES  

OPERATING PROCEDURES 
SECTION 200-096-400 
FEBRUARY 1991 
TABLE of CONTENTS 
SUBJECT 
DIRECT STATION SELECTION CONSOLE 
STANDARD TELEPHONE 
ELECTRONIC TELEPHONE 
LIQUID CRYSTAL DISPLAY FEATURES ELECTRONIC TELEPHONE 
DIGITAL TELEPHONE 
LIQUID CRYSTAL DISPLAY FEATURES DIGITAL TELEPHONE  

DIRECT STATION 
SELECTION CONSOLE 
U S E R G U I D E 
STRATA” DK 
DIGITAL KEY 
TELEPHONE SYSTEMS 
STRATA 
DK24 
DK56 AND DK96 
RELEASE 
1, 2, & 3 
DIRECT STATION SELECTION 
CONSOLE USER GUIDE 
The Direct Station Selection console has been designed for use 
where the volume of incoming calls warrants a dedicated call 
forwarding location. 
Similar in shape and size to the electronic and digital telephone, 
the DSS console makes an attractive and easy-to-use compan- 
ion for the busy attendant. It features...

q LINE BUTTONS 
Provides direct access of individual CO lines for incoming and 
outgoing calls. In most cases, only those CO lines that cannot fit 
on the accompanying electronic telephone will be placed on the 
DSS. 
DIRECT STATION SELECTION m BUlTONILED 
Provides one-touch dialing to call another station. A dedicated 
button may be provided for each station up to the limits of the 
console(s). The associated LED displays the busy/idle status of 
the station. 
NIGHT TRANSFER BUTTON m 
Controls the...

DDSS/DSS CONSOLE CALL FORWARD 
OVERRIDE 
Calls to Forwarded stations will ring the dialed station and will not 
forward. This feature can be used to notify a person who forgets 
to deactivate the call forward feature after returning to the office. 
TO RING A FORWARDED STATION: 
Call that station from your dialpad and not the console’s m 
button assigned to that station. 
NOTE: 
This option may be reversed in system programming; i.e., 
m button calls will not forward and telephone dialpad 
calls will....

STRATA DK24 DSS Console Buttons 
STRATA DK56 and 96 DSS/DDSS 
Console Buttons 
I 
1 
Initialized DSS console button assignments for the DK24 sys- 
tem; assignments are flexible and may be changed by service 
personnel. 
I 
1 
Initialized DSSIDDSS console button assignments for the DK56 
and 96 systems; assignments are flexible and may be changed 
by service personnel. 
6