Toshiba Strata Dk24, Dk56, Dk96 Instruction Manual

SPEED DIAL MEMO DIRECTORY 
Speed Dial memos are limited to 12 characters for the memo (top 
row of LCD) and 16-digits/pauses for the dial number (bottom row 
of LCD). 
This directory is provided for recording Speed Dial numbers with 
memos. 
* Code: 12-Character Memo: (Example) 
* 
10 -MEMO HERE 
SPEED DIAL# HERE 
* 
* 
* 
 
* 
* * Code: 12-Character Memo: 
* 
35  

* Code: 12-Character Memo: * Code: 12-Character Memo: 
* 
1 
* 
* 
* 
* 
* 
 
* .- 
EE 
! 
* 
* 
* 
* 
* 
* 
* 
36  

INDEX 
* Code: 12-Character Memo: 
* 
* 
* 
* 
* 
* 
, Adding to a Preprogrammed Message ................................. 19 
Busy Field Display ................................................................ 16 
Busy Station Messaging ....................................................... 31 
Call Forward Display.. 
........................................................... 13 
Called Station Messaging ..................................................... 27 
Calling Station Messaging...

DIGITAL 
TELEPHONE 
U S E R G U I D E 
TABLE OF CONTENTS 
STRA 
D 
TE I 
:1 
TA@ DK 
GITAL KEY 
.EPHONE SYSTEMS 
STRATA DK24 
DK56 AND DK96 
RELEASE 3 GENERAL INFORMATION ...................................................... 1 
Button Descriptions.. ............................................................. 
2 
Volume Controls . .................................................................. 
6 
LED Indications .  . . .................................................................. 
8 
FEATURE...

TABLE OF CONTENTS (continued) 
Automatic Callback (Intercom) .............................................. 34 
Account Code Calls .............................................................. 36 
Paging ................................................................................... 38 
Door Phone.. ......................................................................... 39 
Handsfree Monitoring .......................................................... .40 
Alarm Reset...

GENERAL INFORMATION 
Toshiba digital telephones can access a wide range of useful 
features. This user guide provides brief, step-by-step instruc- 
tions for each of these features, which are activated by access 
codes or feature buttons. It is possible that your digital telephone 
cannot access all of the listed features; this is because feature 
accessibility is assigned on a phone-by-phone basis in system 
programming. 
Each digital telephone includes a dialpad, 26 feature buttons, 
and volume control...

GENERAL INFORMATION 
BU-ITON DESCRIPTIONS BUTTON DESCRIPTIONS (continued) 
CALL FORWARD-NO ANSWER BUTTON m 
Whenever the called station does not answer after either three 
rings or 12 seconds, whichever occurs first, this feature forwards 
calls to another station.  ACCOUNT CODE BUTTON B 
Allows a station user to enter a voluntary account code anytime 
during a CO line call without interrupting the conversation. 
ALARM RESET BUTTON m 
A station programmable option that will turn off the digital...

GENERAL INFORMATION 
BUTTON DESCRIPTIONS (continued) 
DO NOT DISTURB BUlTON m 
Locks the individual station in or out of the Do Not Disturb mode. 
DOOR LOCK BUTTON m 
Controls a door lock mechanism. 
FLASH BUTTON m 
Can be used to perform the following functions: Disconnect and 
recall dial tone on a CO line; access Centrex or PBX features; 
and enter a pause or flash signal when programming speed dial 
numbers. 
HOLD BUTTON m 
Holds internal or outside calls. 
INTERCOM BUTTON m 
Accesses an intercom...

GENERAL INFORMATION 
BUTTON DESCRIPTIONS (continued) 
SPEAKER BUTTON m 
Turns the speaker on/off. The speaker button will also select a 
CO or intercom line if programmed for auto preference in system 
programming. Also, used to disconnect when the handset is in 
the cradle. 
VOLUME CONTROLS (continued) 
SPEED DIAL BUTTON q 
Provides single-button speed dial of a personally assigned 
telephone number. 
SPEED DIAL (FIXED) BUTTON m 
This button dials a pre-assigned number or Centrex/PBX feature 
access...

GENERAL INFORMATION 
LED INDICATIONS 
CO INCOMING CALL 
A slow flash rate (i/2-sec. on-l/2-sec. off) indicates the CO/ 
PBX line on which the call is ringing.The line’s LED will be red on 
all stations with this button. 
CONFERENCE 
Avery fast flash rate (10 impulses per second (IPS)) indicates the 
CO line presently in the Conference mode. Other stations’ LEDs 
also show a steady (busy) indication for these lines. The line LED 
of the digital telephone that initiates the conference will be green. 
All...