Toshiba Strata Dk24, Dk56, Dk96 Instruction Manual

FEATURE USE 
CONFERENCE CALLS (continued) 
CALL FORWARD-BUSY/NO ANSWER (continued) 
TO SET CALL FORWARD-NO ANSWER 
1) Press the m button (or dial m 11 a). 
l CFNA LED flashes red (or hear confirmation tone). 
2) Dial the station number to which calls will forward 
’ 
l Listen for confirmation tone if B 1 u was dialed. 
3) Press the m (or m) button. 
l CFNA LED on steady. 
l Calls will forward to stored station number. 
TO CANCEL CALL FORWARD-NO ANSWER 
Press the m button (or dial m 11 B). 
l CFNA LED oes...

FEATURE USE 
CALL FORWARD-FIXED (continued) 
CALL HOLDING (continued) 
l CO line calls transferred to your station will forward. 
l Intercom calls will forward. 
l Call forward redirects the station hunt feature. 
l Call forward must be set before the call is received. 
FEATURE USE 
l Press a 
% 0 button with common appearance. 
l Press the button and dial I+ N (N = the holding 
station’s intercom number). 
l Press the m button and dial 1 0 + N (N = the 
holding CO line’s number-0 1 m 36). 
CALL HOLDING...

FEATURE USE 
CALL PICKUP (continued) 
NOTE: 
If am button is not available, press m + 1 instead of 
the m button. 
DO NOT DISTURB 
Allows you to prevent incoming calls from accessing your station. 
You can still make outgoing calls. 
TO USE DO NOT DISTURB MODE 
Press them button. 
l DND LED goes on steady red. 
TO RELEASE THE DO NOT DISTURB MODE 
Press the m button. 
l DND LED goes off. 
NOTES: 
1. Do Not Disturb prevents Off-hook Call Announce. 
2. Outside calls will mute ring your station while in the...

FEATURE USE 
FEATURE USE 
AUTOMATIC CALLBACK (INTERCOM) (continued) 
5) Dial the desired telephone number.* 
6) Hang up when the call is completed. 
NOTES: 
1. You may cancel the request at any time prior to the 
actual callback by 
11 (or press the A ressing them button and dialing 
$1 : button). 
2. If the original call was made using LCR (dial m, the 
telephone number is automatically dialed in step 4. 
3. If, after answering a callback, you hear a busy tone, it 
means the trunk has already been...

FEATURE USE 
ACCOUNT CODE CALLS (continued) PAGING (continued) 
TOADD,DELETE,ORCHANGEVERlFlEDACCOUNTCODES 
FROM STATIONS SELECTED IN SYSTEM PROGRAMMING 
1) Press m and dial the verified account code change ac- 
cess code Ci D 0 (see Note). 
l You will hear confirmation tone. 
2) Dial the three-digit verified account code number CI CI 0 
-  (000 - 299). 
3) Dial the verified account code CI . . . Q (1 * 15 digits). 
4) Press the 1 or m button to store the code. 
l You will hear confirmation tone. 
5)...

FEATURE USE FEATURE USE 
DOOR PHONE (continued) BACKGROUND MUSIC (BGM) (continued) 
TO USE A DOOR PHONE 
1) Press the button and then release it. 
l You hear a distinctive ringing tone. 
2) When answered, speak at a normal voice level in the 
direction of the door phone. 
HANDSFREE MONITORING 
Calls placed on hold by the distant party may be monitored 
handsfree. 
TO USE HANDSFREE MONITORING 
1) While connected to a call, press and hold the m 
button. 
2) Place the handset on-hook. 
3) Release the m...

FEATURE USE FEATURE USE 
42 DIRECT INWARD SYSTEM ACCESS (DISA) (continued) 
l If you receive busy tone or wish to dial another number 
while ringing the station, press the 1 button to receive 
dial tone, allowing another number to be dialed. 
TO CALL THROUGH YOUR SYSTEM ON AN OUTGOING CO 
LINE USING DISA 
1) Using a DTMF telephone, call the DISA CO line telephone 
number:-- 
2) Listen for the ringback tone signal, and then listen for the 
STRATA DKintercom dial tone’ (if busytone is received, try...

FEATURE USE 
FEATURE USE 
DIRECT STATION SELECTION BUTTONS (HOTLINE) 
PROGRAMMABLE OPTION (continued) 
busy) of that station. If connected to a CO line, pressing this 
button will put the party on hold. Transfer the call as you would 
normally, by voice announcing or camping on by hanging up. 
DOOR LOCK 
Pressing the m button momentarily activates a switch con- 
nected to a door lock or similar device. 
Door Lock Button 
DRLK 0 
DRLK 1 
DRLK 2 
DRLK 3 
DRLK 4 Location 
MESSAGE WAITING 
If someone calls...

FEATURE USE FEATURE USE 
MESSAGE WAITING (continued) 
has the message indication, and pressthe-buttontwice 
(or dial 1 I). 
TO CANCEL THE MESSAGE WAITING INDICATION SET ON 
YOUR TELEPHONE 
1) Answer the Message Waiting indication and receive the 
message. OVERRIDE CALLS 
NOTE: 
The called party must answer (off-hook or m 
button) for the message indication to be canceled. 
or . 
2) Press the B button (do not press the m button 
first). 
NOTE: 
If your telephone does not have a DXa button, the 
message...

FEATURE USE FEATURE USE 
MICROPHONE CONTROL (continued) SPEAKERPHONE (continued) 
4) Speak at a normal voice level in the direction of the 
telephone. 
5) Press the m button when the call is completed to 
disconnect. 
TO RECEIVE AN INCOMING CALL 
1,) You hear a ringing tone. 
2) Leave the handset on-hook. 
3) Press the w button next to the flashing red LED (CO 
Incoming Call rate). 
l CO LED flashes at the In-use rate. 
4) Speak at a normal voice level in the direction of the 
telephone. 
5) Press the m...