Toshiba Estudio 170f Manual

159
Enter the time period (start
time and end time) subject to
automatic activation using the
following keys.
To set Secure RX for the entire
24-hour-period for the day dis-
played, press:The following is displayed for 2
seconds.
Press 
STOP
 to return to the
Standby Mode.
Secure RX Activation Period Setting - continuedSet for Each Day
5
Complete the
Procedure
7
To move the entry
point to the left or
right.
To enter the
desired nu-
meric value
for each time
digit.
To change the time-
of-day forward or...

160This section describes the pro-
cedure to manually de-activate
Secure RX.
This function will permit you to
temporarily de-activate Secure
RX to printout documents re-
tained within memory.
NOTES:
• In order to manually de-
activate Secure RX, you
must first activate Secure
RX. (See page 158).
• If the Secure RX has been
set to ON, the facsimile
activates it automatically
after a document, which
has been stored in the
memory, is output.Press:
+
+
To temporarily de-activate Se-
cure RX, press:
Secure RX...

161
Press:
+
+
+
+
To set Memory Reception ON,
press: When the printer becomes unavailable during a document recep-
tion, due to a recording paper jam, toner empty or other error con-
dition, this facsimile backs up the received data by storing it in
memory.
The document data is received and stored in memory. The nature
of trouble is indicated on the LCD display with an ALARM lamp
blinking.
Display MEMORY
RX Menu
1
Select the Memory
Reception Option
2
To retrieve the data stored in memory, simply correct...

162This function allows the reduc-
tion of the received image, if
the received document is larger
than the recording paper.
To set RX Reduction to ON,
press:
Display the SET RX
REDUCTION Menu
1
Select the Desired
Option
2
Press:
+
+
+
+
Reception-Reduction Setting
Displayed for 2 seconds
Returns to display the SETUP
menu screen.COMPLETED
After completing this Configu-
ration Setting, you may con-
tinue to select other settings
referring to their associated
pages for instructions, or press
Select Another...

163
To set DISCARD function to
ON, press: This function allows up to 13
mm* of the lower portion of the
document to be discarded, if
the document is larger than the
recording paper.
* To change this predeter-
mined dimension, contact
your service representative.Press:
+
+
+
+
Display the
DISCARD Menu
1
Select the Desired
Option
2
Reception-Discard Setting
2.OFFDISCARD
1.ON
Displayed for 2 seconds
Returns to display the SETUP
menu screen.COMPLETED
After completing this Configu-
ration Setting, you may...

164
To set REVERSE ORDER
PRINT to ON, Press:
Reverse Order Printing Setting
This function receives the en-
tire facsimile document into
memory and then prints the
document in reverse order. In
this way, the pages of the doc-
ument will be in correct order.Press:
+
+
+
+
Display the
REVERSE ORDER
PRINT Menu
1
Select the Desired
Option
2
Displayed for 2 seconds
Returns to display the SETUP
menu screen.COMPLETED
After completing this Configu-
ration Setting, you may con-
tinue to select other settings...

165
Press:
+
+
+
+ This function prevents your
facsimile from receiving docu-
ments from unknown parties.
Transmissions to the e-
STUDIO170F are only possible
when the sending facsimile’s
terminal identification or tele-
phone number match those as-
signed to the Abbreviated Dial
Numbers or One Touch Dial
Keys on your facsimile.
NOTES:
• The default setting is OFF.
• Privileged Reception is ef-
fective only on incoming
calls received in the Auto
Receive Mode.
• Privileged Reception is not
available for...

166To clearly identify the time, date, and page count of your facsimile receptions, the e-STUDIO170F is
able to print a Reception Footer (RTI) on received documents using the e-STUDIO170F’s internal
clock.
Press:
+
+
+
+
NOTES:
• The Transmitting Station ID Number will only be provided if it is programmed in the remote
facsimile’s Terminal ID.
• The Receiving Station ID will only be provided if it is programmed in this facsimile’s Terminal
ID.
Display the RTI
Menu
1
Select the RTI Print option.
To print,...

167
This function prevents your
facsimile from sending to an
incorrectly dialed phone. With
this function set ON, the dialed
number will be checked against
the remote facsimile’s pro-
grammed Transmit Terminal ID
(TTI). The transmission will
only occur if the number dialed
matches the remote party’s
number.
You can turn the SECURITY
TX ON for a single transmis-
sion using this procedure.
NOTES:
• To change the default set-
ting of this function, refer
to page 148. The status
selection in this operation...

168
Press:
+
+
+
+Select “2.OFF” by pressing: If the ECM default setting is
set to ON, it is always effec-
tive for communications on
your facsimile (see page 60).
You can turn the ECM OFF for
a single transmission using
this procedure. The facsimile
will automatically return to its
default status immediately af-
ter that transmission is com-
plete.
NOTES:
• If ECM is set to “OFF” in
the default setting proce-
dure, this procedure is not
applicable and the fac-
simile will warn you with
an error message,...