Toshiba Estudio 170f Manual

169
This function attaches a sub-
address to the standard desti-
nation address in the event the
remote party requires one.
Three types of sub-addresses
can be used (SUB, SEP, and
PWD); or any combination of
two or three types can be
used. After selecting the de-
sired types, the transmission
to follow will be sent to the de-
sired address using the desig-
nated sub-address.
You can activate this option
while programming an Abbrevi-
ated Dial Number (page 66)  or
One Touch Dial Key (page 72)
if...

170Enter the required SEP ad-
dress (max. 20 digits), then
press:Enter the required PWD (max.
20 digits), then press:When the sub-address data
has been entered, the following
is displayed.Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods or you
may designate another option
at this point.
• One Touch Key Dialing
... See page 90
• Abbreviated Dialing
... See page 91
• Alphabet Dialing
... See page 92
• Keypad Dialing
... See page 93
Dialing with Sub-Address -...

171
Enabling or Disabling Send after Scan Temporarily
Load the Document
1
If the Send After Scan Mode
Default Setting is set to “OFF”,
this feature allows you enable
the Send After Scan mode for
a single transmission. Once
that transmission is complete,
the default status is regained.
If you enable Send after Scan,
you will be given the opportuni-
ty to select “SEND SCANNED
PAGES” or “CANCEL SEND-
ING.”
Select “SEND SCANNED
PAGES” if you want the pages
scanned to memory (prior to
the Memory Full) to be...

172Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods.
• One Touch Key Dialing
... See page 90
• Abbreviated Dialing
... See page 91
• Alphabet Dialing
... See page 92
• Keypad Dialing
... See page 93
Enter the Facsimile
Number
5Enabling or Disabling Send after Scan Temporarily - continued 

173
This function attaches a cover
sheet to the document to be
transmitted or prints the cover
sheet for confirmation purpos-
es.
Prior to using this cover sheet
feature, the Cover Sheet func-
tion must be set to ON. For
more information see  page
149.
NOTES:
• When sending multi-address
transmissions, the cover
sheet will be attached to the
document for every address.
• TTI will not be printed on the
cover sheet.
• Smart Batch is not available
if this function is used.
• When re-sending a docu-
ment due...

174Enter your name.
See page 37 for more informa-
tion on Character Entry.
Then press:Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods.
• One Touch Key Dialing
... See page 90
• Abbreviated Dialing
... See page 91
• Alphabet Dialing
... See page 92
• Keypad Dialing
... See page 93
FACSIMILE MESSAGE
                                                    JAN-31-2005
                               *** RE-TRANSMISSION ***
TO :  ABCDEFGHIJKLMNOPQRST...

175
Press:
+
+
+
+
Enter the time and day-of-
month to start the communica-
tion. This function is available to
reserve a document for trans-
mission at a programmed
time.
This function is convenient for
making use of non-peak dis-
count telephone rates for do-
mestic and overseas facsimile
transmissions. Delayed com-
munication can be applied to
Single Transmissions (to
transmit a single document to
a specified destination), Multi-
address (Group) Transmis-
sions, Mail Box Transmis-
sions, Relay...

176Priority Transmission permits
you to execute a transmission
before any other reserved
transmission job.
NOTES:
• Priority reservation is good
for a Single Transmission
only.
• Only one communication
can be reserved as a Pri-
ority Transmission.
When a transmission is
already reserved as a Pri-
ority Transmission, an er-
ror tone and “NOT AL-
LOWED NOW” LCD
prompt result when Priority
Transmission is selected.
• Priority Transmission is
invalid during Polling and
Mailbox communication.
Press:
+
+
+
+...

177
This operation is used to re-
send a document after the doc-
ument initially failed to be sent.
If recovery transmission is set
to ON, the document is stored
in the e-STUDIO170F for re-
sending.
NOTES:
• When the Recovery Trans-
mission is set to OFF, an
error tone and “NOT AL-
LOWED NOW” LCD
prompt result when Recov-
ery Transmission is se-
lected.
If there is no document
stored for recovery trans-
mission, an error tone
sounds and “NO ENTRY”
LCD prompt will be dis-
played.
• To change the default...

178To delete the selected docu-
ment stored for resending,
press:
Sending Recovery Transmission - continuedSelect the Cancel
Option
5
DELETEDDisplayed for 2 seconds
Returns to display the Standby
Mode screen.To retain the selected docu-
ment stored for resending,
press: