Sony Projector Vpl Vw12ht User Manual
Have a look at the manual Sony Projector Vpl Vw12ht User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 (GB) The INSTALL SETTING Menu The INSTALL SETTING menu is used for changing the install settings of the projector. KEYSTONE MEM ON: The DIGIT KEYSTONE setting is stored. The data is retrieved when the projector power is turned on. The setting will remain the same every time. OFF: The DIGIT KEYSTONE is reset to 0 when the power is turned on next time. DIGIT KEYSTONE Corrects the trapezoidal distortion caused by the projection angle. If the base edge of the image is longer, set a negative value; if the upper edge is longer, set a positive value to display the image as a rectangle. Note Only if “ZOOM,” “FULL,” or “NORMAL” has been selected in ASPECT of the INPUT SETTING menu, you can change the trapezoidal dimensions. The INSTALL SETTING Menu INSTALL SETTING KEYSTONE MEM:OFFDIGIT KEYSTONE:0INSTALLATION:FLOOR-FRONTCINEMA BLACK:ON LAMP TIMER: 234hINPUT-A INSTALLATION Set this item to reverse the picture horizontally or vertically. FLOOR-FRONT: The picture is not reversed. CEILING-FRONT: The picture is reversed horizontally and vertically. FLOOR-REAR: The picture is reversed horizontally. CEILING-REAR: The picture is reversed vertically. Note When using a mirror, be careful of how the installation is carried out since the picture may be reversed. CINEMA BLACK Switches the lamp wattage during projection. OFF: Normal wattage. ON: Enhances the black by reducing the lamp wattage. Notes •It will take a few seconds for the projector to change the lamp wattage during projection. •If the CINEMA BLACK is set to ON, it starts with OFF when the power is turned on, then changes to ON after a while. LAMP TIMER Indicates how long the lamp has been turned on. Note This only displays the time. You cannot alter the display.
32 (GB)
a: Distance between the screen and the center of the lens
b: Distance from the floor to the center of the lens
c: Distance from the floor to the foot of the projector
x: Free
16:9 Screen size (inches) 40 60 80 100 120 150 180 200 250 300
Minimum1260 1930 2600 3270 3930 4940 5940 6610 8270 9940
a(49 5/8)(76) (102 3/8)(128 7/8)(154 3/4)(194 5/8)(234) (260 3/8)(325 3/4)(391 1/2)
Maximum1470 2240 3010 3780 4550 5710 6860 7630 9560 11480
(58) (88 1/4)(118 5/32)(148 7/8)(179 1/4)(224 7/8)(270 1/8)(300 1/2)(376 1/2)(452 1/8)
bx–249 x–374 x–498 x–623 x–747 x–934 x–1121 x–1245 x–1556 x–1868
(x–9 7/8)(x–14 3/4)(x–19 5/8)(x–24 5/8)(x–29 1/2)(x–36 7/8)(x–44 1/4)(x–49 1/8)(x–61 3/8)(x–73 5/8)
cx–349 x–473 x–598 x–722 x–847 x–1033 x–1220 x–1345 x–1656 x–1967
(x–13 3/4)(x–18 5/8)(x–23 5/8)(x–28 1/2)(x–33 3/8)(x–40 3/4)(x–48 1/8)(x–53) (x–65 1/4)(x–77 1/2)
Unit: mm (inches)
To calculate the installation measurement (unit: mm)
SS: screen size diagonal (inches)
a (minimum) = {(SS × 44.22/1.3573) – 70.76208} × 1.025
a (maximum) = {(SS × 53.599173/1.3573) – 70.17171} × 0.975
Installation Example
Floor Installation
Installation Example
4:3 Screen size (inches) 40 60 80 100 120 150 180 200 250 300
Minimum1560 2380 3200 4020 4830 6060 7290 8100 10150 12190
a(61 1/2)(93 3/4)(126) (158 5/16)(190 1/4)(238 5/8)(287 1/8)(319) (399 3/4)(480)
Maximum1820 2760 3700 4650 5590 7000 8420 9360 11720 14070
(71 3/4)(108 3/4)(145 3/4)(183 1/8)(220 1/8)(275 5/8)(331 5/8)(368 5/8)(461 1/2)(554 1/8)
bx–305 x–457 x–610 x–762 x–915 x–1143 x–1372 x–1524 x–1905 x–2287
(x–12 1/8)(x–18) (x–24 1/8)(x–30) (x–36 1/8)(x–45) (x–54 1/8)(x–60) (x–75 1/8)(x–90 1/8)
cx–404 x–557 x–709 x–862 x–1014 x–1243 x–1471 x–1624 x–2005 x–2386
(x–16) (x–22) (x–28) (x–34) (x–40) (x–49) (x–58) (x–64) (x–79) (x–94)
a x
b
c
Distance between the front of the
cabinet and the center of the lens
Standard lens: 10 mm (
13/32 inches) Center of the lens Center of the screen Wall
Floor
To calculate the installation measurement (unit: mm)
SS: screen size diagonal (inches)
a (minimum) = {(SS × 44.22/1.1087) – 70.76208} × 1.025
a (maximum) = {(SS × 53.597384/1.1087) – 70.27214} × 0.975b = x – (SS/1.3573 × 8.45)
c = x – (SS/1.3573× 8.45 + 99.5)
Unit: mm (inches)
b = x – (SS/1.1087 × 8.45)
c = x – (SS/1.1087 × 8.45 + 99.5)
33 (GB)
16:9 Screen size (inches) 40 60 80 100 120 150 180 200 250 300
Minimum2500 3860 5210 6570 7930 9960 11990 13350 16740 20130
a(98 4/8)(151 7/8)(205 2/8)(258 6/8)(312 1/8)(392 2/8)(472 3/8)(525 6/8)(659 3/8)(792 5/8)
Maximum3750 5720 7700 9670 11650 14620 17580 19560 24500 29440
(147 4/8)(225 2/8)(303 2/8)(381) (458 7/8)(575 5/8)(692 2/8)(770 1/8)(964 5/8)(1159 2/8)
bx–249 x–374 x–498 x–623 x–747 x–934 x–1121 x–1245 x–1556 x–1868
(x–9 7/8)(x–14 3/4)(x–19 5/8)(x–24 5/8)(x–29 1/2)(x–36 7/8)(x–44 1/4)(x–49 1/8)(x–61 3/8)(x–73 5/8)
cx–349 x–473 x–598 x–722 x–847 x–1033 x–1220 x–1345 x–1656 x–1967
(x–13 3/4)(x–18 5/8)(x–23 5/8)(x–28 1/2)(x–33 3/8)(x–40 3/4)(x–48 1/8)(x–53) (x–65 1/4)(x–77 1/2)
Unit: mm (inches)
To calculate the installation measurements (unit: mm)
SS: screen size diagonal (inches)
a (minimum) = {(SS × 89.8220/1.3573) – 209.2626} × 1.025
a (maximum) = {(SS × 137.5601/1.3573) – 211.5915} × 0.975
4:3 Screen size (inches) 40 60 80 100 120 150 180 200 250 300
Minimum3110 4770 6430 8090 9750 12240 14730 16390 20550 24700
a(122 3/8)(187 6/8)(253 2/8)(318 5/8)(384) (482) (580) (645 5/8)(809) (972 5/8)
Maximum4630 7050 9470 11890 14310 17940 21570 23990 30040 36090
(182 4/8)(277 6/8)(373) (468 2/8)(563 4/8)(706 4/8)(849 3/8)(944 5/8)(1182 6/8)(1421)
bx–305 x–457 x–610 x–762 x–915 x–1143 x–1372 x–1524 x–1905 x–2287
(x–12 1/8)(x–18) (x–24 1/8)(x–30) (x–36 1/8)(x–45) (x–54 1/8)(x–60) (x–75 1/8)(x–90 1/8)
cx–404 x–557 x–709 x–862 x–1014 x–1243 x–1471 x–1624 x–2005 x–2386
(x–16) (x–22) (x–28) (x–34) (x–40) (x–49) (x–58) (x–64) (x–79) (x–94)
To calculate the installation measurements (unit: mm)
SS: screen size diagonal (inches)
a (minimum) = {(SS × 89.8220/1.1087) – 209.2626} × 1.025
a (maximum) = {(SS × 137.5601/1.1087) – 211.5915} × 0.975b = x – (SS/1.3573 × 8.45)
c = x – (SS/1.3573 × 8.45 + 99.5)
Unit: mm (inches)
b = x – (SS/1.1087 × 8.45)
c = x – (SS/1.1087 × 8.45 + 99.5) When you install the projector on a desk, etc., and you are using the VPLL-ZM101 or VPLL-ZM31 Projection
Lens, see the following chart for the appropriate installation measurements.
About lens attachment
Attaching the lens may cause fire or injury to the person. Users should request qualified Sony representative to
attach the lens.
For the VPLL-ZM101 Projection Lens
Installation
Installation Example
34 (GB)
16:9 Screen size (inches) 40 60 80 100 120 150 180 200 250 300
Minimum1140 1770 2400 3030 3660 4610 5560 6190 7760 9340
a(45) (69 6/8)(94 5/8)(119 4/8)(144 3/8)(181 5/8)(218 7/8)(243 5/8)(305 6/8)(367 6/8)
Maximum1210 1860 2520 3180 3840 4830 5810 6470 8120 9760
(47 4/8)(73 4/8)(99 3/8)(125 3/8)(151 2/8)(190 1/8)(229) (254 7/8)(319 6/8)(384 4/8)
bx–249 x–374 x–498 x–623 x–747 x–934 x–1121 x–1245 x–1556 x–1868
(x–9 7/8)(x–14 3/4)(x–19 5/8)(x–24 5/8)(x–29 1/2)(x–36 7/8)(x–44 1/4)(x–49 1/8)(x–61 3/8)(x–73 5/8)
cx–349 x–473 x–598 x–722 x–847 x–1033 x–1220 x–1345 x–1656 x–1967
(x–13 3/4)(x–18 5/8)(x–23 5/8)(x–28 1/2)(x–33 3/8)(x–40 3/4)(x–48 1/8)(x–53) (x–65 1/4)(x–77 1/2)
Unit: mm (inches)
To calculate the installation measurements (unit: mm)
SS: screen size diagonal (inches)
a (minimum) = {(SS × 41.75/1.3573) – 116.2604} × 1.025
a (maximum) = {(SS × 45.8210/1.3573) – 112.9154} × 0.975
4:3 Screen size (inches) 40 60 80 100 120 150 180 200 250 300
Minimum1420 2200 2970 3740 4510 5670 6830 7600 9530 11460
a(56 1/8)(86 5/8)(117) (147 3/8)(177 6/8)(223 3/8)(269) (299 3/8)(375 3/8)(451 2/8)
Maximum1500 2310 3110 3920 4730 5930 7140 7950 9960 11980
(59 2/8)(91) (122 5/8)(154 3/8)(186 1/8)(233 6/8)(281 3/8)(313) (392 3/8)(471 6/8)
bx–305 x–457 x–610 x–762 x–915 x–1143 x–1372 x–1524 x–1905 x–2287
(x–12 1/8)(x–18) (x–24 1/8)(x–30) (x–36 1/8)(x–45) (x–54 1/8)(x–60) (x–75 1/8)(x–90 1/8)
cx–404 x–557 x–709 x–862 x–1014 x–1243 x–1471 x–1624 x–2005 x–2386
(x–16) (x–22) (x–28) (x–34) (x–40) (x–49) (x–58) (x–64) (x–79) (x–94)
To calculate the installation measurements (unit: mm)
SS: screen size diagonal (inches)
a (minimum) = {(SS × 41.75/1.1087) – 116.2604} × 1.025
a (maximum) = {(SS × 45.8210/1.1087) – 112.9154} × 0.975b = x – (SS/1.3573 × 8.45)
c = x – (SS/1.3573 × 8.45 + 99.5)
Unit: mm (inches)
b = x – (SS/1.1087 × 8.45)
c = x – (SS/1.1087 × 8.45 + 99.5)
For the VPLL-ZM31 Projection Lens
Installation Example
35 (GB)
Ceiling Installation
When installing the projector on the ceiling, use the
PSS-610 Projector Suspension Support.
a: Distance between the screen and the center of the lens
b: Distance between the ceiling and the center of the lens
x: Distance between the ceiling and the center of the screenPSS-610 Projector Suspension Support
(not supplied)
For ceiling installation, consult with qualified Sony
personnel.
Installation Example
a
xb
Center of the lensCeiling
Center of the screen
Distance between the front of
the cabinet and the center of
the lens
Standard lens:
10 mm (
13/32 inches)
Wall
16:9 Screen size (inches) 80 100 120 150 180 200 250 300
Minimum2600 3270 3930 4940 5940 6610 8270 9940
a(102 3/8)(128 7/8)(154 3/4)(194 5/8)(234) (260 3/8)(325 3/4)(391 1/2)
Maximum3010 3780 4550 5710 6860 7630 9560 11480
(118 5/32)(148 7/8)(179 1/4)(224 7/8)(270 1/8)(300 1/2)(376 1/2)(452 1/8)
xb+498 b+623 b+747 b+934 b+1121 b+1245 b+1556 b+1868(b+19 5/8)(b+24 5/8)(b+29 1/2)(b+36 7/8)(b+44 1/4)(b+49 1/8)(b+61 3/8)(b+73 5/8)
b247/272/297/347/372/397 mm (9 3/4/10 3/4/11 3/4/13 3/4/14 3/4/15 3/4 inches) adjustable when using PSS-610
Unit: mm (inches)
To calculate the installation measurements (unit: mm)
SS: screen size diagonal (inches)
a (minimum) = {(SS × 44.22/1.3573) – 70.76208} × 1.025
a (maximum) = {(SS × 53.599173/1.3573) – 70.17171} × 0.975
x = b + (SS/1.3573 × 8.45)
4:3 Screen size (inches) 80 100 120 150 180 200 250 300
Minimum3200 4020 4830 6060 7290 8100 10150 12190
a(126) (158 5/16)(190 1/4)(238 5/8)(287 1/8)(319) (399 3/4)(480)
Maximum3700 4650 5590 7000 8420 9360 11720 14070
(145 3/4)(183 1/8)(220 1/8)(275 5/8)(331 5/8)(368 5/8)(461 1/2)(554 1/8)
xb+610 b+762 b+915 b+1143 b+1372 b+1524 b+1905 b+2287(b+24 1/8)(b+30) (b+36 1/8)(b+45) (b+54 1/8)(b+60) (b+75 1/8)(b+90 1/8)
b247/272/297/347/372/397 mm (9 3/4/10 3/4/11 3/4/13 3/4/14 3/4/15 3/4 inches) adjustable when using PSS-610
To calculate the installation measurements (unit: mm)
SS: screen size diagonal (inches)
a (minimum) = {(SS × 44.22/1.1087) – 70.76208} × 1.025
a (maximum) = {(SS × 53.597384/1.1087) – 70.27214} × 0.975
x = b + (SS/1.1087 × 8.45)
Unit: mm (inches)
36 (GB)
When you install the projector on the ceiling, and you are using the VPLL-ZM101 or VPLL-ZM31 Projection
Lens, see the following chart for the appropriate installation measurements.
About lens attachment
Attaching the lens may cause fire or injury to the person. Users should request qualified Sony representative to
attach the lens.
For the VPLL-ZM101 Projection Lens
16:9 Screen size (inches) 80 100 120 150 180 200 250 300
Minimum5210 6570 7930 9960 11990 13350 16740 20130
a(205 2/8)(258 6/8)(312 1/8)(392 2/8)(472 3/8)(525 6/8)(659 3/8)(792 5/8)
Maximum7700 9670 11650 14620 17580 19560 24500 29440
(303 2/8)(381) (458 7/8)(575 5/8)(692 2/8)(770 1/8)(964 5/8)(1159 2/8)
xb+498 b+623 b+747 b+934 b+1121 b+1245 b+1556 b+1868(b+19 5/8)(b+24 5/8)(b+29 1/2)(b+36 7/8)(b+44 1/4)(b+49 1/8)(b+61 3/8)(b+73 5/8)
b247/272/297/347/372/397 mm (9 3/4/10 3/4/11 3/4/13 3/4/14 3/4/15 3/4 inches) adjustable when using PSS-610
Unit: mm (inches)
To calculate the installation measurements (unit: mm)
SS: screen size diagonal (inches)
a (minimum) = {(SS × 89.8220/1.3573) – 209.2626} × 1.025
a (maximum) = {(SS × 137.5601/1.3573) – 211.5915} × 0.975
x = b + (SS/1.3573 × 8.45)
4:3 Screen size (inches) 80 100 120 150 180 200 250 300
Minimum6430 8090 9750 12240 14730 16390 20550 24700
a(253 2/8)(318 5/8)(384) (482) (580) (645 5/8)(809) (972 5/8)
Maximum9470 11890 14310 17940 21570 23990 30040 36090
(373) (468 2/8)(563 4/8)(706 4/8)(849 3/8)(944 5/8)(1182 6/8)(1421)
xb+610 b+762 b+915 b+1143 b+1372 b+1524 b+1905 b+2287(b+24 1/8)(b+30) (b+36 1/8)(b+45) (b+54 1/8)(b+60) (b+75 1/8)(b+90 1/8)
b247/272/297/347/372/397 mm (9 3/4/10 3/4/11 3/4/13 3/4/14 3/4/15 3/4 inches) adjustable when using PSS-610
To calculate the installation measurements (unit: mm)
SS: screen size diagonal (inches)
a (minimum) = {(SS × 89.8220/1.1087) – 209.2626} × 1.025
a (maximum) = {(SS × 137.5601/1.1087) – 211.5915} × 0.975
x = b + (SS/1.1087 × 8.45)
Unit: mm (inches)
Installation Example
37 (GB)
For the VPLL-ZM31 Projection Lens
16:9 Screen size (inches) 80 100 120 150 180 200 250 300
Minimum2400 3030 3660 4610 5560 6190 7760 9340
a(94 5/8)(119 4/8)(144 3/8)(181 5/8)(218 7/8)(243 5/8)(305 6/8)(367 6/8)
Maximum2520 3180 3840 4830 5810 6470 8120 9760
(99 3/8)(125 3/8)(151 2/8)(190 1/8)(229) (254 7/8)(319 6/8)(384 4/8)
xb+498 b+623 b+747 b+934 b+1121 b+1245 b+1556 b+1868(b+19 5/8)(b+24 5/8)(b+29 1/2)(b+36 7/8)(b+44 1/4)(b+49 1/8)(b+61 3/8)(b+73 5/8)
b247/272/297/347/372/397 mm (9 3/4/10 3/4/11 3/4/13 3/4/14 3/4/15 3/4 inches) adjustable when using PSS-610
Unit: mm (inches)
To calculate the installation measurements (unit: mm)
SS: screen size diagonal (inches)
a (minimum) = {(SS × 41.75/1.3573) – 116.2604} × 1.025
a (maximum) = {(SS × 45.8210/1.3573) – 112.9154} × 0.975
x = b + (SS/1.3573 × 8.45)
4:3 Screen size (inches) 80 100 120 150 180 200 250 300
Minimum2970 3740 4510 5670 6830 7600 9530 11460
a(117) (147 3/8)(177 6/8)(223 3/8)(269) (299 3/8)(375 3/8)(451 2/8)
Maximum3110 3920 4730 5930 7140 7950 9960 11980
(122 5/8)(154 3/8)(186 1/8)(233 6/8)(281 3/8)(313) (392 3/8)(471 6/8)
xb+610 b+762 b+915 b+1143 b+1372 b+1524 b+1905 b+2287(b+24 1/8)(b+30) (b+36 1/8)(b+45) (b+54 1/8)(b+60) (b+75 1/8)(b+90 1/8)
b247/272/297/347/372/397 mm (9 3/4/10 3/4/11 3/4/13 3/4/14 3/4/15 3/4 inches) adjustable when using PSS-610
To calculate the installation measurements (unit: mm)
SS: screen size diagonal (inches)
a (minimum) = {(SS × 41.75/1.1087) – 116.2604} × 1.025
a (maximum) = {(SS × 45.8210/1.1087) – 112.9154} × 0.975
x = b + (SS/1.1087 × 8.45)
Unit: mm (inches)
Installation Example
38 (GB) Attaching the projector suspension support PSS-610 When installing the projector on the ceiling, use the PSS-610 Projector Suspension Support. For more details on the ceiling installation, refer to theInstallation manual for Dealers of the PSS-610. The installation measurements are shown below when you install the projector on the ceiling. Installation diagram Top view Align the center of the lens with the center of the screen. Front of the cabinet Distance between the screen and the center of the lens Center of the unit Center of the screenCenter of the lens Center of the supporting pole (The center of the supporting pole is different from that of the unit.)Upper ceiling mount bracket Front view The lens is offset 40 mm (1 9/16 inch) to the left from the center of the supporting pole. When mounting, take care to align the center of the lens with the center of the screen; not the center of the supporting pole. Center of the supporting poleCenter of the unitThe bottom surface of the mount bracket Distance between the ceiling and the surface of the mount bracket Using adjustment pipe (b): 150/175/200 mm (6/7/7 7/8 inches) Using adjustment pipe (c): 250/275/300 mm (9 7/8/10 7/8/11 7/8 inches) Ceiling Side view Unit: mm (inches) Rear of the lens Front of the lens Installation Example 208.5 (8 7/32) 126.3 (4 31/32)216.6 (8 17/32) 157.5 (6 3/16) 40 (1 9/16) 125 (4 29/32) 96.5 (3 13/16) 250 (9 27/32) 157.5 (6 3/16)40 (1 9/16) 208.5 (8 7/32) 198.4 (7 13/16) 126.3 (4 31/32)216.6 (8 17/32) 219.6 (8 21/32) Unit: mm (inches) Center of the lensFront of the cabinet
39 (GB) Notes on Installation Notes on Installation Unsuitable Installation Do not install the projector in the following situations. These installations may cause malfunction or damage to the projector. Poorly ventilated •Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation holes. When internal heat builds up due to blockage of the ventilation holes, the temperature sensor may function, with the message “High Temp.! Lamp off in 1 min.” displayed. At that point, the power may be turned off automatically after one minute. •Leave space of more than 30 cm (11 7/8 inches) around the unit. •Be careful that the ventilation holes do not inhale tiny objects such as pieces of paper. •If you put something in front of the front ventilation holes, the exhaust may be inhaled into the projector through the ventilation holes at the bottom, causing the internal temperature to rise, which activates the protection circuit. Install the projector so that the exhaust is not blocked. Highly heated and humid •Avoid installing the unit in a location where the temperature or humidity is very high, or the temperature is very low. •To avoid moisture condensation, do not install the unit in a location where the temperature may rise rapidly. Very dusty Avoid installing the unit in a location where there is a lot of dust; otherwise, the air filter will clog. The dust blocking the air through the filter may cause the internal heat level of the projector to rise. Replace it with a new one periodically. Unsuitable Conditions for Use Do not do any of the following. Standing on its side Avoid using the unit standing on its side. This may cause a malfunction. Tilting front/rear and right/left Avoid using as the unit tilted at an angle of more than 20 degrees. Do not install the unit other than on a level surface or on the ceiling. Installation of the unit improperly may cause a malfunction. � � 20° 20° 20° 20° 20°
40 (GB) Notes on Installation Blocking the ventilation holes Avoid using something that covers over the ventilation holes; otherwise, the internal heat level may build up.