Sony Klv 30hr3 Operating Instructions
Have a look at the manual Sony Klv 30hr3 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
12Overview & Installation Overview of the TV indicators Inserting Batteries into the Remote Control Make sure you insert the supplied batteries using the correct polarities. Always remember to dispose of used batteries in an environmental friendly way. To operate the remote control, point it towards this receiver.Lights up in green when the TV is switched on. • Lights up in red when the TV is in standby mode. • Flashes red when a button is pressed on the remote control. • Lights up in red when the sleep timer is set. For more details, refer to “Sleep Timer” on page 27. SONY CORPORATION JAPAN/4 S O N Y C O R PO R A TIO N JA P AN /4
13 GB Overview & Installation Removing the Rear Cover When you connect the cables, remove the rear cover of the TV set. Be sure to attach the rear cover back on the TV set after you finish connecting the cables. Removing the rear cover Hold the rear cover as illustrated below and pull off one side of the lower part of the cover towards you first. Then, detach the upper part of the cover from the TV set. Attaching the rear coverHold the rear cover as illustrated below, fitting the four detents on the rear cover into the corresponding holes on the TV set, then push the rear cover back on to the TV set. It is not necessary to attach the rear cover if you install a wall-mount bracket SU-LW1 (optional accessory).
14 Connecting the Aerial and VCR or VCR Overview & Installation Make sure to connect the aerial before the Scart. For more details regarding VCR connection, refer to “Connecting Equipment to the TV” on page 29.
15 GB 1 Connect the TV plug to the mains socket (220-240V AC, 50Hz). 2The first time that the TV set is connected, it is usually turned on. If the TV is off, press the on/off button to turn on the TV. The first time you switch on the TV, a Language menu appears automatically on the TV screen. 3Press the V, v, B or b buttons on the remote control to select your language, then press the OK button to confirm your selection. From now on all the menus will appear in your chosen language. 4The Country menu appears automatically. Press the v or V button to select the country in which you are using the TV. Press the OK button to confirm your selection. • If the country in which you want to use the TV set does not appear in the list, select “-” instead of a country. • To avoid wrong teletext characters for cyrillic languages we recommend selecting Russia if your own country does not appear in the list. First Time Operation Switching On the TV and Automatically Tuning The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen 2) choose the country in which you are going to operate the TV, 3) search and store all available channels (TV Broadcast) and 4) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in the (Set Up menu) or by pressing and holding the Auto Start Up button on the top of TV set for more than three seconds, see page 11. First Time Operation Country Select country United Kingdom Ireland Nederland België/Belgique Luxembourg France Italia Schweiz/Suisse/Svizzera Deutschland Österreich continued...
16 5 The Auto Tuning menu appears on the screen. Press the OK button to select Yes. 6The TV starts to automatically search and store all available broadcast channels for you. This procedure could take some minutes. Please be patient and do not press any buttons, otherwise automatic tuning will not be completed. If no channels were found during the auto tune process, a message appears automatically on the screen asking you to connect the aerial. Check the aerial connection (refer to page 14). Press the OK button to restart the auto tuning process. 7After all available channels are captured and stored, the Programme Sorting menu automatically appears on the screen enabling you to change the order in which the channels are stored. a)If you wish to keep the broadcast channels in the tuned order, go to step 8. b)If you wish to store the channels in a different order: 1Press the v or V button to select the programme number with the channel (TV Broadcast) you wish to move. Press the b button. 2Press the v or V button to select the new programme number position for your selected channel (TV Broadcast). Press the OK button to store The selected channel now moves to its new programme position. 3Repeat steps b)1 and b)2 if you wish to change the order of the other channels. 8 Press the MENU button to remove the menu from the screen Auto tuning Programmes found: No channel found. Please connect aerial Confirm Programme Sorting Exit:MENU 01 02 03 04 05 06 07 08 09 10 11TVE TVE2 TV3 C33 C27 C58 S02 S06 C44 C47 C48 Programme Sorting Exit:MENU 01 02 03 0405 06 07 08 09 10 11TVE TVE2TV3 C33C27 C58 S02 S06 C44 C47 C4801 TVE Do you want to start automatic tuning? Ye sNo Your TV set is now ready for use First Time Operation
17 GB TV Functions Introducing and Using the Menu System Your TV set uses an On-Screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: 1To switch on the menu screens: Press the MENU button to switch the first level menu on. Picture AdjustmentPicture Mode Contrast Brightness Colour Sharpness Backlight Reset Noise Reduction Colour Tone Select:Set:OKEnd:MENU Personal 80 50 50 50 70 Auto Normal TV Functions 2To navigate through the menus: • To highlight and select the desired menu or option, press v or V. • To enter the selected menu or option, press b. • To return to the last menu or option, press B. • To alter the settings of your selected option, press v/V/B or b. • To confirm and store your selection, press OK. 3To switch off the menu screens: Press the MENU button to remove the menu from the screen.
18 The Picture Adjustment Menu The “Picture Adjustment” menu allows you to alter the picture settings. To do this: Press the MENU button and then press OK to enter this menu. Next, press v or V to select the desired option and press OK. Finally, read below how to operate into each option. Picture Mode This option allows you to customise the picture mode based on the programme you are watching. After selecting this option press OK. Next, press repeatedly v or V to select: Live (for live broadcast programmes, DVD and Digital Set Top Box receivers). Personal (for individual settings). Movie (for films). Once you have selected your desired option, press OK to store. Brightness, Colour, Sharpness and Backlight level of Live and Movie mode are fixed on the factory to get the best picture quality. ContrastPress B or b to reduce or enhance picture contrast. Next, press OK to store. BrightnessPress B or b to darken or brighten the picture. Next, press OK to store. This option only appears and can only be adjusted if “Picture Mode” is set to “Personal”. ColourPress B or b to decrease or to increase color intensity. Next press OK to store. This option only appears and can only be adjusted if “Picture Mode” is set to “Personal”. HuePress B or b to decrease or to increase the green tones. Next press OK to store. This option only appears for NTSC signal (e.g. USA video tapes). SharpnessPress B or b to soften or to sharpen the picture. Next press OK to store. This option only appears and can only be adjusted if “Picture Mode” is set to “Personal”. BacklightPress B or b to darken or brighten the backlight. This option only appears and can only be adjusted if “Picture Mode” is set to “Personal”. TV Functions , Picture AdjustmentPicture Mode Contrast Brightness Colour Sharpness Backlight Reset Noise Reduction Colour Tone Select:Set:OKEnd:MENU Personal 80 50 50 50 70 Auto Normal Picture AdjustmentPersonal 80 50 50 50 70 Auto Normal Picture Mode Contrast Brightness Colour Sharpness Backlight Reset Noise Reduction Colour Tone Select:Set:OKEnd:MENUBack:
19 GB ResetPress OK to reset the picture to the factory preset levels. Noise This option is set to Auto to automatically reduce the snowy picture visible in the weak broadcast Reduction signal. However, it can be modified. After selecting this option press b. Next, press v or V to select Off. Finally, press OK to store. Colour ToneThis option allows you to alter the tint of the picture. After selecting this option press b. Next, press repeatedly v or V to select: Warm (gives the white colours a red tint), Normal (gives the white colours a neutral tint), Cool (gives the white colours a blue tint). Finally press OK to store. TV Functions
20 The Sound Adjustment Menu The “Sound Adjustment” menu allows you to alter the sound settings. To do this: Press the MENU button and press v to select , then press OK to enter this menu. Next, press v or V to select the desired option and press OK. Finally, read below how to operate into each option. SoundThis option allows you to customise the sound effect. After selecting this Effectoption press OK. Next, press repeatedly v or V to select: NaturalEnhances clarity, detail and presence of sound by using “BBE High Definition Sound system”*. Dynamic“BBE High Definition Sound system”* intensifies clarity and presence of sound for better intelligibility and musical realism. OffFlat response. Once you have selected your desired option, press OK to store. This function has no effect on headphones sound. TreblePress B or b to decrease or to increase higher-frequency sounds. Next, press OK to store. BassPress B or b to decrease or to increase the lower-frequency sounds. Next, press OK to store. BalancePress B or b to emphasise the left or the right speaker. Next, press OK to store. ResetPress OK to reset the sound to the factory preset levels. Dual Press b. Next: Sound• For a Stereo broadcast: Press v or V to select Stereo or Mono. Next press OK to store. • For a bilingual broadcast: Press v or V to select Mono (for mono channel if available), A (for channel 1) or B (for channel 2). Next press OK to store. Auto Press b. Next press v or V to select On (the volume level of the channels will Volumestay the same, independent of the broadcast signal, e.g. in the case of advertisements) or Off (the volume level changes according to the broadcast signal). Next press OK to store. This function has no effect on headphones sound. * The “BBE High Definition Sound system” is manufactured by Sony Corporation under license from BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866. The word “BBE” and BBE Symbol are trademarks of BBE Sound, Inc. TV Functions , m Picture AdjustmentPicture Mode Contrast Brightness Colour Sharpness Backlight Reset Noise Reduction Colour Tone Select:Set:OKEnd:MENU Personal 80 50 50 50 70 Auto Normal Sound Effect Treble Bass Balance Reset Dual Sound Auto VolumeNatural 0 0 0 Stereo OffSound Adjustment Select:Set:OKEnd:MENU Sound AdjustmentSound Effect Treble Bass Balance Reset Dual Sound Auto VolumeNatural 0 0 0 Stereo Off Select:Set:OKEnd:MENUBack:
21 GB The Features Menu The “Features” menu allows you to alter various settings of the TV. To do this: Press the MENU button and press v twice to select , then press OK to enter this menu. Next, press v or V to select the desired option and press OK. Finally, read below how to operate into each option. POWER SAVING This option allows you to reduce the power consumption of this TV. To d o t h i s : After selecting the option, press OK. Then, press v or V to select Reduce. Next, press OK to store. AUTO FORMAT This option allows you to automatically change the aspect ratio of the screen. To do this: After selecting the option, press OK. Then, press v or V to select On (if you wish the TV set to automatically switch the screen format according to the broadcast signal) or Off (if you wish to keep your preference). Finally, press OK to store. Even if you have selected “On” or “Off”, you can always modify the format of the screen by pressing repeatedly on the remote control to select one of the following formats: SMART:Imitation of wide screen effect for 4:3 broadcast. 4:3:Conventional 4:3 picture size, full picture information. 14:9:Compromise between 4:3 and 16:9 picture size. ZOOM:Widescreen format for letterbox movies. WIDE:For 16:9 broadcast. Full picture information. • In “SMART”, “ZOOM” and “14/9” modes, parts of the top and bottom of the screen are cut off. Press v or V to adjust the position of the image on the screen (e.g. to read subtitles). • According to the format of diffussion, black bands can always appear whatever the selected mode. TV Functions , m Picture AdjustmentPicture Mode Contrast Brightness Colour Sharpness Backlight Reset Noise Reduction Colour Tone Select:Set:OKEnd:MENU Personal 80 50 50 50 70 Auto Normal Power Saving Auto Format AV2 Output TV Speakers RGB CenterStandard Off Auto On 0Features Select:Set:OKEnd:MENU FeaturesPower Saving Auto Format AV2 Output TV Speakers RGB CenterStandard Off Auto On 0 Select:Set:OKEnd:MENUBack: 4:3 ZOOM 14:9 WIDE SMART continued...