Singer Serger Professional 5 Manual
Have a look at the manual Singer Serger Professional 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 50 Singer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
4. Turn the hand wheel toward you until the Chainstitch Looper extends out
10mm (approximately ½”) from the needle plate edge.
5. Thread the looper area of the ma chine following the brown color-coded
thread guides 4-11. Us e the tweezers provided in the accessory case to
aid in threading the looper.
6. Place the thread through threading guide f and g.
7. Continue threading guides h, i , j and k.
8. Thread the looper eye (A ) from front to back.
Pull about 4 inc hes of thread through the
looper. Position the thread into the V cutout
(B) on the threader. Firmly hold the thread
tail with your left hand and pull threader
lever (C) up into plac e (D). Gently pull 5-6”
of thread to the back of the machine.
Double Chain Stitch page 7
“V” cutout
Threader lever
5. Continue to thread points 4-8. Slip the thread into the middle slot of the
thread guide g. Go over the take up lever h. Continue by slipping the
thread into the middle slot of the thread guides i and j.
6. Before threading the eye of the needle, make sure the thread is in front
of
the thread guide located on the bottom of the needle clamp for the Cover
Stitch or Chainstitch.
7. Thread the eye of the Middle Cover Needle k.
8. Draw about 4 inches of the thr ead through the needle eye towards the back
of the machine.
9. Place the thread to the back, under the Presser F oot. Lower foot and sew.
4
5
7
8
Double Chain Stitch page 9
6
Chapter 2:
Two-Thread Wrapped Edge
Overlock (narrow and wide)