Singer Serger Professional 5 Manual
Have a look at the manual Singer Serger Professional 5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 50 Singer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
4. Turn the hand wheel toward you until the Chainstitch Looper extends out
10mm (approximately ½ inch) from the needle plate edge.
5. Thread the looper area of the ma chine following the brown color-coded
thread guides 4-11. Us e the tweezers provided in the accessory case to
aid in threading the looper.
6. Place the thread through threading guide f and g.
7. Continue threading
guides h, i , j and k.
8. Thread the looper eye (A) from front to back. Pull about 4 inches of thread
through the looper. Position the thread into the V cutout (B) on the threader.
Firmly hold the thread tail with your left hand and pull threader lever (C) up
into place (D). Gently pull 5-6” of thread to the back of the machine.
Cover Hem Wide page 7
“V” cutout
Threader Lever
5. Continue to thread point s 4-8. Slip the thread into the middle slot of the
thread guide g. Go over the take up lever h. Continue by slipping the
thread into the middle slot of the thread guides i and j.
6. Before threading the eye of the needle, make sure the thread is in front
of
the thread guide located on the bottom of the needle clamp.
7. Thread the eye of the Ri ght Cover Stitch Needle k.
8. Draw about 4 inches of the thr ead through the needle eye towards the back
of the machine.
9. Place the thread to the back, under the Presse r Foot. Lower foot and sew.
Cover Hem Wide page 9
5. Continue to thread point s 4-8. Slip the thread into the front slot of the
thread guide g. Go over the take up lever h. Continue by slipping the
thread into the left sl ots of the thread guides i and j.
6. Before threading the eye of the needle, make sure the thread is in front
of
the thread guide located on the bottom of the needle clamp.
7. Thread the eye of the Left Cover Stitch Needle k.
8. Draw about 4 inches of the thr ead through the needle eye towards the back
of the machine.
9. Place the thread to the back, under the Presser F oot. Lower foot and sew.
Cover Hem Wide page 11
Triple Cover Hem
This innovative stitch provides a very wi de 5.6 mm professional and creative triple
topstitch to sewing projects . Three needles create parallel rows of topstitching and
one looper sews an edge finish on the under neath side. This is ideal for heavier
fabrics traditionally used in home decorating. It also adds a unique accent for
garment construction. In addition to sewing on woven fabrics, the Triple Cover Hem
makes a beautiful topstitch and a strong hem on st retch fabrics. This stitch emulates
hem finishing as seen on r eady-to-wear garments.
:
Triple Cover Hem page 1
ATD:
Auto Tension Dial
“J”
Left Cover Stitch
Needle “C” (Orange) Threaded
Middle Cover Stitch Nee-
dle “D” (Blue) Threaded
Right Cover Stitch
Needle “E” (Green) Threaded
Upper Looper
Looper Disengaged
and Not Threaded
Lower Looper
Not Threaded
Chain Stitch Looper
(Brown) Threaded
Upper Looper Clutch “C”
Upper Knife Non-working
Position
Seam Guide Plate Installed
Seam Width Dial “N”
Stitch Length Dial “N”
Presser Foot
Pressure “N”
Differential Feed Dial “N”
Stitch Finger “R”
Spreader Not Used
Set at:
Triple Cover Hem page 2
Needles: