Sharp Mx2310u User Guide

7-63
SYSTEM SETTINGS
Contents
Disabling of Clock Adjustment
This setting is used to prohibit changing of the date and 
time.
Disabling of Covers/Inserts Mode
(When the automatic document feeder is installed.)
This setting is used to prohibit the use of the covers and 
inserts function.
Set Keyboard Priority
When an external keyboard is connected, you can select 
whether the soft keyboard or the external keyboard is 
used.
Initial Original Count Setting
This specifies whether or not Original Count in the...

7-64
SYSTEM SETTINGS
Contents
MFP Display Pattern Setting
One of six colour patterns can be selected for the colour pattern in the touch panel.
A sample of the selected pattern can be viewed.
Customize Key Setting
Short-cuts to functions that are frequently used can be displayed in the base screen of each mode.
For information on customize keys, see the chapters for each function.
The settings are shown below.
Home Screen Settings
Use this to configure the home screen that appears when the [HOME] key is...

7-65
SYSTEM SETTINGS
Contents My Menu Settings
Use this to configure the My Menu screen that appears when the [My Menu] key is pressed.
The settings are shown below.
* Does not appear when user authentication is not enabled.
ItemDescription
Display TitleShow a title on the My Menu.
TitleEnter a maximum of 70 characters for the title name.
Display User Name*Show the currently logged-in user name on the My Menu.
Display DateShow the date and time on the My Menu.
Background ImageSelect the image that...

7-66
SYSTEM SETTINGS
Contents
Preview Setting
(When the hard disk drive is installed.)
Configure settings for the preview screen that can be 
used for fax / image send and document filing.
Default Preview
Set the selection state of the [Preview] key in each of the 
screens below.
Copy
Image Send
 Scan Send
 Internet Fax Send
 Fax Send
 Data Entry
 USB Memory Scan
 Address Book
Document Filing
 Scan to HDD
Default Preview Display
Set the display zoom ratio of the preview screen for 
copy, fax /...

7-67
SYSTEM SETTINGS
Contents
Device Control
These settings control devices installed on the machine. Touch the [Device Control] key to configure the settings.
Other Settings
Original Feeding Mode
The following original feeding modes can be set to 
operate by default in copy, Scan to HDD, and image 
send modes. When a mode is frequently used, this 
saves you from having to select the mode in the special 
modes each time you need to use it.
 Mixed Size Original (Same Width (Copy mode 
only)/Different...

7-68
SYSTEM SETTINGS
Contents
Original Size Detector Setting
One of the 8 groups of standard original sizes shown below can be selected for detection by the original size detection 
function.
* When the automatic document feeder is installed.
Cancel Detection at Document Glass
Original size detection on the document glass can be disabled. When this is done, all originals placed on the document 
glass are treated as special size originals.
Selections
Detectable original sizes
Document glassDocument feeder...

7-69
SYSTEM SETTINGS
Contents
Disabling of Devices
Use these settings when a peripheral device on the machine has failed or when you wish to temporarily disable a device.
Disabling of Document Feeder
(When the automatic document feeder is installed.)
Use this setting to prohibit the use of the automatic 
document feeder, such as when the feeder malfunctions. 
(When the setting is enabled, scanning is still possible 
using the document glass.)
Disabling of Duplex
This is used to disable two-sided...

7-70
SYSTEM SETTINGS
Contents
Copy Function Settings
The following settings are related to copying. Touch the [Copy Function Settings] key to configure the settings.
Default settings selected with these settings apply to all functions of the machine (not just the copy function).
Initial Status Settings
The copier settings are reset when the [POWER] key () is turned on, when the [CLEAR ALL] key () is pressed, or 
when the auto clear interval has elapsed. These settings are used to change the default...

7-71
SYSTEM SETTINGS
Contents
Other Settings
Copy Exposure Adjustment
This is used to adjust the exposure level when [Auto] is 
used for the copy exposure.
Colour
Use this to set the copy exposure level in colour mode for 
the document glass and for the automatic document feeder.
Black & White
Use this to set the copy exposure level in black & white 
mode for the document glass and for the automatic 
document feeder.
Rotation Copy Setting
When the original and paper are placed in different 
orientations,...

7-72
SYSTEM SETTINGS
Contents
Disabling Deletion of Job Programs
This is used to prohibit the deletion and changing of copy 
settings stored in job programs.
Disabling of Bypass-Tray in 
Duplex Copy
This is used to prohibit the use of the bypass tray when 
making two-sided copies.
The bypass tray is often used to feed label sheets, 
transparency film, and other special media for which 
two-sided copying is prohibited. If a sheet of one of these 
special media enters the reversing unit, a misfeed or...