Sharp Mx2310u User Guide

7-43
SYSTEM SETTINGS
Contents
List Print (Administrator)
*1 When network connection is enabled.
*2 When the hard disk drive and application integration module are installed.
Security Settings
* When the hard disk drive is installed.
ItemFactory default settingPage
■List Print (Administrator)7-91
●Administrator Settings List–7-91
●Image Sending Activity Report–7-91
●Data Receive/Forward List–7-91
●Web Settings List*1–7-91
●Metadata Set List*2–7-91
ItemFactory default settingPage
■Security Settings*7-92...

7-44
SYSTEM SETTINGS
Contents
Enable/Disable Settings
ItemFactory default settingPage
■Enable/Disable Settings7-93
●Printer Condition Settings7-93
X(When the hard disk drive and printer expansion kit are installed.)Disabled7-93
●User Control7-93
XDisabling of Printing by Invalid UserDisabled7-93
●Operation Settings7-93
XCancel Auto Clear TimerDisabled7-93
XDisabling of Job Priority OperationDisabled7-93
XDisabling of Bypass PrintingDisabled7-93
XDisable Auto Key RepeatDisabled7-93
XDisabling of Clock...

7-45
SYSTEM SETTINGS
Contents
*1 When the automatic document feeder is installed.
*2 When a paper drawer is installed.
*3 When a finisher is installed.
*4 When a punch module is installed.
*5 When a colour-related problem has occurred.
*6 When the hard disk drive and  printer expansion kit are installed.
*7 When network connection is enabled.
*8 When the Internet fax expansion kit is installed.
*9 When the facsimile expansion kit is installed.
*10 When the hard disk drive is installed.
Change...

7-46
SYSTEM SETTINGS
Contents
Product Key
* It may not be possible to use some settings, depending on the peripheral devices installed.
Data Backup
Storing/Calling of System Settings
Sharp OSA Settings
* When the hard disk drive and external account module or application communication module are available.
ItemFactory default settingPage
■Product Key*7-96
●Serial Number–7-96
●Font Kit for Barcode–7-96
●PS3 Expansion Kit–7-96
●Internet Fax Expansion Kit–7-96
●E-mail Alert and Status–7-96
●Application...

7-47
SYSTEM SETTINGS
Contents
User Control
User Control is used to configure settings for user authentication. Touch the [User Control] key to configure the settings.
User Authentication Setting
These settings enable or disable user authentication and specify the authentication method.
When user authentication is enabled, each user of the machine is registered. When a user logs in, settings for that user 
are applied. This function allows greater control of security and cost management than on previous...

7-48
SYSTEM SETTINGS
Contents
Other Settings
Actions when the Limit of Pages 
for Output Jobs
This setting determines whether or not a job will be 
completed if the page limit is reached while the job is in 
progress.
The following selections are available.
 Job is Stopped when the Limit of Pages is Reached
 Job is Completed even when the Limit of Pages is 
Reached
The Number of User Name 
Displayed Setting
The number of users that are displayed in the user 
selection screen can be selected (6, 12, or...

7-49
SYSTEM SETTINGS
Contents
Perform LDAP server access 
control.
Access control information for page count limits, 
authorities, and favourite operations can be stored on an 
LDAP server, and by using this LDAP server for network 
authentication, user authentication based on the stored 
access control information can be performed.
This can be used when user authentication is performed 
by network authentication using an LDAP server or a 
directory service (Active Directory, etc.).
Before using this...

7-50
SYSTEM SETTINGS
Contents
* If the user name cannot be acquired, the first 16 characters 
of the text string entered as the user name for network 
authentication is used.
If the login name is different but the user name received 
from the LDAP server is the same, or if the user name is 
already registered on the machine, Can not login 
because the user name entered has been previously 
registered will appear and login will not be possible. In 
this case, the user name stored on the LDAP server or...

7-51
SYSTEM SETTINGS
Contents
User List
This is used to store, edit, and delete users when user authentication is enabled.
When the [User List] key is touched, the following screen appears.
[Add New] key
Use this to add a new user.
[Delete All Users] key
Use this to delete all stored users. (Excluding factory 
stored users.) This operation can only be performed 
by an administrator.Delete All Users Auto-Resistered
Delete all auto-registered users.
☞Users auto-registered (page 7-49)
User List
This...

7-52
SYSTEM SETTINGS
Contents
*1 Items that can be changed.
*2 For detailed information of each of the settings, see List of settings and factory default settings of template groups (page 7-55).
Settings
*1 Does not appear when User Number is selected for the authentication method.
*2 Only appears when User Number is selected for the authentication method.
*3 Not required when network authentication is used, as the password stored in the LDAP server is used.
Pages Limit GroupUnlimited*1
Authority...