Sharp Mx2310u User Guide

7-23
SYSTEM SETTINGS
Contents
Printer Condition Settings
The Printer Condition Settings are used to configure basic printer settings and settings for printing from a DOS 
application. To configure the settings, touch the [Printer Condition Settings] key.
Printer Default Settings
The default settings are used to set advanced print conditions for printing in an environment where the print driver is not 
used (such as printing from MS-DOS or from a computer that does not have the provided print driver...

7-24
SYSTEM SETTINGS
Contents
*1 When a finisher is installed.
*2 This setting is used to adjust the line width of vector graphics (black & white printing only). Except for CAD and other 
specialized uses, there is normally no need to change this setting. When 0 is selected, all lines are printed at a 
width of 1 dot.
*3 Paper sizes that can be used with this function are A3, B4, A4, 11 x 17, 8-1/2 x 14, and 8-1/2 x 11. (This function 
may not take effect with some print methods.)
*4 Only effective when...

7-25
SYSTEM SETTINGS
Contents
PostScript Setting
When an error occurs during PostScript printing, these settings determine whether or not an error notice is printed and 
whether or not the PostScript data is received in binary format.
Settings
ItemDescriptionSelections
Print PS Error
When a PS (PostScript) error 
occurs during PostScript printing, 
this setting determines whether or 
not an error notice is printed.  (Enabled)
  (Disabled)
Binary ProcessingReceive PostScript data in binary 
format....

7-26
SYSTEM SETTINGS
Contents
Document Filing Control
This function requires the hard disk  drive. 
Document Filing Control is used to create, edit, and delete custom folders for document filing. Touch the [Document 
Filing Control] key to configure the settings.
When the [Document Filing Control] key is touched, the following screen will appear.
[Add New] key
Use this to add a new custom folder.List display
This displays a list of the currently configured custom 
folders. A folder can be selected to...

7-27
SYSTEM SETTINGS
Contents
USB-Device Check
This lets you check the connection when a USB device is connected to the machine. Touch the [USB-Device Check] key 
to check the connection.
User Control
This section explains settings for user control. Touch the [User Control] key to configure the settings.
Amend User Information
The information of the currently logged in user can be edited.
Settings
The status of a USB device that is not compatible with the machine will not appear.
 User Control settings...

7-28
SYSTEM SETTINGS
Contents
This section explains the system settings that are configured by the administrator of the machine.
Accessing the System Settings (Administrator)
To access the system settings (administrator), the administrator must log in as explained below.
When User Authentication is not Enabled
When User Authentication Setting (page 7-47) is not enabled, follow the procedure below to log in.
SYSTEM SETTINGS 
(ADMINISTRATOR)
1
Touch the [Admin Password] key.
2
Log in.
(1) Touch the...

7-29
SYSTEM SETTINGS
Contents
When User Authentication is Enabled
When User Authentication Setting (page 7-47) is enabled, follow the procedure below to log in.
When user authentication is by login name and password (and e-mail 
address)
When auto login is enabled, the login screen will not appear.
Administrator login is performed in the user selection screen. For more information on the login procedure when user 
authentication is enabled, see USER AUTHENTICATION (page 1-17) in 1. BEFORE USING THE...

7-30
SYSTEM SETTINGS
Contents Login by user number
Touch the [Admin Login] key.
Enter the administrator password in the administrator password 
entry screen.
This completes the administrator login procedure. The system 
settings (administrator) can be used.
 In addition to login by touching the [Admin Login] key, the system settings (administrator) can also be accessed when login 
is performed by selecting a user with administrator rights from the user list or by entering a user number with...

7-31
SYSTEM SETTINGS
Contents
System Settings (Administrator) List
The system settings that appear following administrator login are shown below. The default setting for each item is also 
shown.
User Control
*1 This cannot be set on the machine. Set this in User Control in the Web pages.
*2 When the HID card reader is available.
 Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
 For information on the general settings, see System...

7-32
SYSTEM SETTINGS
Contents
Energy save
* This function is not available in some countries and regions.
Operation Settings
ItemFactory default settingPage
■Energy Save7-61
●Toner Save Mode
7-61XPrintDisabled
XCopy*Disabled
●Auto Power Shut-OffEnabled7-61
●Auto Power Shut-Off TimerFix transition time.7-61
●Preheat Mode Setting1 min.7-61
ItemFactory default settingPage
■Operation Settings7-62
●Other Settings7-62
XKeys Touch SoundMiddle7-62‹Key Touch Sound at Initial PointDisabled
XAuto Clear Setting60...