Sharp Mx2310u User Guide

5-58
SCANNER/INTERNET FAX
Contents
5
Touch the [OK] key.
The specified size appears in the [Scan Size] key.
 When the scan size is specified by numerical values, the send size cannot be specified.
 When the automatic document feeder is used, an original longer than 432 mm (17) can be scanned (maximum width 
1000 mm (39-3/8)). In this case, touch the [Long Size] key in the screen of step 3.
☞Specifying the original scan size (by paper size) (page 5-56)
☞TRANSMITTABLE ORIGINAL SIZES (page 5-17)...

5-59
SCANNER/INTERNET FAX
Contents Specifying the send size of the image
Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If 
a send size smaller than the scan size is selected, the image will be reduced.
 The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by 
numerical values.
 The send size cannot be specified when [TIFF-S] is selected for the format in Internet...

5-60
SCANNER/INTERNET FAX
Contents
4
Specify the orientation in which the 
original is placed.
(1) Touch the appropriate [Image Orientation] 
key.
If this setting is not correct when sending an image with a 
changed ratio, a suitable image may not be transmitted.
(2) Touch the [OK] key.
The ratio used for reduction or enlargement of the original will appear between the Scan Size and the Send Size.
Scan/OriginalOK
A3Auto    A4Scan Size
2-Sided
Tablet2-Sided
Booklet
Send Size141%
Image Orientation
(1)
(2) 

5-61
SCANNER/INTERNET FAX
Contents
CHANGING THE EXPOSURE AND ORIGINAL IMAGE 
TYPE
The exposure and original image type can be set appropriately for the original to enable optimum scanning.
Refer the following tables to select appropriate settings.
How to select the exposure
How to select the original image type (Scan mode, USB memory mode and Data entry mode)
ExposureWhen to select
AutoThis setting automatically adjusts the exposure for light and dark parts of the original.
Manual
1-2Select this setting...

5-62
SCANNER/INTERNET FAX
Contents
3
Scan mode, USB memory mode, Data entry mode
Internet fax mode
Select the exposure and original image 
type.
(1) Select the original image type.
Touch the original image type key that matches the 
original image type.
(2) Adjust the exposure with the   keys.
The exposure darkens when the   key is touched, 
and lightens when the   key is touched.
(3) Touch the [OK] key.
(1) Touch the [Manual] key.
(2) Adjust the exposure with the   keys.
The exposure darkens when the...

5-63
SCANNER/INTERNET FAX
Contents
CHANGING THE RESOLUTION
The resolution setting can be selected.
1
Select the mode and display the image settings screen.
(1) Touch the tab of the mode that you wish to use.
(2) Touch the [Resolution] key.
☞IMAGE SETTINGS (page 5-53)
2
Scan mode, USB memory mode, Data entry mode
Internet fax mode
Select the resolution.
(1) Touch the key of the desired resolution.
(2) Touch the [OK] key.
In Internet fax mode, the [Half Tone] key can be touched to select halftone (except...

5-64
SCANNER/INTERNET FAX
Contents How to select the resolution
For normal text originals, 200X200dpi (200X100dpi in Internet fax mode) produces an image that is sufficiently legible. 
For photos and illustrations, a high resolution setting (600X600dpi, etc.) will produce a sharp image. However, a high 
resolution setting will result in a large file, and if the file is too large, transmission may not be possible. In this event, 
reduce the number of pages scanned or take other measures to decrease the...

5-65
SCANNER/INTERNET FAX
Contents
3
Set the format.
●Scanning in Mono2
(1) Select the file type.
To send a file using Encrypt PDF, touch the [Encry.] 
checkbox to select it ( ).
(2) Select the compression mode.
●Scanning in colour/greyscale
(1) Touch the indicated key to select 
[Colour/Grey] mode.
When [Colour/Grey] is highlighted, [Colour/Grey] mode is selected.
(2) Select the file type.
To send a file using Encrypt PDF, touch the [Encry.] 
checkbox to select it ( ).
(3) Select the compression ratio....

5-66
SCANNER/INTERNET FAX
Contents
4
To change the number of pages per file, 
enter the number of pages and exit the 
format settings.
(1) Touch the [Specified Pages per File] 
checkbox so that a checkmark   appears.
(2) Set the number of pages per file with the 
 keys.
(3) Touch the [OK] key.
 When a checkmark does not appear in the [Specified Pages per File] checkbox  , one file is created for all 
scanned pages.
 When [Specified Pages per File] is selected, consecutive numbers are added to the...

5-67
SCANNER/INTERNET FAX
Contents Changing the format (Internet fax mode)
The file format for sending an Internet fax is normally set to [TIFF-F]. If the destination Internet fax machine does not 
support full mode (it only supports simple mode), follow the steps below to select [TIFF-S].
1
Switch to Internet fax mode and display the file format settings screen.
(1) Touch the [Internet Fax] tab.
(2) Touch the [File Format] key.
☞IMAGE SETTINGS (page 5-53)
2
Select the file format.
(1) Touch the key of...