Sharp Mx2310u User Guide

5-78
SCANNER/INTERNET FAX
Contents
3
Select the special modes.
(1) Touch the tab of the mode that you wish to use.
(2) Touch the [Special Modes] key.
☞SPECIAL MODES (page 5-71)
4
Select Dual Page Scan.
(1) Press the [Dual Page Scan] key so that it is 
highlighted.
(2) Touch the [OK] key.
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Scanning begins.
When scanning finishes, place the next original and press the [COLOUR START] key or the [BLACK & WHITE START] key. 
Repeat until all pages...

5-79
SCANNER/INTERNET FAX
Contents
SENDING AN IMAGE AT A SPECIFIED TIME 
(Timer Transmission)
This function requires the hard disk drive.
This function lets you specify a time at which a transmission or broadcast transmission will automatically take place. 
Transmission begins automatically at the specified time.
 When a timer transmission is stored, keep the main power switch in the on position. If the main power switch is in the off 
position at the specified time, transmission will not take place.
...

5-80
SCANNER/INTERNET FAX
Contents
4
Set the time with the   keys.
(1) Specify the day.
If you do not wish to specify a day, select [---]. In this 
case, transmission will begin when the time specified in 
(2) arrives.
(2) Specify the time (hour, minute)
Select the time in 24-hour format.
You can also directly touch a numeric display key to 
change the setting with the numeric keys.
(3) Touch the [OK] key.
When this screen is opened, the setting will show the current time. If the time is not correct,...

5-81
SCANNER/INTERNET FAX
Contents
WHITENING FAINT COLOURS IN THE IMAGE 
(Suppress Background)
This feature is used to suppress light background areas.
 This function cannot be used in Internet fax mode.
 When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Specify the destination.
☞
ENTERING DESTINATIONS (page 5-18)
When scanning...

5-82
SCANNER/INTERNET FAX
Contents
4
Select the suppress background setting.
(1) Adjust the background suppression level.
Touch the [+] key to suppress only faint background.
Touch the [-] key to suppress faint to dark background.
(2) Touch the [OK] key.
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Scanning begins.
 If you inserted the original pages in the document feeder tray, all pages are scanned. 
A beep will sound to indicate that scanning is finished.
 If you are scanning the...

5-83
SCANNER/INTERNET FAX
Contents
SCANNING BOTH SIDES OF A CARD ONTO 
A SINGLE PAGE (Card Shot)
This function lets you send the front and reverse sides of a card as a single page, without the need to send each side 
separately.
 When using card shot, the original must be placed on the document glass.
 When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
1
Place the original face down on the 
document glass.
2
Specify the destination.
☞...

5-84
SCANNER/INTERNET FAX
Contents
4
Specify the original size.
(1) Enter the original size.
 Touch the X (width) numeric value display key and 
enter the width.
 Touch the Y (height) numeric value display key and 
enter the height.
(A) To return the original size to the default size, touch the 
[Size Reset] key.
(B) To automatically enlarge or reduce the image to fit the 
send size, touch the [Fit to Send Size] key. If you wish 
to scan the original at the entered original size, there 
is no need to...

5-85
SCANNER/INTERNET FAX
Contents
7
Touch the [Read-End] key.
If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure, 
resolution, scan size, and send size.
The ratio cannot be specified and Rotation Sending Setting cannot be selected.
To cancel Card Shot...
Touch the [Cancel] key in the screen of step 4.
Read-EndConfigure
Place next original.       (Pg.No.x)
Press [Start].
When finished, press [Read-End]. 

5-86
SCANNER/INTERNET FAX
Contents
SCANNING MANY ORIGINALS AT ONCE 
(Job Build)
This function requires the automatic document feeder to be installed.
This function lets you separate an original consisting of numerous pages into sets, scan each set using the automatic 
document feeder, and transmit the pages in a single transmission. Use this function when the number of originals that 
you wish to scan exceeds the maximum number of sheets that can be inserted in the automatic document feeder at 
once....

5-87
SCANNER/INTERNET FAX
Contents
4
Select job build mode.
(1) Touch the [Job Build] key so that it is 
highlighted.
(2) Touch the [OK] key.
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key to scan the 
first set of originals.
If the destination is an Internet fax destination, press the [BLACK & WHITE START] key.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
6
Insert the next set of originals and press the [COLOUR START] key or the 
[BLACK & WHITE START] key....