Sharp Mx2310u User Guide

5-88
SCANNER/INTERNET FAX
Contents
SCANNING ORIGINALS OF DIFFERENT 
SIZES (Mixed Size Original)
This function requires the automatic document feeder to be installed.
This feature lets you scan originals of different sizes at the same time; for example, B4 (8-1/2 x 14) size originals 
mixed together with A3 (11
 x 17) size originals. When scanning the originals, the machine automatically detects the 
size of each original.
This feature can only be used with the following combinations of original sizes:
...

5-89
SCANNER/INTERNET FAX
Contents
4
Select the mixed size original setting.
(1) Touch the [Mixed Size Original] key so that 
it is highlighted.
(2) Touch the [OK] key.
If an original scan size has been specified, a message will appear when the [Mixed Size Original] key is touched. To 
enable the Mixed Size Original setting, change the scan size setting to auto and then touch the [Mixed Size Original] 
key again.
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Scanning begins. A beep...

5-90
SCANNER/INTERNET FAX
Contents
SCANNING THIN ORIGINALS 
(Slow Scan Mode)
This function requires the automatic document feeder to be installed.
Use this function when you wish to scan thin originals using the automatic document feeder. This function helps prevent 
thin originals from misfeeding.
When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
1
Insert the originals face up in the 
document feeder tray.
Adjust the original guides slowly....

5-91
SCANNER/INTERNET FAX
Contents
4
Select slow scan mode.
(1) Touch the [Slow Scan Mode] key so that it is 
highlighted.
(2) Touch the [OK] key.
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Scanning begins. A beep will sound to indicate that scanning is finished.
If the destination is an Internet fax destination, press the [BLACK & WHITE START] key.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
 When this function is selected, automatic 2-sided scanning is...

5-92
SCANNER/INTERNET FAX
Contents
CHECKING THE NUMBER OF SCANNED 
ORIGINAL SHEETS BEFORE TRANSMISSION 
(Original Count)
The number of scanned original sheets can be counted and displayed before transmission. Checking the number of 
scanned original sheets before transmission helps prevent transmission mistakes.
 This function cannot be used in USB memory mode.
 The setting can be enabled separately for each mode.
1
Insert the originals face up in the 
document feeder tray.
Insert the originals all the...

5-93
SCANNER/INTERNET FAX
Contents
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Scanning begins.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation. All scanned data will be cleared.
6
When scanning ends, check the number 
of original sheets scanned and touch the 
[OK] key.
Transmission will begin.
 When Job Build mode is used, the confirmation message will 
appear after the [Read-End] key is touched.
 The message on the screen shows the number of sheets 
scanned...

5-94
SCANNER/INTERNET FAX
Contents
STAMPING SCANNED ORIGINALS (Verif. Stamp)
This function stamps each original that is scanned using the automatic document feeder, allowing you to verify that all 
originals were correctly scanned.
 To use this function, the automatic document feeder and optional stamp unit must be installed.
 When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
1
Insert the originals face up in the 
document feeder tray.
2...

5-95
SCANNER/INTERNET FAX
Contents
4
Select Verif. Stamp.
(1) Touch the   keys to switch through the 
screens.
(2) Touch the [Verif. Stamp] key so that it is 
highlighted.
(3) Touch the [OK] key.
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Scanning begins. A beep will sound to indicate that scanning is finished.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
 When two-sided originals are used, the front of each original is stamped twice.
 If an error occurs...

5-96
SCANNER/INTERNET FAX
Contents
ELIMINATING BLANK PAGES FROM A 
TRANSMISSION (Blank Page Skip)
When blank pages are included in originals scanned using the automatic document feeder, the blank pages can be 
detected and automatically eliminated from transmission.
 This function requires the automatic document feeder.
 This function cannot be used in Internet fax mode.
 Depending on the original, some pages that are not blank may be detected as blank pages and thus not sent, and some 
pages that are...

5-97
SCANNER/INTERNET FAX
Contents
4
Set blank page skipping.
(1) Select the type of blank page to be skipped.
Select from two types.
To include blank pages on which the content on the 
opposite side shows through, touch [Skip Blank and Back 
Shadow].
(2) Touch the [OK] key.
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Scanning begins. A beep will sound to indicate that scanning is finished.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
6
When scanning is...