Sharp Mx2310u User Guide

4-127
FACSIMILE
Contents
RECEIVING A FAX AFTER ANSWERING A CALL ON 
THE EXTENSION PHONE (Remote Reception)
Follow the steps below if you need to start fax reception after answering a call and speaking on the extension phone.
If you are on a pulse-dial (rotary) line, set the extension phone to issue tone signals.
MAKING AND RECEIVING PHONE CALLS
You can make and receive calls like normal on your extension phone. A phone call can also be made by dialling on the 
machine.
1
When you hear ringing, answer the...

4-128
FACSIMILE
Contents
This section explains how to check the status of reserved transmission jobs and received faxes.
JOB STATUS SCREEN
The job status screen is displayed when the [JOB STATUS] key on the operation panel is pressed. The job status 
screen shows the status of jobs by mode. When the [JOB STATUS] key is pressed, the job status screen of the mode 
that was being used before the key was pressed appears.
Reserved transmissions and received faxes are referred to as jobs here.
Example:...

4-129
FACSIMILE
Contents
JOB QUEUE SCREEN AND COMPLETED JOB SCREEN
The job status screen consists of two screens: the job queue screen, which shows reserved jobs and the job currently in 
progress, and the completed jobs screen. To switch between the two screens, touch the job status screen selector key 
((2) below).
(1) Mode select tabs
Use these tabs to select the job status screen of each 
mode.
(2) Job status screen selector key
Touch this key to switch between the job queue screen 
and the completed...

4-130
FACSIMILE
Contents Job key display
The following information is shown in the job queue keys and completed job keys that appear in the job status screen.
(1) Indicates the number (position) of the job in the job 
queue.
When the job currently being transmitted is finished, each 
job moves up one position in the job queue.
This number does not appear in keys in the completed 
jobs screen.
(2) Mode icon
This indicates the type of job. In the completed jobs 
screen, a colour bar indicating black &...

4-131
FACSIMILE
Contents
 Completed job
MessageStatus
Send OKTransmission completed.
In MemoryReception completed but the fax 
has not been printed.
ReceivedPrinted received fax data.
Forward OKThe received fax has been 
forwarded.
StoppedThe job was stopped.
DeleteDeleted received data in the image 
check screen.
Number of 
successful 
transmission 
destinations / 
Total 
destinations 
OKCompletion of a broadcast 
transmission, serial polling or 
inbound routing operation.
If transmission to 3...

4-132
FACSIMILE
Contents
OPERATION WHEN A JOB IN THE JOB QUEUE IS 
COMPLETED
When a normal transmission job is completed, it moves to the completed jobs screen and Send OK appears in the 
status column.
Received faxes, timer transmission jobs, retry jobs, and forwarding jobs are handled in the job status screen as 
explained below.
Fax reception jobs
While a fax is being received, Receiving appears in the job queue screen.
When reception is completed, the job moves to the completed jobs screen and In...

4-133
FACSIMILE
Contents
CHECKING A RESERVED JOB OR THE JOB IN 
PROGRESS
The detailed contents of a broadcast transmission or serial polling job can be displayed. Select (touch) the key of the job 
that you wish to check and touch the [Detail] key. The job details screen will appear (see below).
The job name and progress (number of completed destinations / total destinations) appear at the top of the screen.
Touch a tab to display the information that appears on that tab. The following information...

4-134
FACSIMILE
Contents
CHECKING COMPLETED JOBS
You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on 
completed broadcast transmission jobs, received fax forwarding jobs, serial polling jobs, and jobs that used document 
filing. Touch the key of the desired job in the completed jobs screen and touch the [Detail] key. The job detail screen 
(see below) will appear.
The job name appears at the top of the job detail screen.
To view...

4-135
FACSIMILE
Contents
CANCELLING A FAX IN PROGRESS OR A 
RESERVED FAX
Follow the steps below to cancel a fax transmission that is in progress or a reserved fax job.
1
Press the [JOB STATUS] key.
2
Select the fax job that you wish to 
cancel.
(1) Touch the key of the fax job to be cancelled.
(2) Touch the [Stop/Delete] key.
3
Touch the [Yes] key.
If you do not wish to cancel the selected fax job...
Touch the [NO] key.
Printing of received faxes and forwarding jobs set using Inbound Routing Settings...

4-136
FACSIMILE
Contents
GIVING PRIORITY TO A RESERVED FAX 
JOB
When multiple jobs are waiting to be transmitted, the jobs are normally transmitted in the order they were reserved. 
If you need to give priority to a job and send it ahead of the other jobs, follow the steps below.
1
Press the [JOB STATUS] key.
2
Select the fax job to which you wish to 
give priority.
(1) Touch the key of the desired job.
(2) Touch the [Priority] key.
The selected job moves up to the position immediately 
following the job...