Sharp Mx2310u User Guide

4-87
FACSIMILE
Contents
7
Touch the [Read-End] key.
If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure, 
resolution, scan size, and send size.
 The ratio cannot be specified and Rotation Sending Setting cannot be selected.
 This function cannot be used in direct transmission mode or when the speaker is used to dial.
To cancel Card Shot...
Touch the [Cancel] key in the screen of step 4.
Place next original.       
Press [Start].
When...

4-88
FACSIMILE
Contents
SENDING A LARGE NUMBER OF PAGES 
(Job Build)
This function requires the automatic document feeder to be installed.
This function lets you separate an original consisting of numerous pages into sets, scan each set using the automatic 
document feeder, and transmit the pages in a single transmission. Use this function when there are more original pages 
than can be placed at once in the auto document feeder.
When scanning originals that are separated into sets, scan the set that has...

4-89
FACSIMILE
Contents
4
Press the [BLACK & WHITE START] key to scan the first set.
To cancel scanning...
Press the [STOP] key ( ).
5
Insert the next set of originals and press the [BLACK & WHITE START] key.
Repeat this step until all originals have been scanned.
To cancel scanning...
Press the [STOP] key ( ). All scanned data will be cleared.
6
Touch the [Read-End] key.
 If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the 
transmission is...

4-90
FACSIMILE
Contents
TRANSMITTING ORIGINALS OF DIFFERENT 
SIZES (Mixed Size Original)
This function requires the automatic document feeder to be installed.
This feature lets you scan and transmit originals of different sizes at the same time; for example, B4 (8-1/2 x 14) size 
originals mixed together with A3 (11
 x 17) size originals. When scanning the originals, the machine automatically 
detects the size of each original.
This feature can only be used with the following combinations of original...

4-91
FACSIMILE
Contents
4
Press the [BLACK & WHITE START] key.
Scanning begins. A beep will sound to indicate that scanning is finished.
To cancel scanning...
Press the [STOP] key ( ).
 Once mixed size originals has been selected, an original scan size cannot be specified.
 When mixed size originals are set, automatic duplex scanning cannot be used.
 When the mixed size original setting is selected, rotation sending does not operate.
To cancel the mixed size original setting...
Touch the [Mixed Size...

4-92
FACSIMILE
Contents
FAXING THIN ORIGINALS (Slow Scan Mode)
This function requires the automatic document feeder to be installed.
Use this function when you wish to scan thin originals using the automatic document feeder. This function helps prevent 
thin originals from misfeeding.
1
Insert the originals face up in the 
document feeder tray.
Adjust the document guides slowly.
If the originals are inserted with too much force, they may crumple and misfeed.
2
Enter the destination fax number.
☞
ENTERING...

4-93
FACSIMILE
Contents
4
Press the [BLACK & WHITE START] key.
Scanning begins. A beep will sound to indicate that scanning is finished.
To cancel scanning...
Press the [STOP] key ( ).
When this function is selected, automatic 2-sided scanning is not possible.
To cancel slow scan mode...
Touch the [Slow Scan Mode] key in the screen of step 3 so that it is not highlighted.
System Settings (Administrator): Original Feeding Mode
This is used to have scanning always take place using slow scan mode. 

4-94
FACSIMILE
Contents
CHECKING THE NUMBER OF SCANNED 
ORIGINAL SHEETS BEFORE TRANSMISSION 
(Original Count)
The number of scanned original sheets can be counted and displayed before transmission. Checking the number of 
scanned original sheets before transmission helps prevent transmission mistakes.
1
Insert the originals face up in the 
document feeder tray.
Insert the originals all the way into the document feeder tray. 
Multiple originals can be placed in the document feeder tray. 
The stack of...

4-95
FACSIMILE
Contents
5
When scanning ends, check the number 
of original sheets scanned and touch the 
[OK] key.
Transmission will begin.
 When Job Build mode is used, the confirmation message will 
appear after the [Read-End] key is touched.
 The message on the screen shows the number of sheets 
scanned in (A), and the number of pages (sheet sides) 
scanned in (B). For example, if both sides of one original 
sheet are scanned, 1 will appear in (A) and 2 will appear 
in (B).
If this step is not...

4-96
FACSIMILE
Contents
STAMPING SCANNED ORIGINALS (Verif. Stamp)
This function requires the  automatic document feeder.
This function stamps each original that is scanned using the automatic document feeder, allowing you to verify that all 
originals were correctly scanned.
To use this function, the optional stamp unit must be installed.
1
Insert the originals face up in the 
document feeder tray.
2
Enter the destination fax number.
☞
ENTERING DESTINATIONS (page 4-17)
3
Select Verif. Stamp.
(1) Touch...