Sharp Mx 3501 N Manual

135
COPYING IN THE CENTER OF THE PAPER 
(Centering)
This is used to center the copied image on the paper.
This lets you place the image in the center of the paper when the original size is smaller than the paper size or when the 
image is reduced.
Not using the centering functionUsing the centering function
1
Place the original.
Place the original face up in the document feeder tray, or face 
down on the document glass.
2
Touch the [Special Modes] key.
3
Select Image Edit.
(1) Touch the   keys to switch...

136
5
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
Copying will begin.
 If the originals were placed in the document feeder tray, the 
originals are copied.
 If you are using the document glass, copy each page one 
page at a time.
If you are using the sort function or other function that 
requires all originals to be scanned before the copies are 
printed, you must use the same [START] key that you used 
to scan the first original to scan each of the remaining 
originals.
To...

137
REVERSING BLACK AND WHITE IN A COPY
(B/W Reverse)
This is used to reverse black and white in a copy to create a negative image. This function can only be used for black 
and white copying.
Originals with large black areas (which use a large amount of toner) can be copied using Black/White Reverse to reduce 
toner consumption.
1
Place the original.
Place the original face up in the document feeder tray, or face 
down on the document glass.
2
Touch the [Special Modes] key.
3
Select Image Edit.
(1)...

138
5
Press the [BLACK & WHITE START] key 
().
Copying will begin.
 If the originals were placed in the document feeder tray, the 
originals are copied.
 If you are using the document glass, copy each page one 
page at a time.
When using this function, the [COLOR START] key ( ) cannot be used.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
When this function is selected, the exposure mode setting automatically changes to Text.
To cancel B/W reverse...
Touch the [B/W...

139
ADJUSTING RED/GREEN/BLUE IN COPIES 
(RGB Adjust)
This feature is used to strengthen or weaken any one of the three color components R (red), G (green), or B (blue).
For an image adjustment example, see Adjusting red/green/blue in copies (RGB Adjust) in the Quick Start Guide.
1
Place the original.
Place the original face up in the document feeder tray, or face 
down on the document glass.
2
Touch the [Special Modes] key.
3
Select Color Adjustments.
(1) Touch the   keys to switch through 
the screens....

140
5
Adjust red, green, or blue.
(1) Touch the key of the color that you wish to 
adjust: [R (Red)], [G (Green)], or [B (Blue)].
Only one color can be adjusted. (If you adjust one color 
and then adjust another color, the adjustment of the first 
color is canceled.)
(2) Adjust the selected color.
Touch the [+] key to strengthen the selected color, or 
touch the [-] key to weaken the color.
(3) Touch the [OK] key.
When the [OK] key is touched, you will return to the 
special mode screen. Touch the [OK]...

141
ADJUSTING THE SHARPNESS OF AN 
IMAGE (Sharpness)
This is used to sharpen an image or make it softer.
For an image adjustment example, see Adjusting the sharpness of an image (Sharpness) in the Quick Start Guide.
1
Place the original.
Place the original face up in the document feeder tray, or face 
down on the document glass.
2
Touch the [Special Modes] key.
3
Select Color Adjustments.
(1) Touch the   keys to switch through 
the screens.
(2) Touch the [Color Adjustments] key.
4
Touch the [Sharpness]...

142
6
Press the [COLOR START] key ( ).
Copying will begin.
 If the originals were placed in the document feeder tray, the 
originals are copied.
 If you are using the document glass, copy each page one 
page at a time.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
To cancel the sharpness setting...
Touch the [Cancel] key in the screen of step 5. 

143
WHITENING FAINT COLORS IN COPIES 
(Suppress Background)
This feature is used to suppress light background areas.
1
Place the original.
Place the original face up in the document feeder tray, or face 
down on the document glass.
2
Touch the [Special Modes] key.
3
Select Color Adjustments.
(1) Touch the   keys to switch through 
the screens.
(2) Touch the [Color Adjustments] key.
4
Touch the [Suppress Background] key.
Level [+]
Level [-]
The lightness level at which 
suppression takes place 
can be...

144
5
Select suppress background settings.
(1) Adjust the background suppression level.
To strengthen the background suppression level 
(suppress darker backgrounds), touch the [-] key. To 
weaken the level (suppress only light backgrounds), touch 
the [+] key.
(2) Touch the [OK] key.
When the [OK] key is touched, you will return to the 
special mode screen. Touch the [OK] key to return to the 
base screen of the copy mode.
6
Press the [COLOR START] key ( ).
Copying will begin.
 If the originals were...