Sharp Mx 3501 N Manual

145
ADJUSTING THE COLOR (Color Balance)
The color, tone, and density of color copies can be adjusted.
For an image adjustment example, see Adjusting the color (Color Balance) in the Quick Start Guide.
Each of the colors yellow, cyan, magenta, and black are 
divided into 8 gradations from light to dark, and the 
average density of each gradation can be adjusted,
Each of the 8 gradations can be adjusted separately, or 
all eight gradations can be adjusted at once.
Color Balance
YM
CBk
OKCancel
All12345678...

146
5
Adjust the color balance.
Examples of color balance adjustment
(1) Select the color to be adjusted.
Select [Y] (yellow), [M] (magenta), [C] (cyan), or [Bk] 
(black).
If only the rectangular area around the letter in a key is 
highlighted, the settings have been changed from the 
factory default settings.
(2) Select the gradation to be adjusted.
Select the gradation with the   keys.
Touch the   keys to move the highlighting to one 
of gradations 1 to 8 or All.
To adjust all eight gradations at once,...

147
ADJUSTING THE BRIGHTNESS OF A COPY 
(Brightness)
The brightness of color images can be adjusted.
For an image adjustment example, see Adjusting the brightness of a copy (Brightness) in the Quick Start Guide.
1
Place the original.
Place the original face up in the document feeder tray, or face 
down on the document glass.
2
Touch the [Special Modes] key.
3
Select Color Adjustments.
(1) Touch the   keys to switch through 
the screens.
(2) Touch the [Color Adjustments] key.
4
Touch the [Brightness]...

148
6
Press the [COLOR START] key ( ).
Copying will begin.
 If the originals were placed in the document feeder tray, the 
originals are copied.
 If you are using the document glass, copy each page one 
page at a time.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
To cancel the brightness setting...
Touch the [Cancel] key in the screen of step 5. 

149
ADJUSTING THE INTENSITY OF A COPY 
(Intensity)
This is used to adjust the intensity (saturation) of color images.
For an image adjustment example, see Adjusting the intensity of a copy (Intensity) in the Quick Start Guide.
1
Place the original.
Place the original face up in the document feeder tray, or face 
down on the document glass.
2
Touch the [Special Modes] key.
3
Select Color Adjustments.
(1) Touch the   keys to switch through 
the screens.
(2) Touch the [Color Adjustments] key.
4
Touch the...

150
6
Press the [COLOR START] key ( ).
Copying will begin.
 If the originals were placed in the document feeder tray, the 
originals are copied.
 If you are using the document glass, copy each page one 
page at a time.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
This function cannot be used in combination with Color Tone Enhancement in the copy exposure settings.
To cancel the intensity setting...
Touch the [Cancel] key in the screen of step 5. 

151
CHECKING COPIES BEFORE PRINTING
(Proof Copy)
This feature prints only one set of copies, regardless of how many sets have been specified. After the first set is checked 
for errors, the remaining sets can be printed. Normally it is necessary to re-scan the original each time changes to 
settings are required. However, this feature makes it possible to change settings for the scanned original without 
scanning it again, allowing you perform copying more efficiently.
1
Place the original.
Place the...

152
4
Select Proof Copy.
(1) Touch the   keys to switch through 
the screens.
(2) Touch the [Proof Copy] key.
(3) Touch the [OK] key.
5
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
To cancel copying...
Press the [STOP] key ( ). 
6
If there are no problems with the first set 
that is printed, touch the [End] key. If 
you need to make changes, touch the 
[Change] key.
If the [End] key is touched, the remaining sets are printed.
If you touched the [Change] key, go to the next...

153
9
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
One set of copies is printed again using the adjusted settings. 
The number of sets does not change at this time.
If settings must be adjusted again, repeat steps 6 through 9 
until there are no problems.
When you are ready to print the remaining sets, go to the next 
step.
10
Touch the [End] key.
You will return to the base screen of copy mode and the 
remaining sets will be printed.
To cancel scanning of the original and...

154
COPYING ORIGINALS OF DIFFERENT SIZES 
(Mixed Size Original)
Originals of mixed sizes can be copied together, such as 11 x 17 (A3) originals mixed in with 8-1/2 x 14 (B4) 
originals. When scanning the originals, the machine automatically detects the size of each original and uses paper 
appropriate for that size.
There are two settings for mixed size originals.
Same Width
Use this setting for originals that are different sizes but have sides that are the same length. The 
originals are inserted in the...