Sharp Mx 3501 N Manual

155
1
Insert the originals face up in the 
document feeder tray.
●When Same Width is used
Place the originals with the sides that are the same length 
aligned on the left.
●When Different Width is used
Place the originals with the corners aligned in the far left corner 
of the document feeder tray.
2
Touch the [Special Modes] key.
3
Select Mixed Size Original.
(1) Touch the   keys to switch through 
the screens.
(2) Touch the [Mixed Size Original] key.
8-1/2 x 11 (A4)
11 x 17 (A3)
Place with the sides...

156
4
Select Mixed Size Original settings.
(1) Touch the [Same Width] key or the 
[Different Width] key as appropriate for the 
originals.
(2) Touch the [OK] key.
You will return to the base screen of copy mode.
5
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
Copying of the originals in the document feeder tray begins.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
 When Different Width is used on the MX-3501N/4501N, 2-Sided to 2-Sided and 2-Sided to...

157
COPYING THIN ORIGINALS
(Slow Scan Mode)
Use this function when you wish to scan thin originals using the automatic document feeder. This function helps prevent 
thin originals from misfeeding.
1
Place the originals face up in the 
document feeder tray with the edges 
aligned evenly.
Place the originals face up. Insert the originals all the way into 
the document feeder tray. The stack must not be higher than 
the indicator line.
If the originals are inserted with too much force, they may crumple and...

158
4
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
Copying of the originals in the document feeder tray begins.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
The 2-Sided to 2-Sided and 2-Sided to 1-Sided modes of automatic two-sided copying cannot be used.
To cancel the slow scan mode setting...
Touch the [Slow Scan Mode] key in the screen of step 3 so that it is not highlighted.
or 

159
STORING COPY OPERATIONS (Job Programs)
A job program is a group of copy settings stored together. When copy settings are stored in a job program, the settings 
can be called up and used for a copy job by means of a simple operation.
For example, suppose 11 x 17 (A3) size CAD drawings are copied once a month for archive purposes using the 
following settings:
(1) The 11 x 17 (A3) size CAD drawings are reduced to 8-1/2 x 11(A4) size.
(2) The drawings have fine lines that do not show clearly, and thus a...

160
STORING A JOB PROGRAM
The procedure for storing copy settings in a job program is explained below.
1
Press the [PROGRAM] key ( ).
2
Touch the [Store/Delete] tab.
3
Touch a numeric key that is not 
highlighted.
Numeric keys in which job programs are already stored are 
highlighted.
If a highlighted numeric key is touched, the following screen appears.
The [Store] key can be touched to delete the stored settings and store new settings.
When Disabling Deletion of Job Programs is enabled in the system...

161
DELETING A JOB PROGRAM
The procedure for deleting a job program is explained below.
5
Touch the [Exit] key.
1
Press the [PROGRAM] key ( ).
2
Touch the [Store/Delete] tab.
3
Touch the numeric key in which the job 
program that you wish to delete is 
stored.
4
Touch the [Delete] key.
Job Programs
Press program number.
12
567
3
8
4
1/6
Recall
Exit
Store/Delete
LOGOUT
Job Programs
Press program number.
567
3
8
412
1/6
Exit
Store/DeleteRecall
Job Programs
Press program number.
12
567
3
8
4
1/6
Recall...

162
5
Touch the [Exit] key.
When Disabling Deletion of Job Programs is enabled in the system settings (administrator), this function cannot be used.
Job Programs
Press program number.
12
567
3
8
4
Recall
1/6
Exit
Store/Delete 

163
APPENDIX
Examples of covers and inserts
The relations between the originals and finished copies when covers or inserts are inserted are shown on the following 
pages.
Covers
 1-sided copying of 1-sided originals
 1-sided copying of 2-sided originals 2-sided copying of 1-sided originals
 2-sided copying of 2-sided originals
Inserts
 1-sided copying of 1-sided originals
 1-sided copying of 2-sided originals 2-sided copying of 1-sided originals
 2-sided copying of 2-sided originals
Symbols used...

164
Covers (1-sided copying of 1-sided originals)
1-sided copies are made of the following 1-sided originals.
1st page2nd page3rd page4th page5th page6th page
Cover copying condition
Resulting copies
Front coverBack cover
No copyingNo copying
1-sided 
copyingNo copying
2-sided 
copyingNo copying
No copying1-sided 
copying
No copying2-sided 
copying
1-sided 
copying1-sided 
copying
1-sided 
copying2-sided 
copying
2-sided 
copying1-sided 
copying
2-sided 
copying2-sided 
copying
123456
123456
123456...