Sharp Mx 3501 N Manual

125
2
Touch the [Special Modes] key.
3
Select Image Edit.
(1) Touch the   keys to switch through 
the screens.
(2) Touch the [Image Edit] key.
4
Touch the [Photo Repeat] key.
5
(1)Touch the key showing the original type and 
paper size combination that you wish use.
Touch the   keys to switch through the screens 
and touch the desired repeat type key (8-1/2 x 11 or 
11 x 17) (A4 or A3).
(2) Touch the [OK] key.
When the [OK] key is touched, you will return to the 
special mode screen. Touch the [OK] key...

126
 The original must be placed on the document glass.
 Only 8-1/2 x 11 (A4) or 11 x 17 (A3) size paper can be used.
 The copy ratio is 100% when this function is used. (The ratio cannot be changed.) However, for a business card size 
original (up to 2-1/8 x 3-5/8 (57 x 100 mm)), the images are reduced to 95%.
To cancel the photo repeat setting...
Touch the [Cancel] key in the screen of step 5. 

127
CREATING A LARGE POSTER (Multi-Page 
Enlargement)
This function is used to enlarge an image of an original and print it as a composite image using multiple sheets of paper.
1
Touch the [Special Modes] key.
2
Select Image Edit.
(1) Touch the   keys to switch through 
the screens.
(2) Touch the [Image Edit] key.
3
Touch the [Multi-Page Enlargement] key.
Original (8-1/2 x 11 (A4) size)
Copy (enlarged image on 8 sheets 
of 11 x 17 (A3) paper)
Ready to scan for copy.
2-Sided Copy
0
Output
Special Modes...

128
4
Inch sizes
A sizes
B sizesSelect the size system that you wish to 
use for multi-page enlargement.
Touch the   keys to display the screen that shows the 
desired group of sizes.
5
Set the enlargement size and the original size.
(1) Select the enlargement size.
(2) Select the size of the original to be used.
A suitable original placement orientation and the number of 
sheets of paper required for the enlarged image are displayed 
based on the selected original size and enlargement size.
Check the...

129
6
Place the original face down on the 
document glass in the orientation 
indicated in the screen.
7
Touch the [OK] key.
When the [OK] key is touched, you will return to the special 
mode screen. Touch the [OK] key to return to the base screen 
of the copy mode.
8
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
Copying of the original on the document glass begins.
If you are using the sort function or other function that requires 
all originals to be scanned before the copies...

130
REVERSING THE IMAGE (Mirror Image)
This feature is used to make a copy that is a mirror image of the original.
1
Place the original.
Place the original face up in the document feeder tray, or face 
down on the document glass.
2
Touch the [Special Modes] key.
3
Select Image Edit.
(1) Touch the   keys to switch through 
the screens.
(2) Touch the [Image Edit] key.
4
Select Mirror Image.
(1) Touch the [Mirror Image] key so that it is 
highlighted.
(2) Touch the [OK] key.
When the [OK] key is touched,...

131
5
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
Copying will begin.
 If the originals were placed in the document feeder tray, the 
originals are copied.
 If you are using the document glass, copy each page one 
page at a time.
If you are using the sort function or other function that 
requires all originals to be scanned before the copies are 
printed, you must use the same [START] key that you used 
to scan the first original to scan each of the remaining 
originals.
To...

132
COPYING AN 11 x 17 SIZE ORIGINAL 
WITHOUT CUTTING OFF THE EDGES 
(11x17 Full Bleed)
This feature lets you copy an entire 11 x 17 (A3) size original at full size with no image cut-off at the edges.
12 x 18 (A3W) size is used, which is slightly larger than 11 x 17 (A3) size.
1
Place the original face down on the 
document glass.
2
Touch the [Special Modes] key.
3
Select Image Edit.
(1) Touch the   keys to switch through 
the screens.
(2) Touch the [Image Edit] key.
4
Select 11x17 Full Bleed.
(1) Touch...

133
5
Place 12 x 18 (A3W) paper in the 
bypass tray.
Pull out the extension tray, adjust the guides to the width of 
12 x 18 (A3W) paper, and place the paper in the bypass tray.
6
Open the paper settings screen.
(1) Touch the [Job Detail Settings] key.
(2) Touch the [Paper Select] key.
7
Select settings for 12 x 18 (A3W) 
paper.
(1) Touch the appropriate paper type key.
Touch the key that shows the type of 12 x 18 (A3W) 
paper you loaded.
(2) Touch the [OK] key.
(3) Touch the  [OK] key.
When the [OK] key...

134
8
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
Copying of the original on the document glass begins.
If you are using the sort function or other function that requires 
all originals to be scanned before the copies are printed, you 
must use the same [START] key that you used to scan the first 
original to scan each of the remaining originals.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
 This function can be used when a right tray, a...