Sanyo Projector Plc Xu115 User Manual

1

Computer Input
Choose	Computer	 1(Digital)	by	pressing	 the	INPUT 	button	
on	 the	 top	control	 or	press	 the	COMPUTER	 button	on	the	
remote	control.
Before	 using	these	 buttons,	 correct	input	source	 should	be	
selected	through	Menu	operation	as	described	below.
Press	 the	MENU	 button	to	display	 the	On-Screen	 Menu.	
Use 	the 	Point 	
◄►	buttons 	to 	move 	the 	red 	frame	
pointer	to	the	Input	Menu	icon.1
Input MenuUse 	the 	Point 	▲▼	buttons 	to 	move 	the 	red 	arrow	
pointer 	to...



Computer Input
The	Auto	PC	 Adjustment	
function	operates	to	adjust	
the	projector.	
PC System Menu
The	PC	System	Menu	icon	
	 Selected	system	is		 	
	 displayed.
Systems	in	this	dialog	box	
can	be	selected.
PC System Menu
Customized	Mode	(1–5)	set	in	
the	PC	 Adjust	Menu	(pp.34–35).
Computer System Selection
This	projector	 automatically	 tunes	to	various	 types	of	computers	 based	on	VGA,	 SVGA,	 XGA,	SXGA,	 WXGA,	
or	 UXGA 	with	 its	Multi-scan	 system	and	Auto	 PC	Adjustment.	 If	a...



Computer Input
Auto	PC	Adjustment	function	is	provided	to	automatically	adjust	Fine	sync,	 Total	dots,	Horizontal	and	Vertical	
positions	to	conform	to	your	computer.
Move	the	red	frame	pointer	
to	 Auto	PC	 Adj.	and	press	
the	SELECT 	button.
“Please	wait...”	appears	
while	the	 Auto	PC	
adjustment	is	in	process.
PC Adjust Menu
PC	 Adjust	Menu	icon
Auto PC Adjustment
Remote Control
AUTO PC button
The 	Auto 	PC 	adjustment 	function 	can 	be 	operated 	directly	
by	pressing	the	 AUTO	PC...



Computer Input
PC Adjust Menu
Manual PC Adjustment
Some	computers	 employ	special	signal	formats	 which	may	not	be	tuned	 by	Multi-scan	 system	of	this	 projector.		
Manual	 PC	Adjustment	 enables	you	to	precisely	 adjust	several	 parameters	 to	match	 those	signal	 formats.	 The	
projector 	has 	five 	independent 	memory 	areas 	to 	store 	those 	parameters 	manually 	adjusted. 	It 	allows 	you 	to	
recall	the	setting	for	a	specific	computer.	
Press 	the 	MENU 	button 	to 	display 	the...

5

Computer Input
VacantValues	of 	“Total 	dots”,	
“Horizontal”,	“Vertical”,	
“ D i s p l a y 	a r e a 	H ” , 	a n d	
“Display	area	V”.
Close	this	dialog	box.
To store adjusted data
To clear adjusted dataThis	Mode	has	stored	
parameters.
Move	 the	red	 frame	 pointer	
t o 	t h e 	d e s i r e d 	i t e m 	a n d	
press	the	SELECT 	button.
Use	the	Point	◄►	buttons	to	adjust	the	horizontal	area	
displayed	by	this	projector.
Display area H
Use	the	Point	◄►	buttons	to	adjust	the	vertical	area	displayed...

6

Computer Input
Move	the 	red 	frame 	pointer 	to	
the 	desired 	image 	mode 	and	
press	the	SELECT 	button.
The	selected	image	mode	is	check	marked.
Image Select Menu
Normal	picture	mode	preset	on	the	projector.
Standard
Picture	mode	with	improved	halftone	for	graphics.
Real
For 	the 	image 	projected 	on 	a 	blackboard. 	See 	above 	for	
further	description.
Blackboard(Green)
Image	Select	Menu	icon
IMAGE button
Dynamic
Real
Image 1
Image 
Image 
Image Mode Selection 
Image 
For...

7

Computer Input
Use	the	Point	◄►	buttons	
to	adjust	the	setting	value.
Move	the	red	frame	
pointer	to	the	desired	
item	and	then	press	
the	SELECT 	button.
Image Adjust Menu
Image	Adjust	Menu	icon
Selected	Image	mode
Image Adjustment
Reset
Press	the	MENU	button	to	display	the	On-Screen	Menu.	
Use	the	Point	
◄►buttons	to	move	the	red	frame	pointer	
to	the	Image	 Adjust	Menu	icon.1
Use	the	Point	▲▼	buttons	to	move	the	red	frame	pointer	
to	the	desired	item	and	then	press	the	SELECT 	button	
to...

8

Computer Input
Store
Exit	the	Image	Adjust	Menu.
Quit
Store	icon
To	store	the	adjusted	data,	select	Store	and	press	the	
SELECT	button.	Use	the	Point	
▲▼buttons	to	select	one	
from	Image	1	to	4	and	press	the	SELECT 	button.	
A 	confirmation	box	appears	and	then	select	[Yes].	Stored	
data	can	be	called	up	by	selecting	an	“Image	(1–4)”	in	the	
Image	Mode	Selection	on	page	36.Image	Mode	Menu
Move 	the 	red 	frame	
pointer 	to 	an 	image	
i t e m 	t o 	b e 	s e t 	a n d	
t h e n 	p r e s s 	t h e...

9

Computer Input
Select	Digital	zoom	+.	The	 On-Screen	 Menu	disappears	 and	
“D.	 zoom	 +”	appears.	 Press	the	SELECT 	button	 to	expand	
the 	image 	size. 	Use 	the 	Point 	
▲▼◄►	buttons 	to 	pan 	the	
image.	 The	Panning	 function	can	work	 only	when	 the	image	
is	larger	than	the	screen	size.
A 	projected 	image 	can 	be 	also 	expanded 	by 	pressing 	the	
D.ZOOM	+	button	on	the	remote	control.	
To	 exit	 the	Digital	 zoom	+/–	mode,	 press	any	button	 except	
the	D.ZOOM		+/–		buttons,	SELECT,...

0

Choose	Video 	by 	pressing 	the 	INPUT 	button 	on 	the 	top	
control	or	the	VIDEO	button	on	the	remote	control.
Before	 using	these	 buttons,	 correct	input	source	 should	be	
selected	through	menu	operation	as	described	below.
Use 	the 	Point 	▲▼	buttons 	to 	move 	the 	red 	arrow	
pointer	 to	Video	 and	then	 press	 the	SELECT 	button	 to	
display	the	Source	Select	Menu.
1

Move 	the 	pointer 	to	
Video	 and	press	 the	
SELECT 	button.
VIDEO
Move	the	pointer	 to	the	 source	
that 	you...