Sanyo Projector Plc Xu115 User Manual

1

Video Input
Choose	 Computer	 2	 by	 pressing	 the	 INPUT	 button	 on	 the	
top	 control	 or	 press	 the	 COMPUTER	 button	 on	 the	 remote	
control.
Before	 using	 these	 buttons,	 correct	 input	 source	 should	 be	
selected	through	Menu	operation	as	described	below.
1
Computer 
Input Menu
Use	 the	 Point	▲▼	 buttons	 to	 move	 the	 red	 arrow	
pointer	 to	 Computer	 2	 and	 then	 press	 the	 SELECT	
button.		

After	 the	 Source	 Select	 Menu	 appeared	 for	 Computer	
2,	 move	 the...



Video Input
Video System Selection
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	
◄►	buttons	to	move	the	red	
frame	pointer	to	the	 AV	System	Menu	icon.1
AV System Menu (Video or S-Video)
AV System Menu (Component)
Use	the	Point	▲▼	buttons	to	move	the	red	arrow	
pointer	to	the	desired	system	and	then	press	the	
SELECT 	button.
If	the 	projector 	cannot 	reproduce 	proper 	video 	image,	
select	 a	specific	 broadcast	 signal	format	 from	among	 PAL,	
SECAM,	NTSC,...



Video Input
Move	the	red	frame	pointer	to	
the	desired	image	mode	and	
press	the	SELECT	button.
The	selected	image	mode	is	check	marked.
Image Select Menu
Standard
Cinema
Blackboard(Green)
For	viewing	with	the	user	preset	image	mode	in	the	Image	
Adjust	Menu	(pp.	44–45). Image1–
Image	Select	Menu	icon
Select
	the 	desired 	image 	mode 	from 	among 	Dynamic,	
Standard,	 Cinema,	Blackboard	 (Green),	Image	1,	Image	 2,	
Image	 3,	and	 Image	 4	by	 pressing	 the	IMAGE	 button	on	the	
remote...



Video Input
Image Adjustment
Press	the	MENU	button	to	display	the	On-Screen	Menu.	
Use	the	Point	
◄►	buttons	to	move	the	red	frame	pointer	
to	the	Image	 Adjust	Menu	icon.1
Use	the 	Point 	▲▼	buttons 	to 	move 	the 	red 	frame	
pointer	 to	the	 desired	 item	and	then	 press	 the	SELECT 	
button 	to 	display 	the 	adjustment 	dialog 	box. 	Use 	the	
Point	
◄►	buttons	to	adjust	the	setting	value.
Press	the	Point	◄	button	to	decrease	the	contrast;	press	the	
Point	
►	button	to	increase	the...

5

Video Input
Use	the 	Point 	◄►	buttons 	to 	adjust 	the 	gamma 	value 	to	
obtain	a	better	balance	of	contrast	(from	0	to	15).
Gamma
Press	 the	Point	◄	button	 to	decrease	 the	sharpness	 of	the	
image;	 press	the	Point	
►	button	 to	increase	 the	sharpness	
of	the	image	(from	0	to	15).
Sharpness
An	 interlaced	 video	signal	 can	be	displayed	 in	progressive	
mode.	Select	one	of	the	following	options.
	 Off 	..........	Disabled.
	 L1 	.......... 	For	an	active	picture.
	 L2	.......... 	For	a...

6

Video Input
This	projector	has	the	picture	screen	resize	function,	which	enables	you	to	customize	the	image	size.
Normal
Screen Size Adjustment
Screen MenuPress	the 	MENU 	button 	to 	display 	the 	On-Screen	
Menu. 	Use 	the 	Point 	
◄►	buttons 	to 	move 	the 	red	
frame	pointer	to	the	Screen	Menu	icon.1
Use 	the 	Point 	▲▼	buttons 	to 	move 	the 	red 	frame		
pointer 	to 	the 	desired 	function 	and 	then 	press 	the	
SELECT 	button.
Provide	the	image	at	the	4:3	normal	video	aspect	ratio....

7

Language
The	language	 used	in	the	 On-Screen	 Menu	is	available	 in	
English, 	German, 	French, 	Italian, 	Spanish, 	Portuguese,	
Dutch, 	Swedish, 	Finnish, 	Polish, 	Hungarian, 	Romanian,	
Russian,	Chinese,	Korean,	and	Japanese.
Set 	the 	red 	frame	
pointer	 to	the	 item	
a n d 	p r e s s 	t h e	
SELECT 	button.
Press	the	SELECT 	button	
a t 	L a n g u a g e , 	t h e n 	t h e	
Language	Menu	appears.
Setting Menu (Language)
Setting	Menu	icon
Setting
Setting
Auto setup
This	 function	 enables...

8

Setting
Display
Blue back
When	this	function	 is	“On,”	 a	blue	 image	 is	displayed	 while	
the	input	signal	is	not	detected.	
Keystone
T h i s 	f u n c t i o n 	i s 	u s e d 	t o 	s t o r e 	o r 	r e s e t 	t h e 	k e y s t o n e	
correction	 when	the	AC	 power	 cord	is	unplugged.	 Use	the	
Point	
◄►	buttons	to	switch	between	each	option.
	 Store 	........ 	Keep 	the 	keystone 	correction 	even 	when 	the	
AC	power	cord	is	unplugged.
	 Reset 	....... 	Release	the	keystone	correction	when	the...

9

Setting
Select	[Yes]	to	capture	
the	projected	image.	
Select	[Yes]	to	
stop	capturing.		
Capture
Logo (Logo and Logo PIN code lock settings)
Logo select
This	 function	 allows	you	to	customize	 the	screen	 logo	with	
Logo	select,	Capture,	and	Logo	PIN	code	lock	functions.
Note:
	 •	When 	“On” 	is 	selected 	in 	the 	Logo 	PIN 	code 	lock	
function, 	Logo 	select 	and 	Capture 	functions 	cannot 	be	
selected.
Capture
This 	function 	enables 	you 	to 	capture 	an 	image 	being	
projected	 to...

50

Logo PIN code lock
Setting
This	function 	prevents 	an 	unauthorized 	person 	from	
changing	the	screen	logo.
	 Off 	............ 	The	screen	logo	can	be	changed	freely	from	
the	Logo	Menu	(p.49).
	 On 	............ 	The	screen	logo	cannot	be	changed	without	
a	Logo	PIN	code.
If 	you 	want 	to 	change 	the 	Logo 	PIN 	code 	lock 	setting,	
press	 the	SELECT 	button	 and	the	Logo	 PIN	code	 dialog	
box 	appears. 	Enter 	a 	Logo 	PIN 	code 	by 	following 	the	
steps	 below.	 The	initial	 Logo	PIN	code...