Sanyo Projector Plc Xu115 User Manual
Have a look at the manual Sanyo Projector Plc Xu115 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1 Computer Input Choose Computer 1(Digital) by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Input Menu icon.1 Input MenuUse the Point ▲▼ buttons to move the red arrow pointer to Computer 1 (Digital), and then press the SELECT button. After the Source Select Menu appeared for Computer 1 (Digital), move the pointer to RGB (PC digital) or RGB (AV HDCP), and then press the SELECT button. Input Source Selection (RGB(PC digital), RGB(AV HDCP)) Move the pointer (red arrow) to Computer 1 (Digital) and press the SELECT button. Input Menu icon Move the pointer to the source that you want to select and press the SELECT button. Computer 1 Computer 1 (Analog) Video Computer COMPUTER button wired Top ControlINPUT button Computer 1 (Digital) Remote Control Computer 1 (Analog) Computer Computer 1 (Digital) Direct Operation Menu Operation Notes: • HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content delivered by DVI (Digital Visual Interface) from being c o p i e d . T h e s p e c i f i c a t i o n o f H D C P i s d e c i d e d a n d controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP. • Wired and Wireless are for the Network function. See owner’s manual “Network Set-up and Operation” . • When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.51). w ireless
Computer Input The Auto PC Adjustment function operates to adjust the projector. PC System Menu The PC System Menu icon Selected system is displayed. Systems in this dialog box can be selected. PC System Menu Customized Mode (1–5) set in the PC Adjust Menu (pp.34–35). Computer System Selection This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 70-71.) One of the following messages may appear when: The projector cannot recognize the connected signal conforming to the provided PC Systems. The “Auto” is displayed on the System Menu box and the Auto PC Adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required (pp.34-35). There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 63.) Auto ----- The preset system is manually adjusted in the PC Adjust Menu. The adjusted data can be stored in Mode 1–5 (pp.34-35).Mode 1 PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it. SVGA 1 *Mode 1 and SVGA 1 are examples. Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the PC System Menu icon. Use the Point ▲▼ buttons to move the red arrow pointer to the desired system and then press the SELECT button. 1 PC system can also be selected manually. Selecting Computer System Manually
Computer Input Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Move the red frame pointer to Auto PC Adj. and press the SELECT button. “Please wait...” appears while the Auto PC adjustment is in process. PC Adjust Menu PC Adjust Menu icon Auto PC Adjustment Remote Control AUTO PC button The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control. Direct Operation To store adjustment parameters The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1–5) in the PC System Menu (p.32). See also “Store” on page 35. Notes: • Fine sync, Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.34–35). • The Auto PC Adjustment cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i, or 1080i is selected in the PC System Menu (p.32), or when the signal is coming from the DVI-terminal. Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the PC Adjust Menu icon.1 Use the Point ▲▼ buttons to move the red frame pointer to Auto PC Adj. and then press the SELECT button twice. Auto PC Adj . Menu Operation
Computer Input PC Adjust Menu Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the PC Adjust Menu icon.1 Use the Point ▲▼ buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point ◄► buttons to adjust the setting value.Move the red frame pointer to the desired item and press the SELECT button.PC Adjust Menu icon Press the SELECT button here to adjust other items. Use the Point ◄► buttons to adjust the value. Status (Stored/Free) of the selected Mode. Selected Mode Press the SELECT button at Current mode to show the information of the connected computer. Use the Point ◄►buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31). Fine sync Use the Point ◄► buttons to adjust the number of total dots in one horizontal period to match your PC image. Total dots Use the Point ◄► buttons to adjust the horizontal picture position. Horizontal Use the Point ◄► buttons to adjust the vertical picture position. Vertical Press the SELECT button to show H-sync freq. and V-sync freq. of the connected computer. Current mode Use the Point ◄► buttons to adjust the clamp level. When the image has dark bars, try this adjustment. Clamp
5 Computer Input VacantValues of “Total dots”, “Horizontal”, “Vertical”, “ D i s p l a y a r e a H ” , a n d “Display area V”. Close this dialog box. To store adjusted data To clear adjusted dataThis Mode has stored parameters. Move the red frame pointer t o t h e d e s i r e d i t e m a n d press the SELECT button. Use the Point ◄► buttons to adjust the horizontal area displayed by this projector. Display area H Use the Point ◄► buttons to adjust the vertical area displayed by this projector. Display area V Reset Store Exit the PC Adjust Menu. Quit To store the adjusted data, select Store and then press the SELECT button. Move the red arrow pointer to one of the Modes 1 to 5 in which you want to store, and then press the SELECT button. To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. Mode free To clear the stored data, select Mode free and then press the SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button. Notes: • Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i, or 1080i is selected in the PC System Menu (p.32). • PC Adjust Menu cannot be selected when Computer 1(Digital) is selected in the Input Menu (p.31).
6 Computer Input Move the red frame pointer to the desired image mode and press the SELECT button. The selected image mode is check marked. Image Select Menu Normal picture mode preset on the projector. Standard Picture mode with improved halftone for graphics. Real For the image projected on a blackboard. See above for further description. Blackboard(Green) Image Select Menu icon IMAGE button Dynamic Real Image 1 Image Image Image Mode Selection Image For viewing with the user preset image mode in the Image Adjust Menu (pp. 37-38). Image 1~ Blackboard(Green) For viewing pictures in a bright room. Dynamic Standard Remote Control IMAGE button Select the desired image mode from among Dynamic, Standard, Real, Blackboard (Green), Image 1, Image 2, Image 3, and Image 4 by pressing the IMAGE button on the remote control. Standard Picture mode with improved halftone for graphics. Real Blackboard (Green) Image 1– For the image projected on a blackboard. T h i s m o d e h e l p e n h a n c e t h e i m a g e p r o j e c t e d o n a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board. Dynamic Direct Operation For viewing pictures in a bright room. Normal picture mode preset on the projector. For viewing with the user preset image mode in the Image Adjust Menu (pp. 37-38). This Image memory is provided in each computer, component, and video input source. Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Image Select Menu icon.1 Use the Point ▲▼ buttons to move the red frame pointer to the desired image mode and then press the SELECT button. Menu Operation
7 Computer Input Use the Point ◄► buttons to adjust the setting value. Move the red frame pointer to the desired item and then press the SELECT button. Image Adjust Menu Image Adjust Menu icon Selected Image mode Image Adjustment Reset Press the MENU button to display the On-Screen Menu. Use the Point ◄►buttons to move the red frame pointer to the Image Adjust Menu icon.1 Use the Point ▲▼ buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point ◄► buttons to adjust the setting value. Note: • When the White balance Red, Green, or Blue is adjusted, the Color temp. level will change to “Adj.”. Press the Point ◄ button to decrease the contrast; press the Point ► button to increase the contrast (from 0 to 63). Press the Point ◄ button to decrease the brightness; press the Point ► button to increase the brightness (from 0 to 63). Contrast Brightness Press the Point ◄ button to lighten red tone; press the Point ► button to deepen red tone (from 0 to 63). white balance (Red) Press the Point ◄ button to lighten green tone; press the Point ► button to deepen green tone (from 0 to 63). white balance (Green) Press the Point ◄ button to lighten blue tone; press the Point ► button to deepen blue tone (from 0 to 63). white balance (Blue) Use the Point ◄► buttons to select the desired Color temp. level (High, Mid, Low, or XLow). Color temp . Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Gamma Press the Point ◄ button to decrease the sharpness of the image; press the Point ►button to increase the sharpness of the image (from 0 to 15). Sharpness To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures.
8 Computer Input Store Exit the Image Adjust Menu. Quit Store icon To store the adjusted data, select Store and press the SELECT button. Use the Point ▲▼buttons to select one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select [Yes]. Stored data can be called up by selecting an “Image (1–4)” in the Image Mode Selection on page 36.Image Mode Menu Move the red frame pointer to an image i t e m t o b e s e t a n d t h e n p r e s s t h e SELECT button. A confirmation b o x a p p e a r s and then select [Yes] This projector has the picture screen resize function, which enables you to customize the image size. Screen Menu Screen Size Adjustment Provide the image to fit the screen size. Normal True Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point ▲▼◄►buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear. Full Provide the full screen image. Notes: • The Screen Menu, except for "Normal" and "Custom", cannot be operated when 720p(HDTV), 1035i (HDTV), or 1080i (HDTV) is selected in the PC System Menu (p.32). • T h i s p r o j e c t o r c a n n o t d i s p l a y a n y resolution higher than 1600 x 1200. If your computer ’s screen resolution is higher than it, reset the resolution to the lower before connecting to the projector. • The image data in other than 1024 x 768 is modified to fit the screen size in initial mode. • True, Full, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.32). Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Screen Menu icon.1 Use the Point ▲▼ buttons to move the red frame pointer to the desired function and then press the SELECT button. wide Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16:9. M o v e t h e r e d f r a m e pointer to the function and press the SELECT button. Screen Menu icon
9 Computer Input Select Digital zoom +. The On-Screen Menu disappears and “D. zoom +” appears. Press the SELECT button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM + button on the remote control. To exit the Digital zoom +/– mode, press any button except the D.ZOOM +/– buttons, SELECT, and Point buttons. Digital zoom + Select Digital zoom –. The On-Screen Menu disappears and “D. zoom –” appears. Press the SELECT button to compress image size. The projected image can be also compressed by pressing the D.ZOOM – button on the remote control. Digital zoom – To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (pp.30-31) again, or adjust the screen size with the D.ZOOM +/– buttons. For zooming in and out the images Notes: • The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used (p.35). • Minimum compression ratio can be limited depending on the input signal or when the Keystone function is working. • True, Full , and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.32). • Digital zoom +/- cannot be selected when Full or True is selected. Remote Control D.ZOOM + button POINT ▲▼◄► buttons SELECT button D .ZOOM - button A d j u s t t h e s c r e e n s c a l e a n d p o s i t i o n m a n u a l l y w i t h t h i s function. Press the SELECT button at Custom and the “Custom” is displayed on the screen for a few seconds and then the Aspect dialog box appears. Scale H/V .......... Adjust the Horizontal/Vertical screen scale. H&V ................... W h e n s e t t o “ O n , ” t h e a s p e c t r a t i o i s fixed. The “Scale V” appears dimmed and becomes unavailable. Adjust “Scale H,” then the screen scale is automatically modified based on the aspect ratio. Position H/V ....... A d j u s t t h e H o r i z o n t a l / Ve r t i c a l s c r e e n position. Common ............ Save the adjusted scale to all the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at “Yes.” When Custom is selected, the saved scale is used. Reset ................. R e s e t t h e a l l a d j u s t e d v a l u e s . P r e s s the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.” Custom Notes: • When no signal is detected, “Normal” is set automatically and the Aspect dialog box disappears. • The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. Press the SELECT button at Common or Reset, to display a confirmation box.
0 Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. Use the Point ▲▼ buttons to move the red arrow pointer to Video and then press the SELECT button to display the Source Select Menu. 1 Move the pointer to Video and press the SELECT button. VIDEO Move the pointer to the source that you want to select and press the SELECT button. Source Select Menu (VIDEO) Input Menu Move the pointer to the desired source and then press the SELECT button. Input Source Selection (Video, S-video) Input Menu icon Video Input Computer 1 (Analog) Video Computer INPUT button VIDEO button wired Top ControlINPUT button Computer 1 (Digital) Remote Control Direct Operation Menu Operation Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Input Menu icon. When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order: 1. S-video 2. Video Auto When video input signal is connected to the VIDEO jack, select Video.Video When video input signal is connected to the S- VIDEO jack, select S-video.S-video Notes: • Wired and Wireless are for the Network function. See owner’s manual “Network Set-up and Operation” . • When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.51). w ireless