Sanyo Projector Plc Xc56 User Manual
Here you can view all the pages of manual Sanyo Projector Plc Xc56 User Manual. The Sanyo manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
1 ENGLISH Setting up the projector Item Description Key lock .................. Sets the prohibition of controls either Projector or Remote control. (OFF, Projector keys, Remote control) Lamp Corres. Value(h) .................. Displays the lamp use time (Corresponding value) . Reset the time after lamp replacement. Click "Reset", a confirmation display appears, and then click "OK", the time will be reset. Filter counter(h) ............ Displays the filter counter....
Page 42
Chapter 4 Controlling the Projector Information This page is to display the basic information of the projector status. Click Information on the main menu. Items Description Input Displays selected input and source.System Displays selected signal system.Signal Input signal status (Yes, No)Screen Displays screen mode.Lamp status Displays lamp status with an animation. Refer to the table as shown in the next page.Security Displays the security (PIN code lock) status (Yes,...
Page 43
ENGLISH Indication of the lamp status Icon display/backgroundStatus White-Yellow/BlueLamp on (Normal) White-Yellow/RedLamp on (Lamp is being used over a specified use time, replace lamp immediately) Gray/BlueLamp off (Normal) Gray/RedLamp off (Lamp is being used over a specified use time, replace lamp immediately) Red/Blue with XLamp failure (Lamp failure, check lamp condition) Red/Red with XLamp failure (Lamp failure and lamp is being used over a specified use time, replace lamp...
Page 44
Chapter 4 Controlling the Projector
Page 45
ENGLISH 4 ENGLISH Chapter Appendix 5 Connection examplesUse of telnet Web browser setting Technical data Q & A
Page 46
Chapter 5 Appendix Examples of connection Peer-To-Peer connection Connecting the projector (PJ01) to the control computer (PC05) directly. Projector Name: PJ01IP Address : 192.168.0.2Subnet Mask : 255.255.255.0Default Gateway : 0.0.0.0DNS : 0.0.0.0 Computer Name: PC10IP Address : 192.168.0.10Subnet Mask : 255.255.255.0Default Gateway : DNS : Computer Name: PC05IP Address : 192.168.0.5Subnet Mask : 255.255.255.0Default Gateway : DNS : Hub Projector Name: PJ01 IP Address : 192.168.0.2...
Page 47
ENGLISH The gateway (Router) installed in the network Connecting the projector (PJ01) to the control computer (PC05) via the gateway. To another network Network Group: 192.168.200.x Network Group: 192.168.10.x Projector Name: PJ01 IP Address : 192.168.200.15 Subnet Mask : 255.255.255.0 Default Gateway : 192.168.200.1 DNS : 192.168.201.1 Computer Name : PC205 IP Address : 192.168.200.5 Subnet Mask : 255.255.255.0 Default Gateway : 192.168.200.1 DNS : 192.168.201.1 IP Address :...
Page 48
Chapter 5 Appendix Use of telnet You can control the projector by using the telnet application*1 installed on your computer. Normally, the telnet application is available on your computer. * The telnet 10000 port is used to control the projector. Control (For example, in case of using the telnet application of Windows XP Professional.) 1. Select Run... submenu from Start menu on the computer. Type "telnet" onto the Open text area on the displayed window and press OK...
Page 49
ENGLISH 3. When communication is established correctly, the word "PASSWORD:" appears on the window. Type the login password (Network PIN code*2) for the projector and then press "Enter" key on the keyboard. If you do not set up the Network PIN code, just press "Enter" key. When the word "Hello" is replied, login has been succeeded. * The password "1234" is used for the example. 4. Type the commands, refer to below table, to control...
Page 50
50 Chapter 5 Appendix Web browser setting This projector is designed to be set up and controlled from an Internet web browser. Depending on the preference settings of the web browser, some control functions may not be available. Please make sure that the following functions are set up properly in the web browser. Active Script/JavaScript enable There are some control items used with the JavaScript function in the setting pages. If the web...