Sanyo Projector Plc Xc56 User Manual

ENGLISH

11
ENGLISH
Chapter 2 
 Setup Procedures
2
Describes how to configure the network. 

1

Chapter 2 Setup Procedures

Setting Procedure
Setting procedures and contents differ depending on the LAN installation location.  
When installing, consult your system administrator to set up the LAN appropriately.
Connect the LAN cable to the LAN connection terminal of the projector.
Network configuration
Set the Wired LAN network through the projector menu. Detailed network settings will be 
made  with  browser.  Refer  to  “3.  Basic  setting  and  operation”  (p.17-30).  First,  complete...

1
ENGLISH

 

*1 Set "On" only when the DHCP server is available on your network environment.*2 Set [255.255.255.255] if the network does not provide the gateway (router).*3 Set [255.255.255.255] if you do not use the function E-mail alert.
3.  Select  "Network  setting"  in  the  Network  menu  and  press SELECT  button,  and  then  the 
LAN setting screen will appear and selected LAN settings will be displayed. Adjust each 
item  to  the  setting  environment.  Consult  your...

1

Chapter 2 Setup Procedures

The Network PIN code is to restrict the access from the networks to the projector.
After  setting  the  Network  PIN  code,  you  need  to  enter  it  to  operate  the  projector  via  the 
networks.
Network PIN code
Network information
1. Select "Network PIN code" in the Network menu, and press SELECT button. 
  The Network PIN code screen will appear.
2. Set the Network PIN code.
Set the figures with the Point ed buttons and move to the next items with the...

15
ENGLISH

 

Network factory default
1. Select “Network factory default” in the Network menu and press SELECT button.
2. A confirmation box appears and select "Yes" and then press SELECT button.
3. Another confirmation box appears and select "Yes" and then press SELECT button.
4.   All  the  wired  LAN  settings  will  go  back  to  the  factory  default  settings.  For  details,  refer  to 
“Wired LAN factory default settings” (p.16).
Network factory default 

1

Chapter 2 Setup Procedures
Wired LAN factory default settings
ParameterSELECTED	LAN
LAN	1 LAN	2LAN	3
IP	CONFIGURATION
MANUALDHCPMANUAL
IP	ADDRESS
169.254.100.100192.168.100.100192.168.100.100
SUBNET	MASK
255.255.0.0255.255.255.0255.255.255.0
GATEWAY	ADDRESS
255.255.255.255255.255.255.255255.255.255.255
DNS	ADDRESS
255.255.255.255255.255.255.255255.255.255.255 

ENGLISH

17
ENGLISH
Chapter 3 
 Basic Setting and Operation
3
Describes  basic  operations  and  settings  for  controlling  the  projec-
tor  by  using  the  web  browser.  It  is  required  that  computer  and 
projector  is  connected  to  the  network  and  the  network  address  is 
properly configured. 

1

Chapter 3 Basic Setting and Operation

Login the setting page of the projector
[1] Enter the IP address
Launch  the  web  browser  installed  in  your 
computer,  enter  the  IP  address  into  the 
"Address"  on  the  browser  and  then  press 
"Enter" key.
Enter  the  address  that  you  configured  in 
item "Network configuration" (+ p.12).
[2] Login
 
If  the  setting  page  has  set  the  password,  the  authentication  window  will  appear.  In  this 
case  type...

1
ENGLISH

 

[3] Display of main setting page
The  following  main  set ting  page  will  be  displayed  according  to  your  display  mode 
selection. Perform various kinds of settings through this page. Click on the menus to dis-
play the control and setting pages.
Main setting page in the display
Setting page
Displays the control and setting items according to the selected menu.
Main menu
For selection of  control and setting items of the projector. 
Sub menu tabSwitches the sub menu tab.
Login...

0

Chapter 3 Basic Setting and Operation

How to use the setting page
To control and set up the projector, use the setting menus on the web browser. Describes the 
basic operation and procedures commonly used on this manual.
The  setting  menu  appears  when 
clicking the sub menu tab. 
* Each item has a valid setting range respectively.
Example of the setting page
✐		The value in the text box indicates current value.
✐ 
  Each item has a valid setting range. The setting value exceeding this...